7 Best

Electric Brake Kits

of May 2024

  1. Product Highlights
    • 【safe, durable & easy using】-ukca, ce, en15194 approved, ensures safety and quality. motor power cut-off function of the brake levers prevent the motor from overheating and saving energy. smoother bearing & 30mm magnet steel used in the hub motor, controller built-in design, make our ebike kit easier in install and can ride further.
    • 【road-legal ebike conversion kit】-restricted to 250w and 15mph (25km/h) speed by default as a road-legal electric bike conversion kit, but you could also switch into 1500w full power output for off-road mode by simply disconnect the blue cable, would brings 34mph (55km/h) speed.
    • 【integrated controller design】 install easier, just connect the parts to the hub motor, then power on the system, and ride!
    • 【powerful 1500w brushless motor】-the 48v 1500w ebike rear wheel conversion kit features a powerful brushless gearless hub motor. it runs efficiently and quietly. the max speed can reach 34mph (55km/h). it universal fits any 26in bike frame with 5.31in/135mm rear dropout spacing.
    • 【lcd display riding information】-shows all riding info front of you: riding speed, battery power, pas level, etc. the twist throttle ensures speed control is fast and simple. the aluminum alloy double wall rim is durable and stable, it can hold up to 330lbs/150kg.
    • 【pedal assist system】the pas function of this e bike conversion kit allows you to switch 3 riding modes between throttle / pas / manual. the suitable riding mode can be switched as needed. less fatigue and more comfortably, great for long trips. equipped detailed assembly instruction and video,7 x 24h customer service, help you complete the assembly easily.
  2. Product Highlights
    • 【braking performance and durability 100%】hydraulic brake disc thickened design: thickness 2.3mm (normal disc 1.8mm) brake pads thickened and enlarged design: friction area: length 34.7mm, width 20mm, thickness 3mm (normal length 26mm, width 15mm, thickness 1.9mm), providing stronger braking effect and longer durability for your ride.
    • 【manufacturing material】cnc manufacturing process , three fingers iron handle, closed system . caliper: cnc aluminum caliper (dual piston: use non-corrosive mineral brake fluid) brake disc: high manganese 410 stainless steel. fuel line: nylon + preparation yarn + pbt inner tube.
    • 【important note】front and rear brake hoses are 2300mm (90.5in) long and can be cut to the length you need (please watch the video and installation instructions)., the hoses are pre-filled with environmentally friendly mineral oil, no need to bleed to use;the front and rear caliper hose and control lever are separated for easy internal routing.
    • 【kit includes】ebike hydraulic brakes (two 2300mm/90.5inch tubes, one set of brake levers, one set of brakes, two 2.3mm thick, 180mm diameter brake discs)three mounting adapters and two sets of mounting screws, a pipe cutter and auxiliary accessories.
    • 【electric induction control system】use detachable power-off sensor, the sensor receives a signal when braking and cuts off the power output of the motor to ensure safe riding, the cable length is 300mm (11.8in), use 2-pin waterproof connector. 【hint】check the wiring port is matched.
Coupon copied
Opening Product name Amazon page In 05 seconds Cancel
Get exclusive articles, recommendations, shopping tips, and sales alerts
Sign up for our newsletter to receive weekly recommendations about seasonal and trendy products
Coupon copied to clipboard
We use cookies to enhance the security, performance, functionality and for analytical and promotional activities. We use cookies to personalize ads for you. By continuing to browse this site you're agreeing to our Privacy Policy. Got It
You're currently offline