10 Best
Punch Set With Cases
-
-
Product Highlights
- 💯 easy to use and for any material ------ unscrew the bolt head on the top that you hammer on to cut, slide off the rubber grip, and remove the allen socket screw to allow the spring-loaded center pin to slide out. the inside of the cutter is straight while the outside is tapered. accepted thickness depends on the material – foam can be cut about 3/8-inch thick while st...
- 💯 cuts out holes easily ------ to ensure clean and precise holes on the surface, the in-built pilot tip in drive handle of the hollow hole punch set has a knurled surface that gives a firm grip for accurate positioning. the changeable hollow punch blade for wide range of application includes the following size: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 25/32", 1" and 1/-1/4".
- 💯 what you get ------ in this kit, you will get 14pcs 14 in 1 gasket hollow punch kit, including 1pcs storage case, 1pcs pin point punch shaft, and 13pcs hole punch head sizes – 3/16" (5mm), 1/4" (6mm), 5/16" (8mm), 3/8" (10mm), 7/16" (11mm), 1/2" (13mm), 5/8" (16mm), 3/4" (19mm), 7/8” (22mm), 1” (25mm), 1‐1/8” (28mm), 1‐1/4” (32mm), 1‐3/8” (35mm). this tools can meet a...
- 💯 good gasket punch kit ------ use for construction and repair. every use has been positive. clean accurate cuts. always use end grain of softwood as backing to whatever you are cutting so as not to damage the cutter edge. used on rubber, cork, hard gasket material. good value for money and nice to have around. excellent product!
- 💯 nice product for your purpose ------- the product came nicely packaged in a resealable plastic case. high quality hollow punch kit comes with a plastic case that has a handle allowing for easy accessibility and is portable for on the go jobs. clean and tidy, save space.
SHOWview product -
Product Highlights
- Prick punches provide a sharper point for more precise placement, while center punches
- Made of steel
- Precision centred tips for accuracy
- Set of five punches includes three prick punches with 5/64", 1/8", and 5/32" diameter tapered points and two center punches with 1/16" and 3/32" diameter tapered points
- Knurled grip for secure holding
- Hardened and tempered
SHOWview product -
Product Highlights
- ➤➤【automatic center punch】-- the center punch delivers an automatic,high-impact,spring-loaded strike through adjusting the cap; its brass body has a deeply knurled surface for nonslip control.
- ➤➤【application:】perfect for home repairs and light jobs such as drilling holes in plastic, aluminum, copper, iron sheet and many other types of sheet metal (excluding steel or any other harder metal
- ➤➤【high quality material】-- this step drill set made of high speed steel along with titanium coating ensures outstanding durability and sharpness,can reduces the friction,runs cooler.
- ➤➤【product feature】-- step drills are indicated in sizes. these sizes determine the diameters and the number of steps. assortment comes with 5 drill bits of a combined 50-step sizes added：6-step drill（3/16" to 1/2"），9-step drill（1/4" to 3/4"），10-step drill（1/4" to 1-3/8"），12-step drill（3/16" to 7/8"），13-step drill（1/8" to 1/2"）
- ➤➤【what you get:】includes five standard step drill bits with center punch,which can replace 50 individual drill bits, you can process 50 different kinds of diameter holes with the five pieces.
SHOWview product -
Product Highlights
- Multi-applicable hand set: gunpla handheld chisels and punches are the key tools for removing bushings and pins. they are also great for cutting or splitting steel objects. the versatile set with various pieces, types, shapes, designs and specific functions for these tools. create holes, or forming an indentation, impression of the tip on a workpiece
- Metric and imperial professional set: the set includes 3pcs center punches: 6mm (1/4”), 8mm (5/16”), 2mm (3/32”); 3pcs flat chisels: 10mm (3/8”), 12mm (1/2”), 16mm (5/8”); 6pcs pin punches: 8mm (5/16”), 6mm (1/4”), 5mm (3/16”), 4mm (5/32”), 3mm (1/8”), and 1.5mm (1/16”)
- Chrome vanadium tools: these high quality punches and chisels set of tools is made of chrome vanadium material. the still punch working tools are heat treated, hardened 50-52 hrc and possess high strength, toughness, and is resistant to wear. chrome vanadium chisel and punch are always the utmost choice for tools as they do not get rust over the years
- Affordable chisels and punches: as pieces of metal rods essentially used for drilling holes into workpieces, the punches are often used on thin sheet or other flat material for quick effect. the chisels are good cutting tools with sharpened edges at the end of a metal blade for driving with a mallet or hammer for dressing, shaping, or working a solid or soft material as...
- Pocket size storage pouch: comes along in a perfectly sized storage pouch that is easily inserted into any pocket. the sizes are printed on the pouch face to quickly identify or store after use. this set does not require any preparation to be taken to the next job on site or at owned workshop
SHOWview product -
Product Highlights
- The pin punch set is heat treatment to provide hardness of up to 48-52 hrc.
- The set come packed in a folding metal storage metal box
- The pin punch set is made of high quality chrome-vanadium steel.
- The pin punches are electroplate treated to provided a mirrored finish
- Quality and high precision to within 0.01mm
SHOWview product -
Product Highlights
- Precise gasket maker: precisely machined and heat-treated blade hollow puncher with alloy steel construction resists corrosion and keeps blade sharp to provide excellent cutting performance
- Large hole punch: alternating carpet hole punch, hollow punch blade for wide range of application includes the following sizes: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 25/32", 1" and 1/-1/4" hollow hole punches.
- Hole punch tool set: built-in center punch/pilot tip in drive handle features a textured knurled surface to support a firm grip for easy and accurate positioning to execute clean cuts and holes.
- Leather punch set: multi-applicable gasket cutter and is most ideal on vinyl, leather, plastic, rubber, copper, soft material, gaskets, cardboard, and many more materials.
- Storage case: high quality hollow power punch kit comes with a plastic case that has a handle allowing for easy accessibility and is portable for on the go jobs.
SHOWview product -
Product Highlights
-
2. punch handle included and sizes are: 3/16"(5mm), 1/4"(6mm), 5/16"(8mm), 3/8"(10mm), 7/16"(11mm), 1/2" (13mm), 5/8"(16mm), 3/4"(19mm), 7/8"(22mm), 1"(25mm),1-1/8"(28mm), 1-1/4"(32mm), 1-3/8"(35mm).
-
4. safely cut holes on leather belts, watches bands, plastics, paper, gasket and foam etc.
-
1. made of hardened carbon steel, high durability, strength and efficiency.
-
3. unique locking system allows for quick and easy replacement of cutting heads.
-
5. supplied in a bmc storage box.
SHOWview product -
2. punch handle included and sizes are: 3/16"(5mm), 1/4"(6mm), 5/16"(8mm), 3/8"(10mm), 7/16"(11mm), 1/2" (13mm), 5/8"(16mm), 3/4"(19mm), 7/8"(22mm), 1"(25mm),1-1/8"(28mm), 1-1/4"(32mm), 1-3/8"(35mm).
-
Product Highlights
- Punch handle included and sizes are: 3/16"(5mm), 1/4"(6mm), 5/16"(8mm), 3/8"(10mm), 1/2"(12.5mm), 5/8"(16mm), 25/32"(20mm), 1"(25mm), 1-1/4"(32mm).
- Supplied in a bmc box.
- Made of hardened carbon steel, high durability, strength and efficiency.
- Safely cut holes on leather belts, watches bands, plastics, paper, gasket and foam etc.
- Suitable for falconry, hobbies, crafts, modeling, home repair etc.
SHOWview product -
Product Highlights
- 🔧【automatic center punch 】: the automatic center punch provide an automatic, high-impact, spring-loaded strike to the cap; its brass body has a deep and knurled surface for nonslip control. the protective aluminum case can provide convenient storage and carrying.
- ✔【hss & titanium coating】: high speed steel makes the step drill set more durable, titanium coating ensure to easily cut through steel sheets , aluminum sheets, copper & plastic & wood board and many other types of sheet metal.
- 📦【what you get】: 1 x aluminum case, 1 x 4-12mm, 1 x 3-13mm, 1 x 3-19mm, 1 x 5-22mm, 8-35mm step drills, 1 x automatic center punch and 1 x twist drill bit.
- 🔧【double cutting blades & three-sided shank】: double cutting blades and x-type opening design ensure a faster and smoother cutting; the 3-sided shank design can prevent drill chuck sliping; with the smaller pressure, the sets can cut through the wood, sheet metal, steel and other surfaces.
- ✔【time saver】: covering assorted step sizes helps to drill or enlarge different holes in one bit without changing bit constantly.the size is laser etched into the metal, so it can be accurately drilled and will not wear even if it is used for a long time.
SHOWview product
Coupon copied
