10 Best
Flash Mount For Cameras
-
Product Highlights- Convenient to attach your gopro camera to your dslr.
- Connect the bottom part of this tripod to the camera shoe, the top part is available for gopro. (not compatible with cold shoe)
- Fully compatible with all versions of gopro cameras.
- Full-aluminum design for durable use.
- Includes: 1 x aluminium base mount; 1 x plastic clamping screw.
SHOWview product -
-
Product Highlights
- 【durable 11-inch magic arm】the magic arm has a 1/4" standard screw at one end, which can be installed on products with 1/4" thread such as super clamp. there is a hot shoe base on the other end of the magic arm, which can install camera, flash, monitor etc. 360° ball head design can adjust any angle according to your needs. （★please tighten the locking knob to fix the b...
- 【easy to use】the super clamp can be used with the magic arm, which can achieve more uses. they're great for taking photos and creating videos. their maximum weight capacity is about 800g.
- 【high quality material】the magic arm and super clamp are made of high quality aluminum alloy, which are strong, durable and not easy to corrode. the clamp has non-slip rubber pads to protect the bars etc from scratches and keep the clamp secure.
- 【powerful super clamp】the super clamp with 1/4" and 3/8" threads can attach more accessories such as the magic arm and ball head. it can open maximum 5.5cm and can be installed on table, light stand, bracket, tube, bicycle, motorcycle, etc.
- 【value pack】1 x11-inch magic arm, 1 x super clamp. if you have any questions about our products, please contact us immediately, we will do our best to provide you with a satisfactory solution.
SHOWview product -
Product Highlights
- 【solid construction】 made of robust black anodized aluminum alloy, these adapters are corrosion-resistant, built-to-last, yet lightweight—giving you a reliable mounting solution without adding any bulk or weight
- 【adjustable bracket】 cold shoe stand mounts can open to 20mm with the help of the locking knob and fasten a speedlite with extraordinary clamping strength. the 1/4” female thread at the bottom can attach to any standard light stand
- 【wide compatibility】 this 8-piece set comes with four 1/4” male–cold shoe adapters for dslr & mirrorless cameras, compact led lights, microphones, monitors, and four cold shoe stand mounts with 1/4” female thread for most speedlites and light stands
- 【simple installation】 screw the adapter into any device with the 1/4” thread or secure it on the camera’s cold shoe bracket with the knurled thumbscrews. no tools are required
- 【package contents】 4 × cold shoe mount adapter, 4 × cold shoe flash stand adapter
SHOWview product -
-
Product Highlights
- Flash hot shoe mount with 1/4"-20 tripod screw adapter.
- Easy to use.
- Easily attach dslr accessories to camera hot shoe mount or cold shoe mount. tax included.
- To mount your microphone, led light, monitor to dslr, camcorder or digital camera, or adapt anything else that has a 1/4-20 receptacle.
- Material : aluminum alloy.
SHOWview product -
Product Highlights
- ☛ dual cold shoe mount- 1x integrated cold shoe mount; 1x length adjustable cold shoe mount. adjustable range: 3-3.5”. international standard cold shoe mount compatible.ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,
- ☛ hot shoe mount attach base- comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.and attach the extension bar mount to dslr camera via its hot shoe base.
- ☛ universal lengthen hot shoe extension bracket- works as an extension bar mount to attach two rigs at the same time. it attaches led lights, microphones, monitors, flash, strobe etc, to your dslr camera,dv, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket.
- ☛ standard 1/4” tripod screws- three 1/4” threaded holes for tripod, light stand, handle grip and other support. can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole.
- ☛ durable and solid & durable- made of whole aluminum alloy. black anodized for higher durability. total length:8”, net weight:3oz
SHOWview product -
Product Highlights
- Cold shoe flash bracket- universal cold shoe mount on top for most dslr camera canon, nikon and other flashes with standard shoe mount or video led light, studio light. (note:this adapter does not fit sony and minolta flash)
- Light stand bracket- comes with a 1/4 inch to 3/8 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand.
- Light stand bracket, cold shoe mount with umbrella holder.
- Umbrella mount bracket- a hole design for mounting urbrella. 180° swivel joint allow vertical adjustment of the umbrella and flash light.
- Material: solid metal body,abs knob.
SHOWview product -
Product Highlights
- The straight flash bracket is with dual 1/4" screws to support two cameras,flash units or mics at the same time.
- Adjustable range: from 3.7 to 9.3 inches.long enough to hold two led light at the same time. (please check the max adjustable range for your camera or accessories before order).
- Dual camera mount with 1/4" standard screw hole to mount on tripod.
- Dimensions: 10.6 x 1.2 x 0.2 inches (lxwxh), max loading capacity: 6.6lb (3kg).
- This dual camera flash mount tripod bracket is made of all metal aluminum, affixed with non-slip rubber pads to protect your camera flash and mics from scratches and anti-slide.
SHOWview product -
Product Highlights
- 1/4’’ and 3/8’’ thread: dual camera mount for tripod comes with 1/4’’ and 3/8’’ thread holes at the center for tripod, light stand, handle grip, quick release plate and other support.please confirm whether the screw hole model is applicable before purchasing.
- No-slip rubber pad: dual hot shoe mount 1/4’’ screw with anti-slip rubber pad. can protect your camera flash and led light from scratches and slipping.note: the non-slip gasket can be removed according to the needs of the equipment.note: the non-slip gasket can be used according to the needs of the equipment and can be removed. the screws will get longer after removal.
- 2 pack dual flash bracket: package contains two flash brackets with 1/4 standard screw, which can be installed in mount on dslr camera, led light, flash light and more. perfect for your different demand on shooting.
- Adjustable flash extension bar: adjustable range from 4-18cm. allowing to attach two devices at the same time. please check the max adjustable range for your camera or accessories before order.
- High quality: made of high-quality aluminum alloy, very strong and durable. size: 20.3cm*2.8cm*0.5cm. weight: 72g. the perfect size makes it excellent portability, you can carry it with you in any situation.
SHOWview product
Coupon copied
