10 Best
Dremel Metal Engraving Bits
-
Product Highlights- The engraving point is ideal to use on hard materials such as glass and stainless steel
- Suitable for use with dremel 290 engraver which is a specialty engraving pen tool featuring reciprocating action for optimal engraving control
- This dremel (9929) diamond engraving point is a specially designed diamond-reinforced engraving bit for dremel engraver 290
- Reinforced with diamond partciles for a use on hard matierals and extra durability
- Included: 1x diamond engraving point
SHOWview product -
Product Highlights
- Kit includes a reusable storage case and a variety of accessories to allow you to carve, etch and engrave in a variety of materials including steel, wood, plastic, glass, stone, ceramic, and more.
- Sharpening/grinding accessories: 83142 9/32" silicon carbide grinding stone (x1), 83322 - 1/8" silicon carbide grinding stone (x1), 83702 1/8" silicon carbide grinding stone (x1), 84922 3/16" silicon carbide grinding stone (x1), 85602 13/32" silicon carbide grinding stone (x1)
- Turn your dremel rotary tool into a versatile carving machine with the 11-piece carving & engraving micro accessory kit.
- Carving/engraving accessories: 105 1/32" engraving bit (x1), 106 1/16" engraving bit (x1), 107 3/32" engraving bit (x1), 108 - 1/32" engraving bit (x1), 7103 5/64" diamond wheel point (x1), 7134 5/64" diamond wheel point (x1)
- Usa-based customer service: available by chat, email, phone or visit us at our service center in racine, wi.
SHOWview product -
-
Product Highlights
- 2x longer lifetime: dremel's 9901dm max accessory has a 2x longer lasting lifetime compared to dremel's standard, non-coated carving bits
- Versatile: ideal for carving and engraving in hardened steel, stainless steel, cast iron, nonferrous metal, fired ceramic, plastic, wood and other hard materials
- Dremel max: dremel's max life accessories provide long-lasting high performance and durability
- Titanium coating: coated with a layer of titanium nitride at the tip for improved resistance to wear
- Fits with all dremel multi-/rotary tools or other 3,2mm shank size multi- / rotary tools
SHOWview product -
Product Highlights
- Perfect performance - it can process various metals and non-metals, and the processing hardness can reach hrc70. it has a long service life, ten times more durable than high-speed steel tools, and more than 200 times more durable than small grinding wheels.
- Tungsten steel solid carbide material - it is not only simple and convenient to use, but also safe and reliable. the product has good processing quality and high smoothness. it can process high-precision mold cavities of various shapes.
- Main application - finishing various metal mold cavities, such as processing shoe mold machinery, aviation, automobile, shipbuilding, chemical industry, craftsmanship, and other industries, and the effect is remarkable.
- High production efficiency - it is dozens of times higher than the processing efficiency of files, and nearly ten times higher than the processing efficiency of small grinding wheels with handles. the handle can be used to replace the small grinding wheel in most work, without dust pollution.
- Tungsten steel grinding head - mainly used for pneumatic or electric tools. the speed is generally 6000-50000 rpm. when using tool holders and fixtures, the best cutting method is upside-down milling to avoid reciprocating cutting and prevent chips from flying away during work.
SHOWview product -
Product Highlights
- The single edge carbide rotary burr burr is easy to handle when working with soft materials such as wood, aluminium or plastic, this tool provides efficient and precise carving and polishing results. its single-edged design makes the rotary file more stable during the cutting process, reducing damage to the material while ensuring a smooth finish.
- Tungsten carbide rotary burr files are an exceptional material, highly acclaimed for its outstanding high hardness and strength as well as excellent durability. the service life is a full 8 times longer than that of traditional hss tools, an advantage that makes it widely applicable in industrial production and processing. this rotary file set is undoubtedly an indispen...
- Tungsten carbide rotary burr sets come in a variety of shapes and sizes. shapes include spherical, conical, flame, tree and cylindrical. overall length: 38-50 mm. cutting head diameter 3mm~6mm, shank diameter (3mm) 1/8'', length 23mm~35mm.
- Carving bitsl bits during use, please be aware that these rotary cutters operating at high temperatures may overheat and damage the material. for safety reasons, it is recommended that they be used in a well-ventilated environment with the proper amount of water or coolant to avoid overheating.
- Contact information:your account→your orders→sold by：mizhiaheng→ask a question. if you have any questions, please feel free to contact us.
- With its unique design and outstanding performance, the carbide rotary burr set demonstrates excellent advantages in machining a wide range of materials. the kit is specially equipped with two cutting tooth designs, which enable it to adapt to different materials and machining needs, providing more accurate and efficient machining results. it can not only achieve fine e...
SHOWview product -
Product Highlights
- The diamond-covered bits are ideal for fine precision engraving, carving, grinding and etching in glass, metal, plastic, rubber, ceramic, porcelain, leather and more
- Recommended maximum speed: rpm of 25000
- These points are covered with diamond particles for durability and strength making them ideal for use on hard materials
- With these multi purpose accessories your rotary tool functions as engraver pen and detail grinder
- Fits with all dremel multi-/rotary tools or other 3,2mm shank size multi- / rotary tools
SHOWview product -
Product Highlights
- 【double cut design】: the groove lines of these carving bits’ head are crossed, which makes it more suitable for materials with relatively low density, such as wooden, plastic and aluminum. to maximize cutting and material removal efficiency and effectiveness.
- 【wide range adaptability】: 1/8” shank carbide rotary file fits dremel and most die grinders or rotary tools. an ideal choice for metal working, tool making, diy woodworking, wood carving, model engineering ,groove processing, engraving, polishing, touch-up and smooth finishing.
- 【carbide burr set】: these carving bits are made from tungsten carbide steel for long life, sturdy and durable. shank diameter: 1/8'' , total length:45-50mm, cutting diameter: 1/4''. 1/8'' shank fits most small rotary tools with three jaw chuck.
- 【premium material】: this carbide burr set/rotary bit set is made of premium tungsten carbide steel which has long working life, it has extremely high hardness and good toughness, machining hardness reach to hrc70. the carbide burr set cut through extraneous material like a hot knife through butter.
- 【you will get】: 10 pcs tungsten steel rotary burrs set packaged into a small case for safety storage and protection. any problems, please feel free to contact us. we are happy to make full refund or send replacement and sincere apologies. many thanks for your support!
SHOWview product -
Product Highlights
- Wide range of uses - rotary burr set 1/8’’ shank fits most rotary tools. compatible with dremel, proxxon, mister tool, einhell or most rotary tools. widely used for wood, iron, carbon steel, alloy steel, stainless steel, copper, aluminum, and other metals, and marble, jade, bone etc.
- High work effenciency - carbide burr set recommended speed: 6000-60000rpm, max rotation speed: 120000 rpm(head dia. 3mm), 60000 rpm(head dia. 6mm), direction of rotation: right hand/clockwise, burrs are used counter-rotationally or with a swinging motion. pass the tool rapidly over the workpiece in the direction of rotation to achieve fine finishes or very smooth chamfers.
- Premium material - die rinder bits are made of heat-treated tungsten carbide which is extremely hard, tough, durable, heatproof and anti-corrosion. the premium material carbide burr set adopt special double cut design, improve the working efficiency greatly.
- Various sizes and shapes - tungsten carbide burr set come in various shapes and sizes. shapes include end cut cylindrical, ball nosed cylindrical, ball, oval, ball nosed tree, tree, flame, ball nosed cone, cone, inverted cone. total length: 38-50mm. cutting diameter 1/8'' & 1/4”(3mm & 6mm), shank diameter 1/8''(3mm), shank length 23mm & 35mm.
- Multifunctional - the tungsten steel grinding head can be used for diy, carving, engraving, and polishing, chamfering, grooving, reaming, hollow, beveling cutting, jewelry making, casting, grinding etc. can be used for woodworking and milling soft wood, plastic and other soft materials.
SHOWview product -
Product Highlights
- High work effenciency - double cutting head design, faster cutting time, better polishing effect, greatly improved efficiency and smooth surface after cutting. ideal choice for your diy woodworking, carving, engraving and polishing, chamfering, grooving, reaming, hollowing, bevelling.
- Carbide burr set - 10pcs carbide burrs in an exquisite plastic storage case. the working life is 10 times longer than high-speed steel and more than 200 times longer than small grinding wheels. they are easy to use, safe and reliable.
- Premium material - die grinder bits are made of high quality carbide for robustness and durability. they can cut wood and all kinds of metal (iron, carbon steel, alloy steel, stainless steel, copper, aluminium, etc) and non-metal (marble, jade, bone).
- Universal shank size - rotary burr set with 1/8" (3mm) universal shank and 1/4" (6mm) cutting diameter, fit for most rotary tools and die grinders. compatible with dremel, goxawee, ryobi, proxxon, milwaukee, apexforge, workpro, spta, teccpo, wen, vastar.
- 100% satisfaction - if you have any questions, please do not hesitate to contact us. fotybei service team will provide you 100% satisfactory solution within 24 hours. you do not need to worry about returns and refunds.
SHOWview product
Coupon copied
