7 Best
Gas Powered Post Hole Diggers
-
Product Highlights- Large fuel capacity: the large fuel tank (1200ml) can avoid frequent refueling and can improve your work efficiency. the diaphragm carburetor can make gasoline fully burned to avoid gasoline waste and save you lots of money. translucent gas tank allows you to easily see when fuel needs to be added.
- Strong and durable: this excavator is made of high-quality iron, which can resist wear, corrosion, heat, and deformation. it has high strength, high hardness, and good sealing, which can ensure the hole digger works stably with low noise.
- High efficiency: the high power hole digger of 2.2kw, fast rotation speed (8800±300rpm), a drill bit with single blade and high hardness, and a two-stroke engine with stable operation can make your digging work easier to save you lots of time. the 31.6 inch drill bit makes you dig deeper and it is long enough to make you save more effort without bending too down. it is ...
- Flexible movement: this earth auger borer set is equipped with a rubber wheel with non-slip patterns and strong load-bearing capacity, allowing you to flexibly move this product with a good anti-slip effect. the ergonomic handles can reduce the fatigue of your hands and arms to provide you with a pleasant experience.
- Convenient to operate: this gas post hole digger has a simple hand-pull starter that makes it easy to start the machine by simply pulling it back. then you just need to hold the two handles and push down to achieve digging, even one person can operate it easily. it can be equipped with drill bits from 60-300mm in diameter, so you can install different sizes of drill bit...
SHOWview product -
Product Highlights
- ➤main parameter - engine: single cylinder, 2-stroke, air-cooled; cylinder capacity : 52cc; fuel mix: 25/1; bits : 4", 6" and 8"; bit length: 31"; safety: bit lock; power: 1.9w / 7500rpm; rotational speed: 8500rpm; horsepower: 2.4 ps; weight : 22.82lbs (without bit).
- ➤accessories included - 3 bits: 4", 6" and 8", extension bar: 12", fuel mixing bottle, toolkit for assembly.
- ➤widely application - post hole digger gives you plenty of power to efficiently dig and bore through holes for decks, fence posts, tree planting and more
- ➤handle and throttle - easy-to-grip finger throttle and switch control on handlebar for enhanced user power and speed control at your fingertips.
- ➤available size bit - our selection of bits are available in a variety of sizes and types from 4 in., 6 in., 8 in., 10 in., and 12 in. to meet job requirements
SHOWview product -
Product Highlights
- 【convenient to use&four-handle design】: it is designed with a manual recoil to start an easy fuel delivery system for quick start action, making it more convenient for you to use. and it has a built-in translucent fuel tank that allows you to easily track the proper fuel level. it adopts an upgraded four-handle design, allowing 1-2 people to easily handle various drilli...
- 【low noise】: it adopts an enlarged gearbox, which can work stably and with low noise, reducing noise troubles for your trenching work.
- 【high efficiency&good heat dissipation】: it has a maximum power of up to 2.2kw/3hp with a speed up to 7,500 rpm which can provide you with strong power and make your trenching work easier. the post hole digger has large cooling holes to ensure continuous work without stalling while extending its service life.
- 【fuel-saving and money-saving】: it adopts a fine technology carburetor, which can make gasoline fully burned when running, avoiding gasoline waste and saving money for you.
- 【durable material】: it consists of an aluminum alloy and pp post-hole digger and a steel bit that is strong and durable and does its job well.
SHOWview product -
Product Highlights
- High efficiency - with strong power (1900w), it has high speed (6500rpm), impact frequency (1500times/min), and impact energy (20-55j), which can provide this tree digger with powerful strength and make your excavation work easier.
- Energy & money-saving - this tree digger is equipped with a diaphragm carburetor that can fully burn gasoline, consuming less than 0.6l of fuel per hour, so it can save you costs and bring you more convenience.
- Multi-functional - this digger is equipped with three kinds of heads: wide shovel, pointed pickaxe, and flat pickaxe, which can not only dig trees and cut roots, but also carry out operations such as land trenching, and tamping.
- User-friendly design - two ergonomic handles wrapped with anti-slip rubber give you a comfortable grip without slipping, absorb shock and reduce hand fatigue even in long-term use for better balance and excellent drilling performance.
- Widely applicable - this tree digger is widely used in gardens, such as tree ball lifting and tree root cutting. it is suitable for a series of piling projects such as highway guardrails, farm fences, forestry seedlings, vineyard supports, vegetable planting, orchard supports, and fence protection.
SHOWview product -
Product Highlights
- ⚙️【sturdy and durable】: different from the side-mounted engine model, this excavator has a straight-through gearbox that makes the gears less likely to be sheared off.
- ⚙️【small output shaft diameter】: the output shaft diameter is only 20mm, which takes up little space. the manually operated planter drill bit only takes one or two persons to operate.
- ⚙️【drill bits of three sizes】: the different sizes of drill bits can be easily removed and installed, giving you more flexibility at work. the ergonomically designed double handles can help you operate the machine more stably.
- ⚙️【easy to carry】: with the size of 50x30x30cm and weight of 10.85kg, you can carry it to the place you want without too much effort.
- ⚙️【large power capacity】: the planter drill bit has a power of 1.9kw, which can keep running for a long time.the drill bit has a length of 80cm. it can be used to dig holes of various depths for multiple purposes.
SHOWview product -
Product Highlights
- ❤high efficiency: auger post hole digger - this excavator is equipped with a powerful 198cc two-stroke gas engine. it is rated at 12800r/min and has a power of 5200w/ 12800r/min and can drill 200 holes in 1 hour, so it runs very efficiently.
- ❤ergonomic design: post hole digger gas powered - this drill is ergonomically designed with a double ergonomic handle. the double handle helps you to operate the machine more steadily. in addition, the two handles make it easy to operate with one or two people.
- ❤stable operation: post hole auger - our excavators are two-stroke powered and are not prone to pulling cylinders or stalling, even when temperatures are high.
- ❤robust: hole digger for fence posts - this trencher is made of strong and durable metal and is not easily damaged. in addition, it has a straight-through gearbox, which is different from the side-engine models. the enlarged gearbox provides long-lasting, stable and low-noise operation.
- ❤good heat dissipation: hole digger for planting - we have designed many enlarged heat dissipation holes in the engine housing to help dissipate heat quickly and promptly. this not only extends the life of the machine, but also ensures that the machine does not stall even after long working hours.
SHOWview product -
Product Highlights
- Versatile drill sizes the set contains three drill bits with sizes 4 inch, 6 inch and 8 inch, which allow you to drill holes in different diameters.
- Durability and robustness: the auger is made of high-quality material, which ensures a long service life and a high resistance to wear and damage.
- Powerful motor: the 72cc 2.3hp gas engine provides enough power for efficient digging and drilling in different soil types.
- Easy to use: the auger is easy to use and allows effortless digging of deep and precise holes without much effort.
- Versatile applications: the auger is ideal for various applications such as fence post holes, tree plantings, well drilling and much more. it is an essential tool for gardening and landscaping.
SHOWview product
Coupon copied
