4 Best
Blacksmith Forges
-
Product Highlights- Upgrade design: the assembled firepot weighs about 40 pounds and uses with a clinker breaker, weighted ash dump, and air-inlet pipe. the ash dump/air pipe system is one piece and bolted to the firepot. disassembled firepot require a 9/16" socket/wrench to connect the ash dump and clinker breaker.
- Ash dump: 12" long, 3.5" square. it has two tabs on it for fixing two 3/8" bolts to the firepot. (bolts included) it has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker. the air inlet pipe is 3" round (outer diameter) and 4" long.
- Wide application: the firepot is one of the most important tools in a blacksmith's workshop. ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower.
- Firepot: inside dimensions are approximately 10" x 12" x 3.5". constructed entirely from 1/2" thick plasma cut plate steel, welded inside and out. the lip is 1/4-inch plate steel. ideal for forging where there are at least a 10.5" x 12.25" rectangular hole.
- Clinker breaker: constructed from a piece of 1/2" thick steel plate with a 1/2" round steel handle. it fits in a slot in the ash dump. the round hole in the bottom of the firepot is 3" in diameter and the clinker breaker is 2.5" in diameter, leaving a 1/4" slot around it to let air from the blower into the firepot.
SHOWview product -
Product Highlights
- Clinker breaker: the clinker breaker on a 1/2 inch rod has a turn-down end that works as a handle and is rotatable; it is used to simply remove waste ash dump and allow air to blow in the firepot. it perfectly fits into the ash dump's slot.
- Ash dump that is automatically adjustable: the bottom of this firepot is equipped with an ash dump. an automatic open-close function is included on the weighted ash dump. when waste ash dumps are produced, you don't have to manually open the weighted ash dump; it opens and shuts on its own.
- Firepot: the inside dimensions are around 10 "x 12" x 5". 100% 1/2 steel has been used to construct a "thick, both internally and externally welded plate steel which has been plasma cut. the ideal forging parameters include a rectangular hole that is at least 10.5" x 12.25" and up to 11.75" x 13.75".
- Air inlet pipe: the air inlet pipe, which is 3" round (od) and 4.5" long, allows air to enter the firepot from the attached hand crank blower, increasing the amount of oxygen that reaches the coal at the firepot's bottom and allowing the coal to burn completely to create the ideal forging temperature.
- Wide application: a blacksmith's workshop has several tools needed, but the firepot is one of the most essential. ideal for forging with the help of a hand crank blower hammers, punches, tongs, and other metalworking jobs.
SHOWview product -
Product Highlights
- 【portable & compact】this mini farrier forge is made of 1.5mm stainless steel sheet, highly resistant to corrosion. forge external dimension: 6” (h) x 6” (w) x 16” (l) (16cm x 16cm x 40cm) .forge internal dimension: 4” (h) x 4” (w) x 16” (l). interior fully lined with 1 inch of ceramic wool. weight: 10 lb (5.2 kg). weight: 10 lb (5.2 kg). height with refractory brick : 3...
- 【blacksmithing forge with double doors】we designed the durable door for the gas forge, it can help you to heat steel up quicker via closing the door, time-saving, propane - saving.
- 【wide application】lsmiitth propane knife forge - a perfect choice for smaller projects by its portable, lightweight and easy maneuverin. this propane forge kit is efficient tool for blacksmithing, farring and knife making. we combined this mini forge with powerful burners, which could reach welding temperature to 2600°f (approx. 1400℃). lots blacksmithing job can be don...
- 【adjustable gas regulator】adjustable high pressure propane regulator 0-6 bar (5/8" bsp male pol cylinder adapter), the male end (0.902" diameter thread) connects a standard size propane tank. with 150cm hose. suitable for these countries:united kingdom, ireland, south africa. you can control gas consumption by adjusting gas pressure, btu of single burner is around 100,0...
- 【100% satisfaction guarantee】you will receive 1 propane forge with ceramic fiber blanket, 1 refractory brick, 2 forge burners, 1 gas hose with regulator, 1 protective gloves, 1 tong, 1 igniter. your satisfaction is our priority. we strive to give our customers excellent service. any problem will be solved in shortest time!
SHOWview product -
Product Highlights
- Insulation: the interior of the forge is fully lined with 1” /25mm of ceramic blanket. the forge bottom is made of 20mm firebrick, providing superior strength and durability
- The forge body is made of: 21-gauge (0.8mm) steel. the gas pressure regulator with a gauge and mpa monometer. pressure range: 0-0.6mpa (0.1mpa - 1bar - 14.5psi)
- Interior dimensions (wxhxd): 5.6” x 5.6” x 10” (140mm x 140mm x 250mm). height with ceramic firebrick: 4” (100mm). weight: 10lb (5kg). temperature: 2500°f / 1370°c
- Fitting: g 5/8" uk pol lh is included for the united kingdom and ireland. we have 4 different gas pressure regulator connections. one of these gas pressure regulators will be included depending on the country. see below (w21,8 x 1/14'' lh, w20 x 1/14" lh, g 5/8" uk pol lh, pol cga-510)
- Package includes: gas propane forge model: dfs, 1 burner model dfp, firebrick, tongs, heat resistant gloves (glove appearance may vary), gas pressure regulator with manometer, 6.5ft / 2m gas hose, 2 clamps, refractory rigidizer powder, brush, user manual
SHOWview product
Coupon copied
