10 Best
Micro Usb For Arduinos
-
Product Highlights- Connect micro bit mainboard to pc computer.
- Black color, 1 meter.
- Bbc micro bit to usb a data sync & charging cable power supply cord.
- Micro usb cable for arduino,bbc micro bit.
- Ideal for all micro interface devices such as phone and camera charging, also for electronics kits such as arduino etc
SHOWview product -
Product Highlights
- Power via usb or external source - 5v or 7-35v (automatic selection).
- Built-in usb (and serial debugging).
- Support for the arduino ide 1.0+ (osx/win/linux).
- On-board 500ma 5v regulator.
- 6 i/o pins (2 are used for usb only if your program actively communicates over usb, otherwise you can use all 6 even if you are programming via usb).
SHOWview product -
Product Highlights
- 【atmega32u4 microcontroller】-the pro micro is similar to the pro mini except with an atmega32u4 on board. the usb type c transceiver inside the 32u4 allows us to add type c connectivity on-board and do away with bulky external type c interface.
- 【voltage regulator】-there is a voltage regulator on board so it can accept voltage up to 9v dc.the maximum voltage allowed on the raw pin is 9v, 6-7v input recommended. if you're supplying unregulated power to the board, be sure to connect to the "raw" pin on not vcc.
- 【usb usb-c port reinforced】-this is latest the usb-c port reinforced and make it more stronger solder points.
- 【multi-channels】-this tiny little board does all of the neat tricks that you're familiar with: 9 channels of 10-bit adc, 5 pwm pins,12 dios as well as hardware serial connections rx and tx. running at 16mhz and 5v, this board will remind you a lot of your other favorite arduino-compatible boards but this little guy can go just about anywhere.
- 【anti-esd package】the boards came in a box package with a pinout diagram printed on, each in their own anti-esd(electronic static discharge) bag with 3 rows of header pins.
SHOWview product -
Product Highlights
- ✅[wire guge]: 22awg; od: 3.5mm; wire length: 30cm/11.8inch.
- ✅[widely used]: use for micro usb power supply device. such for arduino, light strip, small fan, smart phone, etc.
- ✅[usage]: micro usb 2.0 female socket / male plug; red wire: positive, black wire: negative.
- ✅[high quality material]: high-quality pure copper oxygen-free wire core, smaller resistance and fast charging. rated current: 3a. rated voltage: dc 12v.
- ✅[package content]: 5 pcs micro usb male cable; 5 pcs micro usb female cable. 10 pcs connectors.
SHOWview product -
Product Highlights
- This breakout board is easy to configure, plug out, install, and access the micro usb port on the device
- Ideal for pairing with usb-enabled microcontrollers and diy usb plugs
- With the usb micro plug breakout board, you can access the micro usb port on the device
- Suitable for projects that need a micro usb port, but don't want to solder tiny components, it can meet your prototyping requirements
- You can use this project to build a usb to serial cable for the intel euclid platform using this project. requires soldering the header pins and connecting a usb-ttl cable with the correct ping configuration.
SHOWview product -
Product Highlights
- Supported by ard ide v1.0.1; 4 x 10-bit adc pins, 12 x digital i/os; rx and tx hardware serial connections.
- The pro micro board can be powered via the micro usb connection or with an external power supply.
- Atmega32u4 running at 5v/16mhz, maximum voltage on the raw pin is 9v, recommended voltage 6-7v.
- Just connect to the on-board micro-usb connector for programming. (if this module cannot be recognized by your computer, please refer to this link to install the driver
SHOWview product -
Product Highlights
- Thermal feedback automatically adjusts the charge current to limit chip temperature during high power operation or high ambient temperature conditions. the charging voltage is fixed at 4.2v, and the charging current can be externally set by a resistor.
- Current : 1a adjustable. | input voltage : 4.5v-5.5v | full charge voltage : 4.2v. | led indicator : red is charging/ blue or green indicates fully charged. | input interface: type c usb. | in-versed polarity- no.
- The hayatec module uses high quality charging chip tp4056, the external circuit is simple, good high precision charging.
- Type c micro usb input terminal with a female, can be directly input to do with the phone charger rechargeable lithium battery, and still retains the input voltage wiring pads, can be very convenient diy. he tp4056 can also be placed in shutdown mode when there is a power supply, reducing the supply current to 55ua.
- Unit dimension : l 25mm x w 19mm x h 10mm. package quantity: 5 pieces
SHOWview product -
Product Highlights
- The micro male to female usb cable with push power switch cord is suitable for usb plug led desk light use, compatitable with raspberry pi 3 / 2 / b+ / a+ / 0
- Smallest voltage/current drop, use power suppy capable of 4.95v at the amperage desired, loverpi microusb power adapter b01f1lvz0g is certified with this switch for use with single board computers
- The micro usb on off cable is a raspberry pi compatible tactile click power switch, compliant with usb 2.0. note, the micro-usb cable is charging only, no data transfer.
- 304 rocker switch on the micro-usb converter helps to prevent the usb connector from wear and tear due to frequent pulling and inserting the usb cable. made of high quality wire, no more lower-power warnings.
- Package: 1x short micro male to female push power switch extension cord (about 25cm)
SHOWview product -
Product Highlights
- Connector 1: usb micro-b female, connector 2: usb micro b male. micro usb end is usb otg pinout.
- Plug and play: with the 50cm micro usb male to micro usb female cable, you have extra room for placing your usb otg capable devices in a way that best suits your needs. you can place your thumb drive out of the way, or position devices such as your keyboard or mouse more comfortably.
- Micro usb 5pin male to female cable extension panel mount type cable with screws is ideal for charging android phones and tablets or connecting pc peripherals such as hard drives, printers, and more.
- Charge and sync:the micro usb cable can both charge and sync your android device. the micro-b cable can also be used to transfer data between your computer, printer, external hard drive, mobile phones, smartphones, mp3 players, tablets, digital cameras, and digital camcorders.
- The micro usb male to female cable works with any device equipped with a micro usb hub, including amazon kindle (kindle fire, kindle fire hdx, and kindle paperwhite), samsung galaxy smartphones and tablets, htc one and motorola droid smartphones, windows tablets, nokia, lg, hp, sony, gps devices, nexus 7 tablets, and psp game consoles ect.
SHOWview product
Coupon copied
