10 Best
Heatsink For Leds
-
Product Highlights- Safe and non-toxic - this thermal adhesive is non-electrical conductive, safe, and non-toxic, making it safe for both users and electronic components. it is odorless, moisture-resistant, and non-swelling, ensuring that it does not damage the substrate over time. important: it is important to note that this thermal glue should not be used between the cpu and heatsink.
- Quick drying time - this thermal adhesive cures quickly upon contact with air, with a drying time of approximately 30 minutes at 25℃. this makes it easy and convenient to apply, with minimal downtime required.
- High thermal conductivity - with a thermal conductivity rate of 0.975w/m-k, this thermal conductive glue helps disperse heat effectively from mosfets, leds, ics, gpu chipsets, and other electronic components that require direct bonding. it is suitable for all heatsinks without a fixed clip, and can be used for a wide range of applications.
- Strong adhesion - this thermal plaster features strong adhesion properties that allow it to bond with most metals and non-metals, ensuring a reliable and long-lasting connection. the strength of the connected buildings is 55 lb, making it a high-performance option that delivers excellent results.
- Wide service temperature range - with a service temperature range of -60~250 degrees celsius, this thermal adhesive is suitable for use in a wide range of industries and applications. it has good thermal conductivity and stability, and is ideal for use in electrical appliances, instruments, and other industries that require effective heat dissipation.
SHOWview product -
Product Highlights
- High quality-- the heat sink is stamped and formed from high-quality aluminum machine tools with good thermal conductivity, sturdy ans durable.
- Good performance-- heat sink size: approx. 40 x 20 x 40mm / 1.6 x 0.8 x 1.6in.it is designed to maximize appearance area in contact with cooling air
- Light weight-- aluminum heat sinks features light weight, can be applied to products that are more lightweight, convenient to use
- Application-- this heatsink fits for raspberry pi 1 generation/2 generation/3 generation, set-top box, led, player, router, security, cpu, north and south bridge chip, ic radiator, mos module, triode, power supply, electronic tube, pcb power board, memory, electrical appliances, electronic components and more
- High security-- the heat sink can reduce the risk of hardware failure due to overheating, high security and reliability
SHOWview product -
Product Highlights
- Size: 100 x 69 x 36mm / 3.93 x 2.71 x 1.41 "
- It is made of large quantity aluminum, good thermal conductivity.
- Tooth number: 23
- It is designed to maximize its appearance in contact with the cooling air.
- Widely use for computer, power ic, electric power device, led light fixtures, etc.
SHOWview product -
Product Highlights
- 【excellent aluminium material】: made of aluminium high quantity, good thermal conductivity. lightweight and used in applications where weight is of great importance.
- Application: fit for 8 pieces 3 watt leds or 20 pieces 1 watt leds. specially designed for high performance - household - led - light - or aquarium - led - devices etc.
- Size: 300 x 140 x 20 mm / 11.81 x 5.51 x 0.78 inches.
- 【purpose】designed to maximize the surface on contact with cool air and reduce the risk of led light failure due to overheating.
- Note: before purchasing, make sure that the size of the heat sink fits this component.
SHOWview product -
Product Highlights
- Compatible with: ddr2/ddr3/ddr4 and single/double side(s) ram
- Light effcet : designed with a standard 3 pin connector, can connect to argb controller or part motherboard(asus z370 e/f/i, z390 etc..)
- Software control: support to motherboard 5v 3pin rgb connector, compatible with asus aura rgb or msi mystic light or 5v rgb controller
- Cooler vest: both sides are made from aluminum magnesium alloy, which can lower the temperature of ram efficiently
- The onewatt memory led cooling vest kit sets up lighting inside
SHOWview product -
Product Highlights
- Large area heat dissipation: maximize surface area designed in contact with the cooling air. the 8pcs fins increase the area of the board and thus provide for greater heat transfered.
- Versatile use: aluminum chipset heatsink can be used in a variety of applications, such as computer, led light devices, power transistor, fet, ic, power amplifier, voltage regulator, power electric device, mosfet etc..
- Material: heat sink made of high quality aluminum, good thermal conductivity, it is the first choice of heat dissipation materials.
- Preventing overheating: aluminum heatsink can reduce the power loss of the device, provide efficient heat dissipation for electronic devices and other components, which prevent overheating and damage caused by excess heat.
- Heatsink specification: small in size, light in weight. size: 100x25x10mm/ 4" x 1" x 0.4"(l*w*h). net weight: 6.1oz. package content: 5 x heatsinks.
SHOWview product -
Product Highlights
- [ optimised sickle blade ] - 140mm fan with improved blade curvature which provides superb aerodynamic efficiency with excellent air flow( up to 81.7 cfm) and air pressure( up to 1.93 mm h2o).
- [ silent operation ] - akasa argb fan with reinforced frame and anti-vibration pads which add rigidity and minimise the transmission of vibrations whilst turbulence and noise.
- [ over 16 million colour combinations ] - maximise your aesthetic with a multitude of visual possibilities with argb. compatible with gigabyte, asus, razer, msi and asrock lighting software.
- [ powerful pwm cooling ] - intelligent pwm speed control ensures that the fan cools your system efficiently, staying quiet under lower loads and performing effectively otherwise.
- [ advanced hdb technology ] - new mhd bearing features smoother rotation which extends fan life and reliability up to 40,000 hours and a lowering fan noise.
SHOWview product -
-
Product Highlights
- 【made of high quality aluminum】made of high quality aluminum, great thermal conductivity. an aluminum heatsink is a passive heat exchanger that efficiently transfers heat through electronic signal or mechanical signal with device, thus keeping a regulation of the temperature of the device at an optimal level
- 【cheerful 4 pack heatsink & thermal pads】 4 x aluminum heatsink cooling fin (each 70mm x 22mm x 6mm), large surface area and great fins; with 4 pieces of double-sided thermal tape whose thermal conductivity: about 1.3 w / (m·k).
- 【to save your device from fail prematurely】reduce the risk of hardware failure due to overheating. the gap of these akuoly heatsinks between the larger fins increases the area of the board and thus provides for greater heat transfer
- 【suitable for various devices】 suitable for heating elements on wi-fi routers, m.2 ssd, ac adapters, chargers, high power amplifier transistor semiconductor devices and so on
- 【note before adding to basket】 please note each size of these heatsinks is 70mm x 22mm x 6mm. please make sure that the size of these heatsink fits your component or device before buying
SHOWview product -
Product Highlights
- Reduce the risk of led light failure due to overheating
- Light weight and used in applications where weight is a big concern
- Made of high quantity aluminum, good thermal conductivity
- Designed to maximize its surface area in contact with the cool air
- Specially designed for high power household led light or fish tank led devices, etc
SHOWview product
Coupon copied
