10 Best
Consumer 3 D Printers
-
-
Product Highlights
- 【fast curing & strong stability 3d printer resin】apexmaker standard 3d resin has excellent fluidity, can greatly reduce the printing time, fast forming, non-fragile, to ensure the success rate of printing.
- 【widely used 3d printer resin】apexmaker 3d printer resin is suitable for most dlp/lcd 3d printers and supports 4k/8k printing. excellent fluidity significantly reduces curing time and ensures printing accuracy of ±0.1mm. please shake well before use, so that the functional components are fully mixed, otherwise it may cause uneven print color
- 【high precision & low shrinkage 3d printer resin】apexmaker photopolymeric resin prints models at low shrinkage during the photocuring process, and polyurethane acrylate (pua) is incorporated into the formula to ensure high precision and finish of the printed models.
- 【low odor & easy to clean 3d printer resin】apexmaker uv resin can be easily cleaned with isopropyl alcohol or ethanol, the surface finish is high, the smell is very light during 3d printing, and after printing, it only needs to be rinsed with alcohol, perfectly avoiding the sticky feeling of the printed model
- 【safe & reliable packaging】apexmaker 3d printer resin are packaged in leak-proof bottles, dedicated bubble bags and sturdy cartons to ensure safe transportation and storage. multiple packaging ensures that the 3d printer resin will not leak during transportation.
SHOWview product -
Product Highlights
- 【stable dimensional tolerance】minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, no deformation, easy handling, resulting in an outstanding surface finish and are highly precise.
- 【high compatibility】super tough pla filament is compatible with most of fdm 3d printers. widely used in mechanical models, structural parts and functional parts, such as industrial design, consumer electronics, auto parts, it manufacturing, mechanical and electrical fields.
- 【vacuumed sealed packaging】filament net weight: 1kg. esun filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3d printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- 【super tough pla】pla-st is an toughened version of ordinary pla. elongation at break is up to 90%, better toughness and bending resistance, not easy to break. 11 times stronger than pla at impact strength. suitable for printing mechanical parts with higher requirements for impact resistance and precision.
- 【tangle free & no plugging】full 1kg 3d printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. melt well, feed smoothly and constantly without clogging the nozzle or extruder, high printing successful rate.
- 【good printability】super tough pla keeps all the advantages of pla, easy to print. recommended extrusion / nozzle temperature 200-230℃, bed temperature 45-60°c. pla-st has general rigid, we recommend reducing printing speed when remote end printing to prevent poor feed.
SHOWview product -
-
Product Highlights
- It is named "bi-metal heatbreak" it has two components with different thermal conductivity. it is composed of 2 parts. we use a special process to hold them firmly together. you don't need to worry about it being damaged.
- The inner wall of the titanium is very smooth plus the dlc nano coating so that the filament can pass through very smoothly and stop clogging.
- This heatbreak is improved with special nano coating called dlc, dlc nano coating not only has excellent wear resistance, but also has a very low friction coefficient and excellent corrosion resistance, with a generally smooth surface,better for filament feeding
- This heatbtreak is made from two components, copper and titanium tc4. titanium tc4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
- Compatible with creality ender 3 / ender 3 pro/ender 3 v2 / ender 5 /ender 5 pro / ender 5 plus , cr10 / cr10 v2 / v3 /s4 /s5 / cr10s 3d printers and neptune 3 /3 pro /4 /4 pro 3d printer, (but not for cr10s pro, please know before ordering) .
SHOWview product -
Product Highlights
- 2.product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.plug and play on the ramps, but need to modify the firmware to support.
- 1.the mini12864 display panel has rgb multi-color backlight and can support 8 rgb, which is even more cool.
- 3.with a sd card base on back, put slicing file into the sd card and select the file on the lcd, then can be printing.
- 5.note: the same way as lcd12864, connect with exp1 and exp2 of the motherboard, and select backlight through the interface.
SHOWview product -
Product Highlights
- High-temperature carburizing and hard-forming thermoformed steel, good wear resistance and heat resistance.
- Nozzle caliber: 0.4 mm filament diameter: 1.75 mm material: hardened tool steel
- Compatibility: umlife 3d printer nozzles compatible with mk8 hotend for creality 3d printers, such as ender-2/ ender-3/ ender-3 pro/ ender-5, also compatible with creality cr-10 all-metal hotend, prusa i3, anet a8, reprap, etc.
- Hardened steel tool high temperature pointed wear resistant mk8 nozzles 0.4 mm/ 1.75 mm 3d printer compatible with makerbot, creality cr-10 all metal hotend, ender 3/ ender3 pro, prusa i3
- Mk8 extruder nozzles fit for 3d printer makerbot creality cr-10, ender-2/ ender-3/ ender-3 pro/ ender-5, anet a8, reprap, prusa i3, and so on. compatible with the most common 3d printer. fit exactly like the original.
SHOWview product -
Product Highlights
- Wide compatibility: it is suitable for most v-slot aluminium profiles of most diy 3d printers, including but not limited to , 3, anet etc.
- Wide range of applications: they are not only mainly used for 3d printers, but also for engravers, heat wire machines, holographic cutters, camera sliders, plasma cutters, robotics, furniture and other diy machinery
- Nice expressiveness: these 3d printer wheels move smoothly, low noise, have high printing accuracy, and can increase printing speed beautifully, they are useful accessories for 3d printers
- Reliable material: made of polycarbonate, its good wear resistance, flame resistance and oxidation resistance can help your 3d printer do its job well
SHOWview product -
-
Product Highlights
- High-quality stainless steel, overall heat treatment, high hardness, good elasticity, strong and durable.
- Non-toxic and harmless, one-shot injection molding as a whole, durable
- The blade is incisive, and the edges are rounded to protect the stickers and the hot bed.
- The handle is made of tpr soft rubber, which is ergonomic and comfortable.
- Professional designed, strict processing, perfect match with the 3d printer.
SHOWview product -
Coupon copied
