10 Best
Air Filtration For Laser Engravers
-
Product Highlights- 【healthy creation】the d2 air purifier can isolate the contaminants produced during the laser cutting process, such as pm2.5/pm10, formaldehyde, tvocs, etc.
- 【long life】a single filter element can be used for about three hours a day in normal laser cutting wood board, and can work continuously for 3 months, and the single continuous working time can reach 200h, giving you long-term efficient protection.
- 【99.5% filtration rate】atomstack maker d2 air purifier has a 3-layer filter element that is specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.5%. (atomstack laboratory test data).
- 【no workspace limitations】you no longer need to worry about a workspace for laser cutting. using atomstack maker's protective cover and air purifier means there’s no need to be concerned about smoke expulsion and air pollution. you can safely work in your garage, basement, or workshop.
- 【easy to replace】after using it for a period of time, you can replace the filter element to obtain a new purifier. moreover, the replacement operation is simple that you don't need to disassemble the circuit, and the filter element can be quickly replaced in five minutes.
SHOWview product -
Product Highlights
- Contribute to environmental protection: discharging the cutting waste gas directly into the atmosphere will cause more pollution, so use an air purifier to make the air fresh;
- Break through the limitations of the working environment: no longer need to worry about the laser cutting workplace, use the protective cover and air purifier of atomstack maker, no need to worry about smoke exhaust and air pollution, you can work safely in your garage, basement, or workshop;
- Designed for laser cutting: atomstack maker d2 air purifier, a 3-layer filter element specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.5% (atomstack laboratory test data).
- Healthy creation: use the atomstack maker air purifier, and say goodbye to all polluting gases: pm2.5/pm10/formaldehyde/tvoc, etc. health is priceless, for the health of you and your family, please do a good job of safety protection;
- Long life: a single filter element can be used for about three hours a day in normal laser cutting wood board, and can work continuously for 3 months, and the single continuous working time can reach 200h, giving you long-term efficient protection;
SHOWview product -
-
-
Product Highlights
- 【efficiently filters harmful particles】all-round purification of various harmful pollutants produced during laser engraving and cutting of wood, leather, and acrylic (pm2.5/pm10/formaldehyde/tvoc, etc.) effectively purify the air, eliminate invisible threats, protect your family's health.
- 【long service life】a single filter cartridge can work continuously for 3-6 months under regular use for laser cutting wood boards, about three hours per day. a single continuous working time can reach up to 200 hours, providing you with efficient protection for a long time.
- 【7 layer filter element】atomstack maker d2 air purifier, developed with a 7-layer filter cartridge specifically for filtering out odors and harmful substances produced during laser cutting, with a filtration rate of 99.97%.
- 【255m³/h high efficient purification】double-layer activated carbon +hepa filter stably adsorbs harmful substances and eliminates unpleasant odors, keeping the air fresh for a long time. upgraded filter, purification efficiency is increased by 260%.
- 【high compatibility】atomstack maker d2 air purifier can be compatible with protective box products from all atomstack, o*tur, n*je, x*ool, s*ulpfun and more brands. with the d2 air purifier, there is no need to worry about smoke or air pollution. you can work safely in your garage, basement, or workshop.
SHOWview product -
-
Product Highlights
- 【99.5% filtration rate】atomstack maker d2 and ap2 air purifier replacement element both have a 3-layer filter element that is specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.5%. (atomstack laboratory test data).
- 【no workspace limitations】you no longer need to worry about a workspace for laser cutting. using atomstack maker's protective cover and air purifier means there’s no need to be concerned about smoke expulsion and air pollution. you can safely work in your garage, basement, or workshop.
- 【affordable pairing】the package includes a d2 air purifier and a ap2 replacement filter that a single filter element can work continuously for 3 months. it is cost-effective to replace the filter element, and also give you long-term efficient protection.
- 【healthy creation】the d2 air purifier can isolate the contaminants produced during the laser cutting process, such as pm2.5/pm10, formaldehyde, tvocs, etc.
- 【easy to replace】after using it for a period of time, you can replace the filter element to obtain a new purifier. moreover, the replacement operation is simple that you don't need to disassemble the circuit, and the filter element can be quickly replaced in five minutes.
SHOWview product -
Product Highlights
- Upgraded filter: d2 air purifier purification efficiency is increased by 260%, double-layer activated carbon + hepa filter stably adsorbs harmful substances and eliminate unpleasant odors, keep the air fresh for a long time.
- Break through the limitations of the working environment: no longer need to worry about the laser cutting workplace, use the protective cover and air purifier of atomstack maker, no need to worry about smoke exhaust and air pollution, you can work safely in your garage, basement, or workshop.
- Designed for laser cutting: atomstack maker d2 air purifier, a 3-layer filter element specially developed for laser cutting, can effectively filter the odor and harmful substances generated by laser cutting, with a filtration rate of 99.5% (atomstack laboratory test data).
- Healthy creation: use the atomstack maker air purifier, and say goodbye to all polluting gases: pm2.5/pm10/formaldehyde/tvoc, etc. health is priceless, for the health of you and your family, please do a good job of safety protection; just three steps, no need to disassemble the circuit, and quickly replace the filter element in five minutes.
- Long life: atomstack d2 smoke filter purifier can be adapted to all protective box products of atomstack, ortur, nej*e, xtoo*l and other brands. a single filter element can be used for about three hours a day in normal laser cutting wood board, and can work continuously for 3 months, and the single continuous working time can reach 200h, giving you long-term efficient p...
SHOWview product -
Product Highlights
- 32-bit high-speed motherboard: the aic1 air assist kit is equipped with the latest atomstack highcalculus motherboard, which has faster processing speeds and can increase engraving productivity by up to 30%.
- Safety protection: aic1 controller with emergency stop button and reset button can provide you with a safer working experience. you can also select the touch control panel to achieve offline engraving.
- M7 automatic control air assist switch: when using the aic1 air assist control set, you can use the lightburn software m7 mode to automatically turn the air assist on and off depending on the engraving or cutting, saving energy and improving the life of the air assist.
- Wifi offline working: aic1 motherboard with wifi module, you can upgrade wifi offline control function. you can control the machine offline with the atomstack mobile app
SHOWview product -
Product Highlights
- Contributes to the protection of the environment: removing cutting waste directly into the atmosphere causes more pollution, then use an air purifier to make the air fresh;
- Break through the limits of the work environment: no longer need to worry about the laser cutting workplace, use the protective cap and air purifier from atomstack maker, no need to worry about smoke, exhaust and air pollution
- Designed for laser cutting: the air purifier atomstack maker d2, a 3-layer filter element specially developed for laser cutting, can effectively filter the odours and harmful substances caused by laser cutting with a filter speed of 99.5%.
- Health-promoting - use the air purifier atomstack maker and say goodbye to all environmentally harmful gases: pm2.5/pm10/formaldehyd/tvoc, etc. health is priceless, for the health of you and your family, do a good job of safety protection;
- Long service life: one filter element can be used in normal laser cutting plates for about three hours a day, and can be used continuously for 3 months, and the separate continuous working time can reach 200 hours, so you have long-term effective protection
SHOWview product
Coupon copied
