10 Best
Hole Saw For Metal Cuttings
-
Product Highlights- ⭐carbide hole cutter --- tungsten wire pliers can cut steel, iron, aluminum, copper and cast iron. in addition, stainless steel and other metals can be cut to a depth of 25 mm.
- ⭐ hole saw kits --- t.c.t. knives are the standard for power, transportation, and general metalworking. a spring that guides the drill ejects the chips.
- ⭐ hole saw --- the laiwei carbide hole saw (tct hole saw) is an excellent alternative to conventional bi-metal hole saws. they're faster, cleaner and last longer. cutting diameter tct hole saw laiwei 1-3/4"(45mm hole saw)
- ⭐ drilling --- spring pilot drill removes chips and saves time. second, the cutter body cuts clean, burr-free holes faster than traditional twist drills and hole saws.
- ⭐ carbide hole punch --- under normal conditions, this tool will last longer than other punching tools.
SHOWview product -
Product Highlights
- Excellent design: csc hole saw has a constant pitch of 8 teeth per 25mm/inch for super smooth cuts. the side grooves speed up the chip evacuation. flared safety stop cap at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13mm (1/2") to avoid accidents and damage.
- Easy to use: insert the pilot drill until the hole saw wears the materials surface. when the saw starts to cut, slowly cut it into the material without pushing. after the hole saw passes through the other side of the material, stop the drill.
- Top-quality: csc cordless extra cobalt hole saw is made with hardened and abrasion-resistant high-speed steel teeth and an alloy body and cap for exceptional performance and toughness.
- Efficient: our hole cutter is designed for use with battery-operated power tools, csc hole saws will cut twice as many holes as the equivalent standard hole saw per battery charge.
- Complete assembly: comes as a complete hole saw assembly, including an arbor, pilot drill, and ejector spring to meet your professional needs. therefore, no need to purchase a separate arbor and pilot drill kit.
SHOWview product -
Product Highlights
- ✅【max cutting depth 44mm】with max cutting depth 44mm and ideal for drilling on metal (even high strength metal because of hss m42 with cobalt 8% teeth), the cutting depth should not exceed 3mm, depends on the hardness of the metal and taking bench drill or pistol drill
- ✅【accessories specification】2pc center 1/4" drills with length 80mm in this kit are all made of hss m2 and fully ground, 1pc drill with 3/8" hex shank (for hole saw 14-30mm), 1pc drill with 7/16 "hex shank (for hole saw 32-152mm) one of the drills can be used with the adapter for hole sizes larger than 32 mm
- ✅【high quality material】: workpro hole saw is made of high speed steel m42 (not carbon steel) with cobalt 8% and hardness hrc 64-69 cutting teeth, it's long-lasting and reliable to use on workpieces like stainless steel, aluminium, copper wood, plastic, etc
- ✅【6 size for multi-purpose】ø19mm, 22mm, 29mm, 38mm, 44mm, 57mm. it covers the most common hole saw sizes on the market. storage size: 20.5 × 15.5 × 8cm
- ✅ 【portable and long-lasting aluminum case】storage size: 20.5 × 15.5 × 8cm. it has been well organized in a sturdy aluminum case with lock and handle, helping you easy carrying out for working
SHOWview product -
Product Highlights
- ✅smoother and faster cut: with its tpi tooth design and extra cobalt hss tooth material, the fast cut saw ensures a smoother and faster cut. it provides minimal vibration and reduced noise levels, resulting in a clean and precise cutting experience.
- ✅versatile cutting abilities: while specifically suited for cutting thin stainless and mild steel sheets, the fast cut saw can also cut through wood, plastic, plaster, and other materials. its faster cutting speed and greater material removal allow users to efficiently tackle diverse projects.
- ✅enhanced durability and performance: the garhwal - fast cut saw features a new tooth material and design, along with enhanced heat and wear resistance. its heavy-duty bi-metal construction ensures improved durability and performance for various cutting tasks, making it a reliable tool.
- ✅universal fit and easy to use: the fast cut saw comes with a universal fit and quick change design, making it effortless to use for a wide range of applications. the included 3 flat secure grip shank arbor allows for compatibility with power tools and drills, providing convenience for both diy enthusiasts and professionals.
- ✅added convenience features: the fast cut saw has several added features for user convenience. the kit includes a center drill bit, hexagonal wrench, and ejects saw plugs for easy removal. it has an anti-corrosion coating for excellent resistance to wear and impact. the user-friendly design offers improved stability, good toughness, a non-slip shank, and anti-skid featu...
SHOWview product -
Product Highlights
- Wide application: hole saw set is suitable for bench drills, electromagnetic drills, pistol drills, electric hammers, etc. used for stainless steel plate, square tube, iron, cast iron, wood and other common sheet metal.
- Hole saw diameter: 16mm / 0.62 '', 18.5mm / 0.71 '', 20mm / 0.78 '',25mm / 0.98 ', 30mm / 1.18'' approx.hole cutters are individually cased in plastic box and each bit is also oiled - prevent rust.
- High quality stainless steel hole cutter: hole saws perforated device with super-hard tungsten steel material, after high-density grinding and high-end thermal treatment. with high hardness, good toughness, high concentricity characteristics.
- Perfect design: the spring loaded pilot bit ejects the cut slug, saving time. the cutter body cuts a clean, burr-free hole faster than conventional twist drills or hole saws.
- Customer service: we thrive for excellence and hence our professional customer service ensures your satisfaction. our product is backed by our manufacturer with quality assurance guarantee.
SHOWview product -
Product Highlights
- [material] high speed steel (hss) bi-metal made of heat treated and rust proof function,great heat resistance and anti-abrasive,high speed steel teeth for fast and clean cuts, boasts advantages of high-performance, rust protection and durable,was built tough for repeat use.
- [tipp] when using the hole opener kit for a long time, please control the rotation speed appropriately, rpm≤1000, it is easy to cause high-speed wear of the hole opener. the surface of the product is coated with a thin layer of protective oil (anti-oxidation, anti-rust), please be careful not to stain and check the condition of the hole opener.
- [11pcs bi-metal hole saw kit] : include 3/4''(19mm)/7/8''(22mm)/1''(25mm)/1-3/32''(28mm)/1-3/8(35mm)/1-1/2''(38mm)/1-3/4''(45mm)/2''(51mm)/2-5/32''(55mm)/2- 8/32''(58mm)/2-9/18''(65mm),a variety of sizes can meet your different needs.the cutting depth below ø51mm is 25mm, and the cutting depth above ø51mm is 32mm.each hole saw has a arbor with drill bit.
- [wide application scenarios] with ultra sharp serrations for faster and cleaner cutting, high precision, smooth cutting edges,much more durable andcan offer a longer life.versatile cutter that can be used in a wide variety of applications.ideal for wood and metal, it can easily drill wood, plastic, plywood, thin metal.
- [100% satisfaction] provide 60 days free return and replace service to make sure our customers’ satisfaction with every purchase. if you got imperfect hole saws, just contact us via email directly, we will be responsible for the quality of our products, just enjoy your purchase!
SHOWview product -
Product Highlights
- Excellent quality : high-speed steel cutting edge provides shock resistant teeth and resists tooth strippage, which made of carbide, with higher toughness, stronger wear resistance and higher performance cutting strength.（ with 5-10 years use time）
- Easy to use : meet all of your cutting and drilling needs with sharp teeth and center drill with spring ,this hole saw cuts smooth and easy. the spring on the drill would automatically pushes the wood chops out of the saw immediately after completing the hole.
- Package included : diameter: 6 * hole saws (22mm 30mm 35mm 45mm 50mm 65mm);
- Widely used : these hole saws are ideal for work where high performance and accuracy are needed. excellent for cutting hard metal and stainless steel,sheet metal,mild steel,aluminum,cast iron in seconds.
- Satisfactory service : customer satisfaction with our products is our ultimate goal of selling products. if you have any questions about the product, please feel free to contact us. we will have professional customer service to solve the problem for you within 24 hours.
SHOWview product -
Product Highlights
- Radiused tooth back reduces stress on teeth. positive rake angle for fast cutting.
- Suitable for cutting accurate holes in timber, plastic, fibreglass, chipboard, craftboard, plaster, drywall, aluminium and thin sheet metal
- Deep-cut style hole saws for improved efficiency and versatility.carbon steel height and double-tooth design for increased durability.
- 16pc holesaw set which includes 13 carbon steel holesaws, 2 arbors, 1 reinforced metal plate and 1 allen key. includes sizes 19, 22, 25, 28, 32, 38, 44, 51, 64, 76, 89, 102, 127mm holesaws
- The pilot bit, with its 135 degree split point, allows for fast, skate-free penetration and smooth, precise holes. each hole saw is finished with black oxide to prevent rust.
SHOWview product -
Product Highlights
- Application: the drill group is suitable for drilling in iron, aluminum alloys, and other materials, can cut steel plates, iron, aluminum, copper, cast iron, the most important thing is to cut stainless steel and other tenacity alloy
- Easy to use: the tct cutting machine meets the standard of electrical construction, transportation work, and general metal manufacturing, with high precision, guided spring bomb, easy to use saving time
- High quality stainless steel: tct hole saw kit is made of high-quality stainless steel, durable, long service life, is an excellent substitute for traditional bimethedral saws, which are cut faster, cleaner, longer service life
- Not easily deformed: the aperture saw is high hardness, and it is not easy to deform during the drilling process to enjoy better performance, suitable for hand-held electric drill, vertical electric drilling machine and mobile belt magnetic drilling machine
- Multiple sizes: hole knife group consists of 10 sizes of drill bits, fast cutting clean circular holes, can meet your different needs, is your good helper, you can reuse
SHOWview product -
Product Highlights
- Cut a perfect circles - fast and precise cuts a hole into stainless steel sheet, metal, cast iron, alloy, brass and other tough alloys.
- Adaptation - 3 flat surfaces antislip shank design, can be used on hand held drill, bench drills, magnetic drills and other rotating machines.
- Industrial grade metal hole cutter - made of carbide with tungsten tipped provide superb product life and cutting performance.
- More efficient - sharpness and harden tipped with optimized design penetrates object with easy and smooth.
- Warm tips - keep the drill running evenly at a low speed for extending hole cutter life. please add coolant when working on stainless steel and steel metal sheets above 5mm.
SHOWview product
Coupon copied
