10 Best
Abn Plier Sets
-
-
Product Highlights
- 9 sae sizes: standard sae inside diameter sizes include (30) 1/16”, (30) 1/8”, (40) 3/16”, (50) 1/4", (50) 3/8”, (40) 1/2", (20) 5/8”, (20) 3/4", (20) 7/8”; sizes are measured as inner diameter (id)
- Easy storage: transparent 8.25” x 4.25” x 1.25” inch (21cm x 10.8cm x 3.2cm) clear plastic carrying case for easy transportation, safe storage, and quick organization; (9) divided compartments that contain 9 different sizes; size chart is included
- Secure hold retention fasteners: the abn e-clip external retaining ring washer 300-piece assortment set sae 1/16” to 7/8” inch – circlip snap retainer rings is ideal for a variety of securing tasks such as retention of machinery, automotive, gear shafts, bearings, pulleys, and more; save trips to the hardware store and repair the parking brake on your car or perform any...
- Built to last: constructed from heat-treated, hardened steel with a black oxide finish for ultimate strength that is not thin or flimsy and offers protection against harmful rust and corrosion; use lubricant or grease to maximum rust prevention
- Package contents: package includes (300) e-clips - 1/16”, 1/8”, 3/16”, 1/4", 3/8”, 1/2", 5/8”, 3/4", 7/8” and (1) storage case for your convenience; e-clip installation/removal tool not included
SHOWview product -
Product Highlights
- [adjust your grip]: push-button allows you to adjust the width of the head in multiple steps to fit whatever you are working on; unlike alligator jaw slip wrench pliers, these lockjaw pliers prevent unintentional shifting or joint slippage
- [safety first]: carbon-hardened (58 hrc) chrome-vanadium steel (cr-v) and manganese phosphate coating ensure maximum strength and longevity; corrosion-resistant plumbers wrench pliers tool set features a pinch guard to prevent injuries to your hands and fingers
- [grip, hold, press, or bend]: ensure optimal grip and power with the abn 3 piece slip joint plier set adjustable wrench set; groove joint pliers serrated gripping jaw fits round, square, hex, or flat fasteners; includes 7-inch, 10-inch, and 12-inch-long pliers wrenches (17.8, 25.4, and 30.5cm)
- [comfortable control]: rubberized plastic-coated handles offer the best gripping position, and with the slim design and low-profile head, you can easily fit these plumber pliers into tight spaces
- [convenient storage]: 10.5 x 17 (26.7 x 43.2cm) canvas pouch with pockets rolls up and fastens closed to allow easy transportation and organization; rolls up to 10.5 x 3.6 x 1.8 inches (26.7 x 9.1 x 4.4cm); metal grommets also allow for optional hanging in your storage shed or garage
SHOWview product -
Product Highlights
- Built to last: constructed of forged metal, this car fuse puller tool is designed for strength, durability, and longevity; pvc grips offer a comfortable and stable grip that provides relief to avoid user fatigue; 11.5-inch (29.2 cm) length allows for extra reach while 4.5-inch (11.4 cm) maximum jaw opening allows for versatility
- Easy to use: simply open the jaws to the necessary width and allow jaws to become flush to each side of the relay you wish to pull out; apply gentle pressure to the offset handles and pull upwards to remove the electrical relay
- Easily remove relays and fuses from tight spaces: use the abn relay and fuse puller pliers to quickly remove electrical relays and fuses that are closely set together or set in awkward to reach spaces; this tool is a must-have for professional mechanics and automotive hobbyists
- Specially designed tips: each automotive fuse puller relay tool features thin jaws and angled tips; the thin jaws easily slide between tightly grouped electrical relays and fuses, while the angled tips clasp around the bottom of the relay or fuse so you can gently pull out the part without damage
- Fits your needs: relay and fuse pliers are designed to work on many heavy-duty and industrial applications for most domestic and imported vehicles; whether working on auto or aircrafts this specialty pliers tool will help get the job done quickly
SHOWview product -
Product Highlights
- The device can press and press the ear clamp on the dust cover of the cv joint and install the quick clamp on the fuel filter and that of the cooling system.
- Adopts a non-slip, ergonomic design, comfortable and slip resistance.
- High hardness after heat treatment
- Made of excellent alloy material and durable.
- Small and easy to use.
SHOWview product -
Product Highlights
- [adjustable tongue]: push buttons extend the head in multiple steps; 7-inch pliers wrench tool opens as wide as 2.2 inches (5.6cm) 10-inch opens to 3 inches (7.6cm); 16-inch opens to 6 inches (15.2cm)
- [built to last]: high-quality chrome-vanadium steel ensures maximum strength and longevity; rubberized handles on engineer pliers offer optimal gripping power for comfortable use
- [grip, hold, press, or bend]: whether removing nuts and bolts or repairing water and heat pipes and lines, the abn large water pump pliers set will help you get the job done; tongue and groove pliers set includes a 7, 10, and 16-inch (17.8, 25.4, and 40.6cm) long tool and storage case
- [secure grip]: jaw teeth ensure optimal ribbed grip and controlled power on square, round, and hex fasteners or on pipes; groove joint pliers sets will prevent unintentional shifting
- [convenient storage]: 9.8 by 18.5-inch (24.9 x 47cm) polyester pouch with alligator plier pockets rolls up for easy travel and organizing; metal grommets also allow you to hang in your garage
SHOWview product -
Product Highlights
- Easy removal: socket end of tool removes the spring from an anchor stud so you can fully replace the shoe return spring
- Better visibility: offset cutaway portion of tool allows better visual alignment of pin and washer so you can see what you are doing
- Work on drum brakes: the abn drum brake shoe return spring install & remove dual-end pliers installer & remover tool for removal and installation is a 2-in-1 double-ended tool that allows you to save time and effort when removing, replacing, and installing shoe return springs on most drum brakes; this tool acts as a second pair of hands so you can remove and install spr...
- Easy installation: notched end of tool installs spring on anchor; slotted arm guides the spring hook into position in the anchor hole while the handle end is used to fasten the post of the anchor-type springs
- Built to last: constructed from chrome-plated steel for ultimate strength, longevity, and resistance to rust that makes this tool simple to clean; 11.5-inch (29.2cm) overall length – 7-inch (17.8cm) maximum jaw opening, 4.5-inch (11.4cm) handle
SHOWview product -
Product Highlights
- Easy to use: select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool; hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material; the pin point is spring-loaded and retracts into handle when punching a hole; pin point is removable to ...
- Easy storage: heavy-duty 10” x 1.8” x 7.5” inch (25.4cm x 4.6cm x 19.1cm) blow-molded plastic carrying case with built-in latches and handle for easy transportation, safe storage, and quick organization; each compartment is labeled by both sae and metric sizes for quick identification
- Eliminate guesswork: punch accurate washers and gaskets with the abn | 13 in 1 hole punch kit hollow leather punch set; this hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is ha...
- Built to last: hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue and more productivity
- Package contents: leather hole punch set package includes (1) storage case, (1) pin point punch shaft, and (13) hole punch head sizes – 3/16" (5mm), 1/4" (6mm), 5/16" (8mm), 3/8" (10mm), 7/16" (11mm), 1/2" (13mm), 5/8" (16mm), 3/4" (19mm), 7/8” (22mm), 1” (25mm), 1‐1/8” (28mm), 1‐1/4” (32mm), 1‐3/8” (35mm)
SHOWview product -
Product Highlights
- Revolutionize your tool organization: this tool storage organizer offers an elegant and simple way to store all the various tools you may have sprawled out in your tool box; clean up your shop and create space in your drawers by using your plier rack as a wrench holder, socket tray, screwdriver organizer, and general tool holster
- Simple functionality: the abn welding pliers and wrench rack is designed for easy access to your most used tools while organizing your tool box drawers and creating more space; removal and insertion are easy, just pick the pliers up and slide right back into place when done
- Built to last: the abn 16 piece black tool box organizers and storage racks are constructed of heavy duty stainless steel; the black vinyl coating protects the tool sorter from rust and corrosion and prevents tools from slipping out of place
- Grab the right pair the first time: you no longer have to hide the clutter thanks to your new toolbox drawer organizer; this elegant wire pliers rack organizer allows you to display your tools on a shelf or table providing easy access to your most used wrenches, pliers, and screwdrivers; this allows you to grab the exact set your looking for every time
- Perfect fit: these tool drawer organizers are the perfect tool box accessories when you begin to consider design and sizing; this plier holster features sixteen spaces that are 3/4-inch (20mm) apart for you to store or display your various tools; it stands roughly 2.5 inches (6.4cm) from any surface you lay it on making it the perfect tool box drawer organizer; while th...
SHOWview product -
Product Highlights
- Easy to use: simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose; plier jaws swivel to ensure a complete shut off
- Various applications: small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink; medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank; this entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel lin...
- Save coolant & save time: the abn hose pincher pliers 3-piece crimping pinch-off tool set – automotive pinching radiator, coolant, heater, fuel pinch is a lifesaver when performing fuel line or coolant maintenance; easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements; no need to ...
- 3-in-1 set: package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area
- Built to last: plastic hose pinchers do not work efficiently and can easily become misaligned, break, or even damage your application hoses; this metal pliers set is extremely durable and safe to use on all hoses; all 3 pliers in set include metal serrated teeth that are strong and make it much quicker and easier than attempting to zip tie the hoses
SHOWview product -
Product Highlights
- [grip comfortably]: non-slip red polypropylene (pp) and black thermoplastic rubber (tpr) 4.7-inch (11.9cm) handles; ambidextrous design (use with either hand); pull handles together while ratchet click locks until you compress jaws fully together; terminal compression adjustment on handle
- [easy storage]: heavy-duty 11 x 2 x 7.5-inch (27.9 x 5.1 x 19.1cm) plastic blow-molded case for easy transportation, safe storage, and quick organization; individual terminal compartments are labeled for simple identification
- [secure terminals to wire]: the abn ratcheting wire crimper tool with dies performs uniform crimps; most wire stripper crimper jaws feature a double crimp style to either single crimp or crimp both insulation and wire connect simultaneously; use insulated terminal die on heat shrink wire connectors; swap jaw sizes by sliding and clicking dies into crimp wire tool
- [quality you need]: pre-oiled dies constructed from heat-treated alloy steel with wax-lost casting and zinc phosphate surface treatment; ratchet wire crimping tool terminal crimper plier made of carbon steel and black-oxide finish; ratchet crimping tool works with electrical connections on a large range of awg
- [contents]: wire crimp tool terminal package includes 1 ratcheting wire terminal crimper tool, 5 dies (insulated a jaw awg 22-18/16-14/12-10; non-insulated b jaw awg 20-18/16-14/12-10/8; open barrel c jaw awg 20-18/16-14/12-10; insulated cord-end d jaw small awg 22/20/18/16/14/12; insulated cord-end f jaw huge awg 10/8/6), and 1 carrying case
SHOWview product
Coupon copied
