10 Best
Clamp On Ammeters
-
-
Product Highlights
- ✅【data logging】smart electrical tester with built-in bluetooth module and customized software, available to connect with android / apple phones or tablet to remotely monitor and save & share measurement data. useful multimeter data logger for labs, factories and household in appliances troubleshoot or diy.
- ✅【easy-to-use】user-friendly deigns with relative value measure mode, true rms, over-range indication, max/min measure mode, 26mm jaw caliber, data hold to freeze & lock measurement value, led lamp light, back light lcd, auto power off, low battery indication and temp °c/°f switchable etc. a mini yet practical electrical tool for electricans, hvac tech and diyers etc.
- ✅【trms multimeter】built with current clamp sensor, this clamp multi tester can accurately measure dc voltage 0.1mv~600v, ac voltage (true rms) 1mv~600v, ac/dc current 10ma~400a, resistance 0.1ω~60mω, capacitance 6nf~60mf, frequency 9.999hz~9.999mhz, temperature -20°c~1000°c, duty cycle 0.1%～99.9%. true rms for accurate measurements on ac volt and amperage
- ✅【ncv detector】support non-contact ac voltage detection. just hold this volt tester close to the conductor, and then its lamp light will light up with sound if there’s live voltage ≥ 90v ac rms.clip on the ac line splitter or ac live wire to measure amp/current without peeling or breaking the cord. safety circuit / earth leakage checker to avoid some unnecessary electri...
- ✅【safety first & overload protection】qualified with iec-1010 concerning electronic measuring instruments with an over-voltage category 600v(cat ii) and pollution 2. overload protection covers ac/dc voltage current, resistance and resistance. comes with 12-months warranty and lifetime technical support :)
SHOWview product -
Product Highlights
- 💖【flexible clamp adaptor】 ke-605a current clamp adaptor is recommended to work with kethvoz digital multimeters ke-770k for easy current amps measurement. when use it with other brands multimeters, dial to mv range for ampere measurement, 1mv = 1a output.
- 💖【easy-to-use】clamp the amp probe around the live wire/one conductor only to get the accurate current reading, or use an “ac line splitter”. 1mv = 1a output & standard 3/4 inch banana plugs makes it compatible with most multi testers that features with 1mv sensitivity.
- 💖【45mm big open jaw meter】built with 45mm/1.77 inches large open jaw, easy to clamp on thick wire to measure high ampere ac/dc current up to 600 amps without breaking the electrical wires.
- 💖【accurate ampere measurement】±2.5% of measurement +5 digits accuracy for signal output conversion. the arrow on the jaw indicates the dc current direction of positive current flow ( from positive to negative)
- 💖【how to use】 connect the clamp adapter black plug to multimeter "com" socket and the red plug to the "μa ma" socket--->select “dc” or “ac” current measurement accordingly----->clamp on the wires and measure as user-manual guided. p.s. if there’s any remaining measurement displayed on the multimeter, press the “rel” button to get it clear before measurement.
SHOWview product -
-
Product Highlights
- ⚡【bluetooth voltmeter ammeter】yf-7200app clamp meter can be easily and automatically connected to your android/ios.convenient viewing of voltage amperage ohm readings on a smartphone or tablet via ailink app(within 15m).moreover, you can download files or charts to monitor,log and analyze.
- ⚡【ncv function】our clamp on multimeter with non contact voltage function,can detection effectively check electrical status through measuring without touching any wires.light and sound alarm if detects ac voltage 90-1000v or live wire.easy to use for troubleshooting your electrical and household problem.
- ⚡【true rms clamp meter】this ac dc clamp multimeter can accurately measure ac/dc voltage,ac/dc current(60a/400a) has resolution up to 0.01a.also can provide resistance,capacitance,temperature,diode,continuity,frequency(hz) and duty cycle measurement.
- ⚡【easy to use】press the [hold] button over 2 seconds to turn on lcd backlight screen and brightness flashlight.it’s possible to read and record the value easily in darkness.the volt amp meter feature with data hold,low battery indication.compact and portable design make the amperage meter easy to carry and use.
- ⚡【safety current clamp】this ammeter with overload protection in all range,safety measure ac dc current with the clamp,so you don’t have to strip any wires.you must separate the live wire and neutral conductors when you measure ac current,otherwise the degree will always be zero.infurider provide an 365-day worry-free warranty and efficient customer service.
SHOWview product -
-
Product Highlights
- It is an auto ranging dmm with ac current clamp meter function.
- The temperature can be measured by directly touching the thermocouple.
- This instrument performs ac/dc voltage, ac current, resistance, audible continuity, diode, temperature measurements and non-contact acv detect (ncv) as well as capacitance, hz etc.
- Accurate measurement, formally reflected.
- When measuring the current, the position of the measured fluid should be placed in the center of the clamp to avoid length error.
SHOWview product -
Product Highlights
- ✅【bluetooth amp meter】 this clamp meter can be connected with mobile phone by bluetooth, auto pair with android / ios phone via bluetooth nearby, it's easy to install, just scan the qr code or search “ailink” in google play or app store, so you can measure data and analyze it by mobile phone app. note: the mobile phone app can be installed in iphone 4s ios 7.0 or androi...
- ✅【easy to use and read】small and portable to carry and use(207*75*37mm) ; high resolution, large backlit lcd screen improves visibility. the auto backlight can access measurement in a dark place. low battery display to remind you replace the battery, widely used in your life.
- ✅【multifunction clamp meter】 6000 counts auto-range ac/dc amps clamp multimeter with the dc voltage range:600mv~600v, ac voltage range:6v~600v, ac/dc current: 60a~400a; resistance:600ω~60mω; ideal non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, hvac, vehicle boat motor diagnosis.
- ✅【ncv detection function】non-contact voltage detection effectively check electrical status through measuring em field intensity without touching any wires; the ncv button lies on the left side of the rotary switch. simply place your thumb on it and push; when the live voltage ≥ 90v ac rms, the lamp light will light up together with sound.
- ✅【safety guarantee】 safety standard iec 61010-1, cat iii 600v. double insulation. 48 months product warranty provided. 7/24 customer service. if you have any problems with our product, just contact us, and we will solve the problems for you asap.
SHOWview product -
Product Highlights
- 【excellent large lcd screen】allows 2 measurement parameters to be displayed at the same time, and the displayed number is 16mm high. 6000 counts clamp meter multimeter with lcd backlight and flashlight, can illuminate the measurement area, easy to read even in the dark. the design of the analog bar display makes the change trend of the measured signal value more intuitive.
- 【compact and portable】compared with conventional clamp voltage tester, rq-7200d ammeter clamp is smaller in size(the maximum opening of the clamp is 26mm), easy to hold, can be easily carried around in your pocket, and has low overall power consumption. it is an ideal tool for solving electrical problems in households, automobiles, hvac, machinery and other fields.
- 【high precision trms multimeter】rq-7200d auto ranging multi tester can accurately measure ac/dc current 60a~400a, ac/dc voltage 60mv~600v, resistance 600ω~60mω, capacitance 6nf~60mf, temperature -20℃~1000℃ (℃/℉ switchable), frequency. the amp clamp meter also supports diode detection, live wire discrimination and continuity test.
- 【multi-function】①ncv detection function can quickly help you detect the presence of voltage and give an audible and visual alarm; ②data retention to freeze data for later reference; ③15 minutes auto shutdown to save power. in addition, the little meter also has functions such as relative value measurement, overload protection, over-range display, low battery reminder an...
- 【quality assurance】the clamp multimeter tester has passed the iec-1010 double insulation, environmental pollution degree 2 degrees, and overvoltage category cat ⅱ 600v or cat ⅲ 300v safety standards promulgated by the international electrotechnical commission. waporich provides a 365-day after-sales guarantee service, allowing you to purchase worry-free.
SHOWview product -
-
Product Highlights
- ⚡[smart amps meter] download customized app for android/ ios phones on google play or app store, which allows you to real-time monitor live maximum/ minimum/ average value simultaneously, graphing your measured data, record, save and output serial measurements.
- ⚡[voltmeter for various purposes] combining multiple functions in one, bt-570s-app dmm is ideal for troubleshooting electric problem, household general purposes, automotive maintenance, hvac systems, mechanical repairs, car battery, etc.
- ⚡[wide range avometer] true-rms ac/ dc amps multitester can accurately measures dc volts 0.1mv~1000v; ac voltages 1mv~750v; dc & ac ampere 100ma~1000a; resistance 0.1~60mω; capacitor 1pf~60mf; frequency 0.001~9.999mhz; temp -4~1832℉ (℃/℉ optional), diode and continuity test.
- ⚡[safe ncv detector] 45mm large jaw design can easily clamp on thick wires and take amperage measurement without breaking into circuit. non-contact voltage detection checks volts status in simper and safer ways with visual and audible alarm.
- ⚡[humanize designed multitester] loads of small details you ever need in daily operation: data hold to freeze reading for later reference; backlight lcd screen ensures clear visibility in dim and dark conditions; rel to zero out reading before measuring. 12 months quality warranty and life-time technical support!
SHOWview product
Coupon copied
