10 Best
Clamp Ammeters
-
-
Product Highlights
- [lowz & lpf] low input impedance(lowz) prevents false measurements caused by phantom voltage. low pass filter (lpf) for accurate measurement of frequency signals when measuring motors and transformers.
- [other features] 1. d-shape jaws that open to a maximum of 2.8cm. 2. backlit screen and torch for clear readings and ease of operation. 3. auto shut-off after 15 minutes of inactivity to conserve battery power. 4. low battery alert to remind battery replacement.
- [ac dc clamp meter] this clamp meter can accurately measure ac/dc current, ac/dc voltage, temperature (thermocouple included), ncv, capacitance, frequency, resistance, continuity and diode. good help for troubleshooting the household solar system, automotive and industrial electrical issues, perfect for electricians, diy, professionals, etc.
- [true-rms clamp meter] this multimeter can measure 400 a ac / dc current, 600 v ac / dc voltage.
- [service and safety] passed iec61010-1 and cat iii 600v certification. the screen turns orange to warn when the voltage >80v, the current >1a. comes with a nice carry case, manual and two sets of leads for electrical and temp. kaiweets provides 36 months of high-quality service and lifetime technical support.
SHOWview product -
Product Highlights
- ✅【data logging】smart electrical tester with built-in bluetooth module and customized software, available to connect with android / apple phones or tablet to remotely monitor and save & share measurement data. useful multimeter data logger for labs, factories and household in appliances troubleshoot or diy.
- ✅【easy-to-use】user-friendly deigns with relative value measure mode, true rms, over-range indication, max/min measure mode, 26mm jaw caliber, data hold to freeze & lock measurement value, led lamp light, back light lcd, auto power off, low battery indication and temp °c/°f switchable etc. a mini yet practical electrical tool for electricans, hvac tech and diyers etc.
- ✅【trms multimeter】built with current clamp sensor, this clamp multi tester can accurately measure dc voltage 0.1mv~600v, ac voltage (true rms) 1mv~600v, ac/dc current 10ma~400a, resistance 0.1ω~60mω, capacitance 6nf~60mf, frequency 9.999hz~9.999mhz, temperature -20°c~1000°c, duty cycle 0.1%～99.9%. true rms for accurate measurements on ac volt and amperage
- ✅【ncv detector】support non-contact ac voltage detection. just hold this volt tester close to the conductor, and then its lamp light will light up with sound if there’s live voltage ≥ 90v ac rms.clip on the ac line splitter or ac live wire to measure amp/current without peeling or breaking the cord. safety circuit / earth leakage checker to avoid some unnecessary electri...
- ✅【safety first & overload protection】qualified with iec-1010 concerning electronic measuring instruments with an over-voltage category 600v(cat ii) and pollution 2. overload protection covers ac/dc voltage current, resistance and resistance. comes with 12-months warranty and lifetime technical support :)
SHOWview product -
Product Highlights
- Ac/dc voltage testing -- voltage testing function for both ac and dc voltage. low battery power indicator function
- Data hold measuring function -- measuring instrument with function of data hold, easier to read data
- Troubleshoot problems -- designed to safely and accurately troubleshoot a variety of automotive and household electrical problems
- Overload protection function -- support testing function for on-off buzzers and diodes, overload protection function
- Quick check accurate results -- features large digital display for battery quick check and accurate results
SHOWview product -
Product Highlights
- - 36mm jaw opening: 36mm large jaw opening to measure without touching or interrupting the circuit.
- - 400a ac current measurement: 40a~400a±(2.5%+3) wide range measurement, suitable for various wires, convenient & accurate.
- - compact size: portable to carry and easy to use in one hand.
- - automatic range: intelligent efficient operation to get scientific accurate results.
- - ncv non-contact voltage detection: if you want to detect whether there is ac voltage or electromagnetic field in the space, you can get the front end of the clamp head of the meter close to the measured object. if there is, a beep will sound and the ncv light will flash.
SHOWview product -
Product Highlights
- ✅wide measurement range - 6000 counts testers can measure dc and ac current, voltage, resistance, capacitance, non-contact ac voltage (ncv), detection frequency, temperature, diodes, etc.
- ✅big clamp design - jaw opening measures current in a conductor up to 26mm without touching or interrupting the circuit. this design is easy to use, safe and portable.
- ✅true-rms clamp meter - this multimeter is characterized by accurate measurement of ac/dc current, ac/dc voltage, frequency, resistance, capacitance and also provides diode, continuity, duty-cycle and temperature tests.
- ✅app connect - ac/dc current meter with serial data output function.ac/dc current meter with serial data output function can be connected to cell phone via bluetooth to record, analyze and process real time data via cell phone app.
- ✅ncv detection function - non-contact voltage detection effectively check electrical status through measuring em field intensity without touching any wires; the ncv button lies on the right side. simply place your thumb on it and push.
SHOWview product -
-
Product Highlights
- Measuring range: 600a ac current, 600v ac/dc voltage, 60mω resistance, 60mf capacitance, 10hz~10mhz frequency, and -40~1000℃ temperature.
- 28mm jaw opening: jaw opening of 28mm to measure current without touching or interrupting the circuit.
- Power supply: powered by 2*1.5v aaa battery (not included), convenient to operate.
- Multifunctional clamp meter: can be used to measure ac current, ac/dc voltage, resistance, capacitance, relative value, max/min value, frequency/duty cycle, live test, continuity test, and diode test.
- Data hold: hold the measured data for conveniently checking or observing data. backlight function: 1.6-inch lcd screen with backlight on/off switchable for display data clearly.
- Accessories: comes with a pair of test probes for convenient measurement, and a black zipper pouch for storing the clamp meter.
SHOWview product -
Product Highlights
- ⚡【remote display via bluetooth】：scan the qr code and download the app first.the wireless bluetooth digital clamp multi-tester will auto connect with your smart phone in the ailink app(within 15m).which convenient for you to monitor,log and analyze the max/min/current of volt amp ohm in real time.
- ⚡【easy to operation】：the true-rms voltmeter ammeter with large backlight display,you can read and record the value easily in darkness.feature with data hold,low battery indication,auto range function.press “rel” will show the relative testing and zeroing the clamp tester to obtain more accurate measurement.
- ⚡【ac/dc clamp meter】: the highly sensitive ac dc volt amp clamp multimeter feature with trms 6000 counts auto-ranging, be able to accurately measure ac/dc voltage,ac/dc current to 1000a,resistance,capacitance,diode,temperature(℃/℉),hz,continuity buzzer test,etc.
- ⚡【safety & protection】：the amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. overload protection is up to standard of catⅱ1000v or catⅲ600v in all range.non-contact voltage(ncv) function can detect voltage without touching any wires and avoid electric shock .
- ⚡【accurate current meter】the ac dc current measurement（600a/1000a）has high resolution of up to 1a.when you test ac current,you must separate the live wire,otherwise the degree will always be zero.infurider provide 365-day quality guarantee and lifetime tech support.welcome to contact us if you have any question with the product.
SHOWview product -
-
Coupon copied
