10 Best
Chlorine Pool Shocks
-
-
Product Highlights
- Perfect for pools experiencing algae or clarity problems
- Add once a fortnight or more frequently in hot weather
- Easy and fast acting, ideal for shock dosing or regular use.
- Good for shocking hot tubs, clear dirty or cloudy water from your spa
- Top quality branded product from castle hot tubs
SHOWview product -
Product Highlights
- Maintain free chlorine residuals routinely in the 1 - 3 mg/l (ppm) range. shock or oxidizing procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (10ppm) for a full shock truant
- Repeat dose/application if necessary to achieve the desired level
- Maintain ph levels within the ideal range of 7.2 - 7.6. if the level is not in this range, adjust accordingly
- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons 10 liters) of water. stir well to ensure product is fully dissolved. add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution
SHOWview product -
Product Highlights
- Granular shock chlorine is highly effective at removing algal infestations and adding the sparkle back to dull and hazy water. the product can also be used if the pool or hot tub has been neglected, if algae has grown on the pool or hot tub's floors and walls, or if there has been an unusually high bather load.
- Ph levels should be within the recommended range of 7.2-7.6 for optimal results. if the level does not fall within this range, make adjustments. keep free chlorine at the recommended levels: 1–3mg/l (ppm) for pools and 3-5mg/l (ppm) for hot tubs. shock or oxidising operations should be performed weekly or fortnightly, with a maximum of 10mg/l (ppm) for a complete shock ...
- Crystalclear ultimate granular shock chlorine is a highly concentrated chlorine (min 70% ci active) that is used to shock your swimming pool or hot tub water on a regular basis. this should be done every two weeks or more frequently during hot weather or if the water in your pool or hot tub turns green.
- It is highly recommended to dissolve the granules first in a large clean bucket of warm tap water first before adding to you pool or tub. this way you can see that the granules have dissolved fully, then simply add the bucket solution to your pool or hot tub. do not exceed more than 100g per 10 litres of warm bucket water. stir well to ensure complete dissolving of the ...
- Helps to prevent and remove algae and destroy swimmer waste. can be used for routine disinfecting.
SHOWview product -
Product Highlights
- Granular shock chlorine is a highly concentrated chlorine that is used to shock your swimming pool or hot tub water on a regular basis. this should be done every two weeks or more frequently during hot weather or if the water in your pool or hot tub turns green.
- Equivalent to shock xtra and rapid shock. helps to prevent and remove algae. destroys swimmer waste. it can be used for routine disinfecting. ph 11.5. part of the boast system.
- 1- keep ph levels within the optimal range of 7.2-7.6. if the level does not fall within this range, make adjustments. 2- keep free chlorine residuals in the 1–3mg/l (ppm) range. shock or oxidising operations should be performed weekly or fortnightly, with a maximum of 10mg/l (ppm) for a complete shock treatment.
- 4- repeat the dose/application as needed to obtain the target level.
- 6- after shock treatment, wait at least 30 minutes for the chlorine level to decrease below 5mg/l before bathing again. always test your water after dosage and before bathing.
- Blue horizons granular shock chlorine, a calcium hypochlorite granular shock chlorine, can be used to winterise your outdoor pool or hot tub.
SHOWview product -
Product Highlights
- Non chlorine shock is used as an oxidiser for hot tubs spas and swimming pools to help to clarify the water
- 5kg tub
- Ideal for the weekly non chlorine shock of your swimming pool or hot tub to keep your water clear and perfect
- Using shock will help improve water clarity and sanitise
SHOWview product -
Product Highlights
- Keep your water clear and perfect.
- Using shock will help improve water clarity and sanitise
- Ideal for the weekly non chlorine shock of your swimming pool or hot tub
- Non chlorine shock is used as an oxidiser for hot tubs spas and swimming pools to help to clarify the water
- 1kg tub
SHOWview product -
Coupon copied
