10 Best
Api Electric Water Heaters
-
-
-
-
Product Highlights
- This heater has a built-in dry run protection sensor to keep your aquarium safe (it shuts off when the water level is too low)
- This heater has 10 watts and is suitable for aquariums up to 12 liters (2.6 gallons). the ambient temperature of your aquarium must not be below 20°c
- The built-in thermostat keeps your aquarium at 25°c by measuring the water temperature and automatically turning on or off to maintain it (red light indicates that it is being heated)
- Thanks to its discreet size, you can easily hide this small heater in a location of your choice for best results at an angle
- Place this flexible heater anywhere in your tank thanks to the handy suction cups and adaptable design
SHOWview product -
Product Highlights
- Pid temperature control: aquarium heater is made of high temperature proof abs housing, which is robust and durable.pid temperature control algorithm, high thermal energy and low power consumption.
- External controller: submersible aquarium heater has an external controller and is equipped with a state of the art heating chip to precisely control the temperature of the aquarium.
- Ultra short bar body: submersible fish tank heater features an ultra short rod body, only 23cm long, with an external knob to adapt the temperature for more intuitive control.
- Note:this product is not a baby toy, please pay attention to avoid the baby accidental feeding or accidental injury, this product is a doll house indoor accessories toy model, not a real person to use.
- Intelligent inverter technology: using intelligent frequency conversion technology, the power size is freely adapted by the chip, always maintaining a constant temperature at the lowest power.
SHOWview product -
Product Highlights
- Heater lenght: 400mm. cable length: 1.4m
- Manufactured using high quality 304 specification stainless steel
- Precise & reliable temperature control - 16 - 32 degrees, ideal for tropical / freshwater.
- Suitable aquarium size: up to 500 litres.
- 2 x heavy duty suckers included. fitted with uk 3 pin plug. ac 220-240v 50hz
SHOWview product -
Product Highlights
- 【thicker exploson-proof quartz glass 】: using stable and reliable high-quality materials, 30% thicker than normal aquarium heaters, which is blast-proof. protective cover made of high temperature resistant material will not soften with high temperature, it can prevent your loved fish from scalding
- 【heating faster&power saving】: unlike others, we u-picks aquarium heater use quartz as heat transfer medium, which can conduct heat in less time, more power saving. temperature adjustment range is 20-34 ℃, greatly meeting the temperature needs of different ornamental fish. 100w heater is suitable for 20-200l aquariums. note: please make sure that the heater is completel...
- 【safety protection design】 : u-picks thermostatic aquarium heater adopts dual sensors for better protection, when the water temp is higher than the set temp, heater automatically stop heating. when the water temp is lower than the set temp, heater automatically start heating. stepwise heating, the temperature gradually rises, which can prevent the temperature from chang...
- 【dual led digitale display】: with dual digital display windows, you can clearly see the water temp and set temp at the same time even in the dark. it is convenience to observe the temp change, higher security. with others' heater, you may need to take out the heater when adjust the temperature, which is easy to burn yourself. however, ours' external temp controller allo...
- 【after-sales reply within 24 hours】: our heaters are sealed with plastic packaging（including controller and heating tube body part） to ensure that new products are provided to customers. if the anti-theft seals on the packaging are damaged, please contact us for a refund/replacement.
SHOWview product -
Product Highlights
- High quality materials: hygger fully submersible heater provide the most effective working for your fish tank. thickened quartz protective glass; bottom protective cover; stable suction cup; double seal; precision welding; no leakage of insulation.
- Product parameter: cord length: 5.9ft; voltage:220v ac 50hz; watts:50w, up to 56l tank; the temperature range is 20℃~34℃; can be used in various tanks, coral saltwater, and small betta freshwater tanks.
- Temp setting guideline: do: rotate left and right to adjust the temperature, easy to adjust, the range is 20℃~34℃. see: temperature scale setting guide bar. working indicator light, plug in the power, the working state is more intuitive.
- Working principle: the hygger thermostat heater stops when the surrounding water temperature reaches the set temp, and starts to work when the surrounding water temp is low, and it cycles over and over again to achieve equilibrium. it is not a traditional heater that has been heated all the time.
- Quality working: 2mm thick glass tube, heat conduction is more even, anti-collision, explosion-proof and corrosion-resistant, dual-purpose for betta freshwater and saltwater. the high-efficiency heating wires have a large area and are arranged tightly to increase the heating area and transfer the heat evenly.
SHOWview product -
Product Highlights
- Compact design – our heater is designed for high energy-efficiency and has built-in suction cups, allowing both vertical and horizontal placement in aquariums. its also applicable at low water levels and suitable for small aquariums and terrariums up to 10 litres.
- Reliable & safe – tigerlily enterprises is committed to your aquarium's safety. our heater features a built-in safety mechanism to prevent overheating or malfunction.
- Preset temperature – our mini aquarium heater automatically stops operating when the water temperature reaches 26oc, suitable for most tropical fish, shrimp and aquatic plants requiring stable conditions
- Heats water quickly & accurately – construction from a heat-resistant material, our heater has great efficiency and will heat your aquarium water quickly and accurately. with accuracy of plus or minus 1°c.
- Indicator light – the indicator light will turn ‘red’ when the heater is actively heating and ‘green’ when preset temperature has been reached.
SHOWview product
Coupon copied
