10 Best
Laser Detector For Homes
-
-
Product Highlights
- Wider temperature range: infrared from -58℉~1202℉(-50℃~650℃), type-k thermocouple probe from -40℉~932℉(-40℃~500℃), adjustable emissivity from 0.1 to 1.0
- Four mode display: infrared thermometer built-in hygrometer with a tricolor light indication as reading goes close to dew point temp, and read ambient air temp, relative humidity, and dew point on the large multi-line backlit lcd display
- Easy to use: you to quickly detect areas prone to mildew growth with a simple scanning motion and without direct surface contact, it also has a type k thermocouple probe to take contact measurements
- Accurate: with a distance to spot ratio of 12:1, this ir thermometer features 9-point lasers for a better indication, super quick response time at less than 500 ms, accurate up to ±1.5%
- Multifunction: this laser thermometer with switch ℃/℉ and uv light, data hold, low battery indicator, auto-off function for home and industrial settings, cooking food, oven baking, grilling, freezing, brewing, hvac, automotive repair, and more
SHOWview product -
-
Product Highlights
- The newly upgraded detector is designed with front and rear led displays, which can easily receive front and rear lasers. the receiver can receive green and red laser lines, compatible with firecore brand laser levels
- The firecore laser receiver has ip54 protection level, which is effectively waterproof and dustproof, and suitable for outdoor construction or construction sites.
- The precision of the laser receiver is ±1.5mm and the longest working distance is up to 50m. two air bubbles in the front can better ensure the accuracy of the results, and can meet the laser inspection requirements of most construction sites.
- There are two magnets on the top and sides of the receiver, which can be attached to metal objects. the bottom has a 1/4 screw interface, which can be installed on a tripod to meet the detection needs of different angles on the construction site.
- The laser detector is equipped with 2 aaa 1.5v batteries, which can be used continuously for 20 hours.
SHOWview product -
Product Highlights
- 【available for red and green pulse laser】- turn on the pulse mode of the laser level, then huepar lr-6rg laser receiver allows detection of red and green pulse laser beams in difficult light conditions, distances up to 60m/196ft.
- 【precise optical and acoustic signals】- this laser receiver features a user-friendly interface and is smart in its simple design. optical and acoustic signals help to locate the laser plane quickly and accurately. the led indicator provides a clear and accurate signal. beep sounds will remind you when you find the target.
- 【huepar dedicated receiver】- huepar lr-6rg receiver can only use with huepar laser level with pulse mode. please note can not be used for rotary laser level. recommended for use in accompanied with huepar 901cg/902cg, box-1g/r , gf360g/r, 621cg/r, 622cg/r, 602cg/r, 603cg/r laser level.
- 【clear multi-sided readouts】- ergonomic design with display on the front, side and back of receiver, offers easier visual readout. this unit is outfitted with a dual-sided bubble vial on both the front and top, in order to more accurately determine the level.
- 【long battery life and clamp holder】- the receiver comes with a 9v dry battery, providing you with about 70 working hours. there is also an automatic shut-off feature that power down the device after about 8 minutes of being idle to extend battery life. the attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.
SHOWview product -
Product Highlights
- 【super accurate sensor】the high-precision laser particle sensor has a lifetime up to 20,000 hours. combined with the particle swarm optimization algorithm, it can accurately measure haze and smog particles as small as 0.3um, making particle measurement more accurate.
- 【user-friendly】3 buttons for 3 functions; simply press each function button on the front panel to enter corresponding pm2.5 or pm10 or histogram info page. large tft screen and rich display make it clear and easy to read data, even with a battery indicator light to help you check the battery at any time.
- 【3-in-1 air quality detector】this 3-in-1 detector is exclusively designed for particles only. it monitoring pm2.5, pm10, and has the histogram function.
- 【easy to use】easy to operate with simple system settings through few function buttons. large tft color lcd screen intelligently displays the testing results, easy and clear to read. the new histogram function can visually reflect the change in pm2.5 concentration within the last 12 hours.
- 【wide application】suitable to use at: home(kitchen, bedroom and etc.), office, car, travel, camping, and party, etc.. test the air quality anytime anywhere to be away from harmful of pm2.5 or pm10
SHOWview product -
Product Highlights
- 【portable detector】our finder is 2.5cm * 1.5cm * 10.8cm, which is only the size of a pen. its small size and lightweight design make it easy to carry to various occasions, giving you more protection at any time.
- 【flexible scope of use】our upgraded detector has a six gear signal conditioning function, which can arbitrarily narrow and expand the detection range within 10 meters. it is a necessary tool to protect your personal privacy and business information security.
- 【more complete functions】our detectors can not only search hidden cameras and monitors, but also prevent location and phone monitoring. it supports functions such as rf signal eavesdropper, gps detector, camera lens detector, monitoring device detector, etc., helping you easily obtain an absolute privacy environment.
- 【simple operation】our detector has only a few simple buttons, which is very easy to operate. when detecting the camera, you only need to turn on the device and move it up, down, left and right to scan the surrounding environment. if there are strong blinking points, it is the camera. gps positioning can also accurately detect various vehicle mounted detectors to ensure ...
- 【long battery life after charging】our intelligent detector adopts usb charging interface, which can ensure continuous use for 24 hours or standby for a week after a full charge, without worrying about battery replacement or frequent charging.
SHOWview product -
Product Highlights
- Reassuring -- pm2.5 is recognized by the who as a category 1 carcinogen, which poses potential hazards to human health,and even increases the risk of cancer. temtop pm2.5 monitor s1 helps you detect the air quality in time, ensuring every breath of air you breathe is fresh.
- Visualized and easy to operate -- large 3.3 inch lcd screen with large digits display and air quality indicator : poor/fair/good；long press the setting button to switch：℉/℃
- Improve the quality of life -- temtop s1 can monitor the concentration of pm2.5 in the air, including aqi, temperature and humidity, helping you understand whether the environment is healthy and comfortable, and improving the quality of life
- Cost effective--the innovative technology perfectly integrates the laser particle sensor and product together, which reduces the production cost by 38%, thus creating a cost-effective air quality tester and making the high-precision air quality monitor within reach
- Advanced sensitive & accurate sensors -- this air monitor has a built-in fan that draws in ambient air quickly, combined with a laser sensor to measure the level of dust particles for real-time air quality measurement
SHOWview product -
-
Product Highlights
- 【available for red and green pulse laser】- turn on the pulse mode of the laser level, then huepar lr-5rg laser receiver allows detection of red and green pulse laser beams in difficult light conditions, distances up to 50m/165ft.
- 【precise optical and acoustic signals】- this laser receiver features a user-friendly interface and is smart in its simple design. optical and acoustic signals help to locate the laser plane quickly and accurately. the led indicator provides a clear and accurate signal. beep sounds will remind you when you find the target.
- 【huepar dedicated receiver】- huepar lr-5rg receiver can only use with huepar line laser level. please note can not be used for rotary laser level. recommended for use in accompanied with huepar 901cg/902cg, box-1g/r, 8211g, 621cg/r, 622cg/r, 602cg/r, 603cg/r, gf360g/r laser level.
- 【large reception window & dual lcd display】- large reception window of 5cm and optical and acoustic signals help to locate the laser plane quickly and accurately. dual lcd displays for easy visual readout on both sides of the receiver. lcd backlight provides a clear look even in low light conditions. adjust the height until the horizontal datum line and the arrow disapp...
- 【long battery life and clamp holder】- the receiver comes with 2 x aa battery, providing you with about 20 working hours. there is also an automatic shut-off feature that power down the device after about 10 minutes of being idle to extend battery life. the attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.
SHOWview product -
Product Highlights
- 【available for red and green pulse laser】- turn on the pulse mode of the laser level, then huepar lr-5rg laser receiver allows detection of red and green pulse laser beams in difficult light conditions, distances up to 50m/165ft.
- 【precise optical and acoustic signals】- this laser receiver features a user-friendly interface and is smart in its simple design. optical and acoustic signals help to locate the laser plane quickly and accurately. the led indicator provides a clear and accurate signal. beep sounds will remind you when you find the target.
- 【huepar dedicated receiver】- huepar lr-5rg receiver can only use with huepar line laser level. please note can not be used for rotary laser level. recommended for use in accompanied with huepar 901cg/902cg, box-1g/r, 8211g, 621cg/r, 622cg/r, 602cg/r, 603cg/r, gf360g/r laser level.
- 【large reception window & dual lcd display】- large reception window of 5cm and optical and acoustic signals help to locate the laser plane quickly and accurately. dual lcd displays for easy visual readout on both sides of the receiver. lcd backlight provides a clear look even in low light conditions. adjust the height until the horizontal datum line and the arrow disapp...
- 【long battery life and clamp holder】- the receiver comes with 2 x aa battery, providing you with about 20 working hours. there is also an automatic shut-off feature that power down the device after about 10 minutes of being idle to extend battery life. the attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.
SHOWview product
Coupon copied
