10 Best
Countersink Cutters
-
Product Highlights- 90 degree drilling angle design, high bevel circlip and fine chamfering
- Use with milling, drilling, planing and chamfering machine
- Made of high quality hss 6542 steel, high hardness, wear-resistant and durable
- Great for hardened and tempered steel, soft and hard woods, mild steel, iron and stainless steel etc
- Suitable for all common drills from hilti, bosch, makita, hitachi, fein, aeg, metabo, dewalt, black & decker, brüder mannesmann, kress, wolfcraft, einhell, milwaukee, flex and many more
SHOWview product -
Product Highlights
- 8pcs standard wood plug cutter set includes 4 standard plug cutters and 4 four-tooth chamfered cutters.1/4’(wood plug 6mm),3/8’(wood plug 10mm),1/2’(wood plug 13mm),5/8’(wood plug 16mm).
- Through quenching treatment, the hardness is improved, and sufficient torque is guaranteed to be stable and not slippery.
- 6pcs countersink set drill bits for drilling holes with screw sizes 5#, 6#, 8#, 10# and 12#.
- Countersink drill set are easy to use and adjustable for length with hex wrench.
- Perfect for doing home improvement, diy and general engineering use.works with most types of hand drills. including but not limited to electric hand drill,lithium electric drill,pillar drill.
SHOWview product -
Product Highlights
- ★note: please allow slight error due to manual measurement. thanks for your understanding.monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. please take the real one as standard
- ★high working performance: great for chamfering, deburring and countersinking. three flutes design provides small chip loads and quicker removal. they can discharge chip more rapidly and smoothly in the process of using
- ★unique design: special designed steel counter sleeve countersinks or counter bores pilot hole. the countersink bore set is suitable for board of low hardness(less than 25°) such as aluminum, wood, plastic and other soft material
- ★rich & varied drill bit kit: this is 6pcs drill bit set, there are total six pieces of countersinks in sizes of 6.3mm, 8.3mm, 10.4mm, 12.4mm, 16.5mm, 20.5mm. these drill bit is made from hss, it is higher hardness than ordinary drill bit, more wear-resistant
- ★cost-effective & time-saving: this high speed steel drill bit with precision manufacturing, offer high cost performance, can reduce the labor strength of workers, speed up construction and reduce construction costs
SHOWview product -
Product Highlights
- 7pcs three pointed woodworking countersink drill bits:made of high speed steel with good abrasion resistance and durable,includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm for drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust. coated by titanium, the chamfer cutter kit is rust proof and has a long service l...
- Package contains 23 pieces woodworking drilling tool: 6pcs 1/4" hex 5 flute 90 degree countersink,7pcs three pointed countersink drill bit with l-wrench, 8pcs 3/8" shank wood plug cutter drill bit und 1 piece of automatic centering punch.
- 6pcs 1/4" hex 5 flute 90 degree countersink drill bits:made of high speed steels and with 6 different diameter sizes 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"),all have a 90°angle on the point for sharp and precise countersinking. the cutting edge is hardened and honed for sharpness.a chatter-free,five-flute designed with staggered cutting teet...
- 8pcs 3/8" shank wood plug cutter drill bit: made of durable carbon steel material,used for tapered 1/4", 3/8", 1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length.suitable for drilling of thinner stainless steel, carbon steel, aluminium plate, iron plate and other materials.
- Customer service: we strive for excellence and therefore our professional customer service ensures your satisfaction. our product is backed by our manufacturer with quality assurance guarantee.
SHOWview product -
Product Highlights
- 7 piece hinge hole diameter sizes include：3mm,4mm,5mm,6mm,7mm,8mm,10mm.8 piece corkscrew diameter sizes include:1/4 inch(6mm), 3/8 inch(10mm), 1/2 inch(13mm), 5/8 inch(16mm).
- 7pcs woodworking countersink drill bits set made of high quality carbon steel with titanium coated, drilling length can be adjusted for various length screws,chamfer is 5 flutes that can discharge the wood more rapid in the process of using.
- Package included 15pcs woodworking chamfer drilling tool, 7pcs three pointed high speed steel countersink drill bit with one l-wrench , 8pcs wood plug cutters drill bit set for wood drilling or woodworking chamfer
- 8pcs wood plug cutter tool drill bits includes 4 standard plug cutters and 4 four-tooth chamfered cutters,can be used with bench drill, hand drill or other professional bench drilling machine. to avoid slipping or eccentricity during drilling, we recommend to use bench drill, or fix the drill.
- 100% brand new and high quality,fine workmanship and perfect style.
SHOWview product -
Product Highlights
- 7pcs three pointed countersink drill bits made of high quality carbon steel with good abrasion resistance and durable,includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm(0.12", 0.16",0.2", 0.24",0.28",0.31",0.39") for drilling pilot holes, the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust.
- Package includes: total is 23pcs woodworking chamfer drilling tool. 4x straight drill bit cutter. 4x tapered claw drill bit cutter. 6x 1/4" hex countersink drill bit. 7x 3/8" round shank countersink drill bit 1x l wrench. 1x automatic center punch.
- 6pcs 1/4″ hex 5 flute 90 degree countersink drill bit are made of standard high speed steel. with high frequency quenching for heat treatment, the hss countersink bits have high toughness and hardness. coated by titanium, the chamfer cutter kit is rust proof and has a long service life.
- 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4", 3/8", 1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes.can be used with bench drill, hand drill or other professional bench drilling machine. to avoid slipping or eccentricity during drilling, we recommend to use bench drill, or fix the drill.
- Ideal for wooden planks, fiberboard, particle board, plywood, plastic, aluminum alloy board ,pcb board and more.we provide different wood plug drill bits. you can use in any holes your need. note: for your safety, please don't use it too many fast when you use it. please check whether it is suitable for your machine before use.
SHOWview product -
Product Highlights
- Use the plug cutter to produce an accurate plug which fits into that hole
- Countersink bit sizes: 6mm 8mm 10mm 12mm
- Use the countersink bits to cut a hole with a countersunk bottom
- Easy concealed screwing allows you to deliver a professional finish
- Plug cutter sizes: 6mm 8mm 10mm 12mm - supplied in an aluminium case
SHOWview product -
Product Highlights
- 🔩【drill design】the standard 1/4 inch hex handle can be quickly change, and the depth of the secondary sleeve can be adjusted by an allen key for grub screw heads or deeper covers to cover the matching plug
- 🔩【excellent using effect】eject wood chips faster, you can get a smooth surface on any type of hard, soft wood or aluminum
- 🔩【premium material】the drill bit is made of heat-treated and tempered titanium alloy-coated high-speed steel, which has excellent cutting force and durability, and its accuracy is higher than that of ordinary drill bits
- 🔩【main functions】the countersunk bit has an automatic starting point, and the five-slot design eliminates chatter and vibration, and makes the operation smooth, thereby achieving clean, accurate and burr-free cutting
- 🔩【applications】suitable for work pieces with hardness below 25hrc, such as carbon steel, thin iron plate, insulating plate, pvc plate, wood board,etc
SHOWview product -
Product Highlights
- The countersink drill bits set with titanium coating are very sharp, with a high circular machining accuracy and durability.
- The drill bits of standard sizes are compatible with all kinds of common drill and drilling machine, including vertical drilling machine.
- The set of 6 3-flute 90 degrees countersink drill bits is suitable for processing metal and some non-metallic materials, such as carbon steel, steel, thin iron plate, insulation board, pvc board, aluminum, soft and hard wood, plastic and so on.
- The high-quality countersink drill bits can remove burrs well without leaving scratches.
- Specifications: diameter of the countersink top: 20.5mm,16.5mm,12.4mm,10.4mm,8.3mm,6.3mm; diameter of the bottom:10mm,10mm,8mm,6mm,6mm,5mm; length overall: 47mm,47mm,46mm,39mm,40mm,37mm; material-high speed steel 4241
SHOWview product -
Coupon copied
