10 Best
Tile Hole Cutters
-
Product Highlights- 【quick drilling】the hole diameter of this diamond drilling bit is divided into three sizes: 60/70/100mm. the head is designed with a cutting port, and the middle is an oval chip outlet design, which is convenient for quick chip removal, improves efficiency, and makes cutting and drilling faster. and the hole opener has a smooth surface and is easy to clean.
- 【high quality diamond material】the drilling opener is made of high-quality diamond material by brazing process. the hole drill bit is evenly plated with thickened emery, cutting sharp, wear-resistant and durable. it is specially developed for superhard materials such as marble, ceramic tile, stone, wall and other. the drilling is neat, smooth and without broken edges.
- 【wet and dry use】the diamond brazed hole saw can be used wet or dry. when drilling, you can choose to add water or not to add water according to the actual situation.however, please note the heat level of the drill bit when dry drilling. if it is too hot, please wait for the hole saw to cool down before continuing to drill. it can be drilled continuously by adding water.
- 【simple operation】you only need to fix the diamond drill bit firmly and correctly on the electric drill, turn on the electric drill, let the drill bit rotate in the air, check if there is any balance problem, then tilt the drill bit 45 degrees and drill down gently, open the positioning crescent groove, and then vertical the electric drill, quick and smooth drilling.
- 【universal shank】the drill shank of the brazed hole opener is mitsubishi anti-skid shank, which has large torque, stable clamping, no slippage, not easy to break, and strong applicability. it is suitable for bench drills, pistol drills, lithium drills and other models. brazing drill bit is small in size, light in weight, and very convenient to install and carry.
SHOWview product -
Product Highlights
- Drilling a precise hole: with pilot center drill bit design, avoids the hassle of slipping and makes drilling holes in tiles easy and precise.
- Use instructions: keep drilling vertically, when a round slot is drilled you can remove the centring bit and continue drilling. keep the rpm 500-800 and use water to keep it cooling for last long.
- Diamond core hole saws: made of carbon steel with diamond coated hole saw drill bit, ideal for drilling on tile, porcelain, glass, marble, ceramic etc.
- Longer service life: thicken and uniform diamond coated provide a superior performance and longer service life, large clearance hole on lateral side allow for water to keep cooling and remove chips faster.
- How we’re different: we aim to inspire customers to live a more convenient and secure lifestyle. we have a professional products monitoring team focusing on all the details.
SHOWview product -
Product Highlights
- 💎【 diamond coating top】： each hole is smooth and precise surface treatment, and the thick diamond coating on the top can provide excellent cutting strength to achieve the maximum drilling effect.
- ✅【wide usage】：this glass drill bit set contains 15 different drill bits to meet various needs. it is used to drill hard surfaces such as glass, wood, ceramic tile bottles, block jars, ceramics, slate, granite pumice, etc.
- 💎【high-quality drill bits】: these diamond drill bits are made of industrial-grade carbon steel, with a nickel-plated coating to resist corrosion; fine workmanship, super wear-resistant, and sharp.
- 💎【large clearance holes】: these glass hole saws are arranged along the drill bit to facilitate the escape of chips and other particles when cooling water enters and drills. make the drilling process easier.
- ⚠【note】: when cutting hard materials, be sure to keep the tool cool to avoid damage to the material being drilled and premature wear of the tool; water lubrication is required when drilling, which can prolong the service life of the drill set.
SHOWview product -
-
Product Highlights
- 【15 different size diamond drill bit set】6mm (1/4 "), 8mm (5/16"), 10mm (3/8 "), 12mm (1/2"), 14mm (9/16 "), 16mm (5) / 8 "), 18mm (11/16"), 20mm (3/4 "), 22mm (7/8"), 25mm (1 "), 26mm (1-1 / 32"), 28mm (1-3) / 32 "), 30mm (1-1 / 8"), 40mm (1-1 / 2 "), 50mm (2"). meet your different needs.
- 【great helper for you】it can be attached to electric drills, rechargeable screwdrivers, and drilling machines to drill holes in glass, tiles, as well as marble and granite.help you with home modification, wine bottle craft, glass or procelain pot modification.
- 【premium quality】made of high-strength carbon steel with a smooth nickel-plated surface, the glass drill bit has a low minimum resistance and makes it easy to drill precision holes.
- 【adjustable drill guide】no need to worry about scratching your tile when drilling the hole. our adjustable hole saw drilling guide with suction cup and 4 bearings.from 6mm to 50mm all the hole saws can fit in this guide.
- 【warm tips】reducing drill speed, lower drill pressure and increasing the use of water lubrication will significantly extend the life of the drill bit.
SHOWview product -
Product Highlights
- Sophisticated design : the central guide hole and the side hole help to easily remove the chip material, increase the drilling speed and extend the service life.
- 15 sizes : 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 26mm, 28mm, 30mm, 40mm, 50mm, which can meet most of your needs.
- Premium material : made of iron and diamond materials, strong and durable, corrosion-resistant, and can be used for a long time.
- Operation : when cutting hard materials, ensure that the cutter stays cool, and water lubrication is required when drilling, which can extend the service life.
- Scope of application : suitable for drilling holes in glass, concrete, marble, ceramic tiles, ceramics, slate marble, granite light stone, etc.
SHOWview product -
Product Highlights
- High performance - guoqee 22mm diamond drill bits are engineered with electroplated diamond technology for up to 2x longer life and 2x faster drilling than standard diamond hole saw
- Easy to use - slotted for easy plug removal. fits standard 22mm chuck drills.
- Widely application - 22mm tile hole saw designed for easy, accurate and smooth drilling of holes on porcelain tile, ceramic tile, marble tile, glass, granite and quartz countertop
- Make project easily - comes with guiding drill bit, this 22mm tile drill bit is easy to use in your creating bathroom and kitchen fittings or some plumbing installations. provide a cleaner edge free of chips or burrs
- 100% satisfaction guranteed: if you are dissatisfied with guoqee 22mm diamond hole saw for any reason, return your order within 90-days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. we appreciate all your remarks and comments. they are the key tools to develop and improve our ceramic tile hole saw
SHOWview product -
Product Highlights
- Rustless & durable ----- the tile hole cutter made of high strength carbon steel with smooth nickel plated surface to extend the service life. the cutting piece at least six months to a year before grinding.
- Multipurpose ----- our diamond drill bit is suitable for drilling glass, tile bottles, blocks jars, fiber glass porcelain tile ceramic, vitrified, brick and stone.(especially for glass and tile)
- Available in 10 sizes(diameter) ----- our tile hole saw set has 10 pcs different size 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm, 40mm, 50mm. suitable for your different needs.
- Faster, sharp and smooth cut ----- tip head of diamond hole saw coated with high quality diamond to enhance fast and precision cutting for a sharp, high precision and smooth cut with no broken edges in seconds.
- Note ----- please keep the speed in 800-1000 per minute, keep adding water to keep the drill cool, strictly prohibit from dry drilling.
SHOWview product -
-
Product Highlights
- Each tile hole saw with a removable diamond tipped drill bit - no special guiding tools needed
- The high-quality diamond drill bits with thicker diamond coating make the edge of the groove sharper, which can achieve smooth and high-precision cutting. large chip holes on the side can remove waste, ensuring smooth and accurate punching
- Specification: size: 20mm. suitable for cutting accurate holes on glass, ceramic, tile, porcelain, marble, stone bottles and pots. the spotting drill bit in the center helps for cutting accurate holes
- High-performance materials: the glass hole cutter is made of high-quality iron alloy, which is very sturdy. at the same time, the surface is nickel-plated, which has good rust resistance, corrosion resistance and prolonged service life
- Tips: please use at low drill speeds and drill pressure. always work with coolant (water) when drilling. not suitable for drilling tempered glass, plastic and wood.
SHOWview product
Coupon copied
