10 Best
Lamp Holders
-
Product Highlights- Maximum diameter 32mm, height 48mm - 10mm m10 or 1/2" 26tpi threaded entry, reducing to 7mm cable aperture. this 22mm bc (bayonet connector) lamp holder is intended primarily for attachment to a male 10mm or 1/2" threaded tube - integrated hollow earth terminal, wires from the inside so no wires are visible externally
- Hand assembled - easy to separate for fitting: simply remove the thin upper shade ring by unscrewing anti-clocwise; hold base with the earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. when re-assembling ensure ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert
- Standard unswitched b22 (22mm) bc bayonet cap lamp holder with shade ring - suitable for bulbs up to 200w (for switched b22 version, elektek safety switch available in separate listing)
- Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use (beware of cheaper, pressed type bases that cannot carry a locking screw) - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring
- Made in the uk
SHOWview product -
Product Highlights
- T2 terminal type - changed the lamp holder. certified by ce.
- An effective fitting for a ceiling or wall light fixture is the bc b22 cap ceiling pendant holder. a wall lamp, a pendant light, a night light, or a ceiling light are the best for temporary lighting. ideal lighting solution for homes, garages, basements, store rooms, workshops, corridors, balconies, car porches, under-stairs areas, attics, and other rooms.
- Cord grip lamp holder for lamps and bulbs with bayonet caps.
- The lampholder is a perfect substitute for a standard center light pendant light fitting because it has two tags on the inside that the cable can be hooked over.
- Easy to install: the b22 holder is simply hung, with simple wiring that makes installation quick and easy. for temporary pendant lighting in buildings, the b22 holder is ideal. direct vac 250v connection.
SHOWview product -
Product Highlights
- This ceiling pendant holder is perfect for ceiling or wall light ideal lighting solution for homes,corridors,store rooms,garages, under-stairs areas and other rooms.
- Our lamp holder offers compatibility with standard-sized bulbs and easy installation, simply pair it with your desired fixture. you can use it very efficiently & fluently without any issue.
- Our lamp holder is made of high-quality available in white colour which will increase the beauty of your home it also maintains its quality over time
- Holder is used more in large business places like automotive repair shops, mechanical garages, industry, schools, colleges, hotels, hospitals,and other working places.
- This bayonet batten is a gift for family because its use is included in daily needs, the safety of your lighting setup and provides peace of mind.
SHOWview product -
Product Highlights
- For all types of b22 (22mm) bayonet cap bulb: incandescent, led and halogen
- Dimensions: please check your thread size before you order - choice of 10mm (m10) or 1/2" (26 tpi) threaded bottom entry - as a guide, newer lamps will 'tend' to be 10mm (metric), old lamps will 'tend' to be 1/2" (imperial); height: 63mm, diameter: 32mm (max.); cable/flex aperture/opening approx. 7mm
- Important: switch will only work when a bulb is fitted - patented safety switch push-bar design - make sure lamp holder is fully screwed together when assembled so that centre safety pin correctly depresses when a bulb is installed.
- Made in uk: solid brass construction with solid brass shade ring. always remember: metal fittings must be earthed
- Suitable for lighting circuits only - t2 temperature rating (220°c). fully approved to bs 7895:1997
SHOWview product -
Product Highlights
- Extra wide skirt to accommodate ballast of energy saving bulb colour: white power: 250v~ conforms to bsen 61184
- Pifco b22 bc batten straight lamp holder surface mounting ideal for use in confined spaces such as bathrooms
- Ce approved surface mounting. ideal for confined and awkward places such as bathrooms and cupboards, with extra wide skirt to accommodate ballast of energy saving bulbs.
SHOWview product -
Product Highlights
- 【size packaging】you can get 2 electric light lamp holder, the size of a single electric light lamp holder is about 2.6*5.6cm.
- 【easy to use】small and lightweight, easy to install and quick to install without complicated tools. save time and energy.
- 【material】made of high-quality plastic and metal, our electric light lamp holder are durable and wear-resistant for long-term use.
- 【feature】fine workmanship and smooth surface. corrosion-resistant, not easy to rust. excellent electrical conductivity, good insulation, can pack your safety during use.
- 【be applicable】fits most bulbs and is your ideal bulb replacement accessory. convenient for your use.
SHOWview product -
Product Highlights
- 【simple design】medium base screw-in socket with threaded plastic cord grips and self-lock lamp wick clasp, this lamp holder is simple in structure, has an industrial and retro style, rated to 80watts and 250 volts.
- 【broad applicability】the light bulb socket can be used with any e27 based light bulbs, led, halogen, cfl bulbs, etc., ideal for diy lighting fixtures on various occasions, retro pendant light, canning jar light, lamp fitting and more.
- 【durable material】the black lamp holder is of bakelite, a thermosetting resin, heat-resistant up to 200℃, flame-retardant and corrosion-resistant for long-term indoor use.
- 【easy installation】pack of 6, easy to assemble it and connect wire. after connecting the wire, assemble all the parts together, finally screw in your bulb. ce certification ensure your safety, fully compliant with eu, uk and european safety standards.
- 【satisfaction guarantee】our e27 bulb holder has 2 months refund/ replacement guarantee, 12 months product defect free replacement warranty. feel free to contact us for any product issues and we will reply you within 24 hours.
SHOWview product -
Product Highlights
- Easy to install,simply fit your b22 base bulb to the lamp holder, then plug straight into your electrical socket and switch on using the switch
- Bulb holder b22 white period shape lamp pendant with lamp shade ring(shade hole diameter required is between 26mm - 30mm,32mm at widest part)
- B22 black switch light socket bayonet cap fitting with screw terminals
- Bayonet socket that used with diy floor lamp or table lamp kits.
- It is a good way to rewire a table lamp,it also can be used to rewire an existing floor or pendant lamp
SHOWview product -
Product Highlights
- 💡【exquisite braided rope wire】this cable is a braided cable. the braided can effectively protect the internal cable, making it not as easy to age and break as ordinary wires. it is a safer and more advisable choice.
- 💡【safety certification】the e27 socket is a spiral lamp head. this lamp holder is suitable for all e27 thread light bulbs (up to max. 60w). switches and plugs are professionally tested and have ce safety certificates.
- 💡【easy install】the lamp holder including with a cable, on / off switch, and standard uk plug. you can light it by adding a light bulb and an outlet. the detachable e27 socket allows you to shorten the power cord to the desired size. wind or run the cable through a shelf, furniture, spotlight, or lamp base.
- 💡【compatibility】works with any type of e27 bulb perfectly. a hanging light socket can be used for a bedside lamp, floor lamps, and wall lamps with a simple nail. you can create your own design, and realize your own perfect diy project.
- 💡【multi-scene application】the lamp holder has a 2/3/4 meters cable for your choice. can be used in many diy decorations such as a lamp with the included hook, wall lamp with a simple nail, bedside lamp, floor lamp, or hand lamp. they can hang into a variety of shapes.
SHOWview product -
Product Highlights
- Simple design: this lamp holder uses a simple design, generous and beautiful, will not affect the overall beauty of your house, perfectly matching for any style of home decorations! if you are a minimalist, then you should not miss it! the simple design also make this attractable and durable.
- Safe and durable: diy projects light holder made of high quality plastic material with fire, heat and corrosion resistance, and the vintage lamp holder can be perfectly mixed with different shapes and colors of bulbs. our light holder is constructed from premium, flame-resistant materials. heat resistance, corrosion resistance, and no fire risk
- Quality material: the adjustable lamp holder is made of bakelite, a thermosetting resin that makes it heat, flame, and corrosion-resistant. it also has threaded cable grips for locking and shielding cables, extending its useful life. the light socket is strong and safe. these premium quality material make this strong and safe.
- Easy to use: solid brass light holder is quite simple to use. to access the 2 wires inside, you simply need to unscrew the base. perfect for making your own lighting or restoring vintage lamps. put this antique lamp holder together by simply connecting the positive and negative poles of the wires in the correct order
- Wide application: this solid socket can be used for various light sources, such as led, cfl, halogen bulb and incandescent lamp. ideal for use in bar, restaurant, cafe, shop window, kitchen, living room, bedroom, etc. this light socket is an ideal fixture for providing creativity and welcoming to your kitchen or home. you can place this alone or you can add them in groups.
SHOWview product
Coupon copied
