10 Best
Glass Plate For 3d Printers
-
Product Highlights- High viscosity and strong adhesion: composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
- Wear-resistant and scratch-resistant, easy to clean: there is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- Easy to remove model within 1 minute: the coating of the microporous composite material has a microporous structure. the filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
- 0.15mm of flatness recovery model: this is the combination of glass and composite. due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
- High hardness and durable: this is the combination of chemically tempered glass and surface composite coating. the flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
SHOWview product -
Product Highlights
- The glass plate covered by microporous coating, has a strong adhesion during printing. easy to remove models by hand or with a little help from the squeegee
- The special coating is inorganic, with a hardness of 8 moh and a heat resistance up to 400
- The glass plate can fit the heated bed effectively, super flatness, fast and uniform heating
SHOWview product -
Product Highlights
- Tempered glass: made of high hardness and good heat and corrosion resistance tempered glass.
- Special coating: inorganic special coating with 8 mohs hardness, heat resistance of up to 400℃,and can be reused without damaging performance.
- Applicable model: this glass bed printing platform is suitable for cr10 and 10s models with good compatibility.
- Good adhesion: the surface is covered with microporous coating.strong adhesion after heating, no need for solid adhesive assistance.
- Manual demolding: easy to remove the model by hand after the platform has cooled, no tools required.
SHOWview product -
Product Highlights
- No edge curling: the composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. equipped with 4 clips to fix the hot bed.
- Excellent flatness: upgraded ender 3 build plate with smaller creality logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3d printing.
- Wide compatibility: this glass bed is compatible for 3d printer like ender 3, ender 3 pro, ender 3 v2, ender 3 s1, ender 3 s1 pro, ender 5, ender 5 pro etc, confirm the platform size of your printer firstly.
- Super convenient: it is very easy to remove the prints. the surface of our tempered glass bed is a layer of microporous composite coating. it will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
- High grade material: made of 100% genuine borosilicate glass, thick and high quality. glass bed's hardness is up to 8 mohs and is capable to work up to 400 ℃. using alcohol or acetone to wipe it after repeated use.
SHOWview product -
Product Highlights
- To print with abs or pla, lightly spray the surface of the glass with aquanet hairspray, then install the glass.
- Good fit creator, creator pro, dreamer and other 3d printers with 155mmx235mm printbed size.
- Size: 155mm x 235mm x 3mm
- Flat polished edge for safe to handle
- Designed by go-3d print in califonia
SHOWview product -
Product Highlights
- 2. high performance: silicon carbide glass is chemically resistant, has a high coefficient of thermal conductivity, is wear-resistant and can withstand extreme temperatures. 3. reliability: the special coating is inorganic, with a hardness of 8mohs and heat resistance up to 400°c.
- 4. easy to clean with water or alcohol. do not soak the platform with alcohol. simply wipe the platform with a cloth soaked in alcohol. do not wipe hard. if you wipe hard, the protective layer will be damaged.
- 1. improved adhesion: superplate is covered with micropores, through which a high degree of adhesion is guaranteed.
- 3. reliability: the special coating is inorganic, with a hardness of 8mohs and heat resistance up to 400°c.
- 5. easier to remove the print by hand or with a scraper. we use silicon carbide glass with a microporous coating as the build platform for 3d printers, so that no masking tape needs to be attached.
SHOWview product -
Product Highlights
- 2.high temperature resistant & excellent adhesion: this 3d printer heated bed glass is made of borosilicate glass, which is higher temperatures than normal sheet glass. can be placed on top of any existing hotbed surface. our state of the art carbon & silicone build surface provides the best adhesion in the market. it has a nice texture on surface that helps with bed ad...
- 4.no tools required for model removal: the ender 3 glass bed is great to help with the removal of prints. once the hotbed cools back to room temperature, the glass bed will release the model which can be easily removed by hand. large models can be easily removed using tools such as a blade.no more scrathch or stab yourself with a scraper again. note: 1. we suggest remov...
- 1.high-performance&durable and reliability: an ideal platform heated bed for 3d printing. integrated with heated bed: super flatness, fast and uniform heating. easy to clean by alcohol/ water. the special coating is inorganic and has a hardness of 8 mohs, and this creality 3d glass plate is capable to work at 400ºc. upgraded 3d printer platform tempered glass plate buil...
- 3.super flatness 3d printer build platform: this upgrade 3d printer hot plate offers more smooth and flat printing surface than other normal. reduces warping, please noted that platform has to be properly leveled. this ender 3 bed is a flat, heat resistant plate.completely flat. this heated bed platform solves that problem once and for all.it's a nice upgrade to the ori...
- 5.updated 3d printer hot bed: small logo is printed in the bottom instead of the big creality logo in the middle to avoid the printes be impinted with the creality logo. after design update,the prints will have a smoother finished on the finished part. perfect printing size 235x235x4mm. hotbed glass build plate for creality 3d printer ender-3 / ender-3 pro ender-5 / end...
SHOWview product -
Product Highlights
- To print with abs or pla, lightly spray the surface of the glass with aquanet hairspray, then install the glass.
- Borosilicate glass plate, compatibility: compatible with creality 3d printer ender-3, ender-3 pro, ender-3x, ender 5
- Size: 235mm x 235mm x 3mm
- Flat polished edge for safe to handle
- Designed by go-3d print in califonia
SHOWview product -
Product Highlights
- No edge curling: our tempered glass composite coating provides superior strong adhesion when heated, and the prints adhere firmly to the build surface without glue, avoiding the issue of curling around the edges of the prints.
- Easy to maintain: our glass bed is very easy to clean - just wash it off with warm water and dish soap water at room temperature.
- Note before oder:our glass bed fits for printers using 220x220 size platform, like mk2,mk2a, anet a8, anet a6, reprap, mendel,wanhao duplicator i3,monoprice maker,not fit for ender 3、5 etc series,please confirm your printer platform size before ordering.
- Excellent flatness: we only use high quality tempered glass with no scratches, dents,providing a flatter and smoother build surface, ensuring high flatness on the bottom of the prints when 3d printing.(thickness deviation 0.2mm).for more stable printing,equipped with 4 clips for fixing the heated bed.
- Customer service:if you have any questions or need technical support about the product, please click "ask a question" through our storefront page or report a problem through the "your orders" page. we will reply within 24 hours.
SHOWview product -
Product Highlights
- 【no edge curling】the 3d printer glass bed is coated with composite materials with microporous structures. as the temperature increases, the micropores of the hot bed expand and the adhesion increases, making the printed matter firmly adhere to the construction surface, avoiding edge curling of the printed matter. clean with water or soapy water after use.
- 【excellent flatness】the 3d printer board provides a flatter and smoother construction surface, ensuring a high flatness of the printing bottom. and, temperature for different filament consumables: for pla: 50-70℃. for tpu: 50-70℃. for abs: 100-125℃, 110℃ is recommended. for pc: 100-130℃, 120℃ is recommended. for nylon: 90-120℃, 110℃ is recommended. for pp: 100-130℃, 120...
- 【compatibility】the glass bed platform is suitable for anyubic mega s and other models. please ensure that your printer platform is compatible with the printing size. the special coating of the glass construction board is inorganic, made of 8% genuine borosilicate glass with a hardness, working at 400℃. during the printing process, the bottom of the print is no longer su...
- 【easy to remove model】the microporous composite coating on the surface of the glass construction board contracts as the hot bed cools, greatly ensuring that complete small printed items can be manually picked up without tools, and large printed items can be easily removed using tools, saving time for you to remove the printed items.
- 【100% satisfaction guaranteed】we promises every customer a 100% shopping satisfaction, reach us if you have any questions about your purchase. if the 3d printer plate fails to make you satisfied let us know right away so we can send you a full purchase refund. if you have any question, please contact with our customer service.
SHOWview product
Coupon copied
