7 Best
Rc Chargers
-
Product Highlights- [fast charge]: ac input voltage: 100v - 240v max. charging current: 3 x 800ma. charging time is only 1-5 hours. the specific charging time depends on your battery capacity.
- [package content]: 1 pcs b3 lipo charger; 1 pcs power cable. case packaging keeps the charger safe in transit, allowing you to receive a brand new undamaged lipo charger.
- [compatible with]: there are two battery ports built into the charger. the 3 pin port is suitable for 7.4v lithium battery. the 4 pin port is suitable for 11.1v lithium battery. ideal for 7.4v 11.1v 2s - 3s lithium batteries. charge two kinds of lithium batteries with different voltages at the same time, both of which are independent ports, and the charging does not aff...
- [product features]: built-in independent lithium battery balancer that ensures that each cell is fully charged and protected to maximize battery life and performance. lipo battery balancer with over current protection, over temperature protection, short circuit protection and over voltage protection.
- [led indicator]: when you connect the charger to the 7.4v lithium battery, coll1 coll2 starts to light up red, and the 7.4v lithium battery is being charged. when you connect the 11.1v lithium battery, coll1 coll2 coll3 starts to light red, and the 11.1v lithium battery is charging. when the lithium battery is fully charged, the led indicator will be in a steady green s...
SHOWview product -
-
-
-
Product Highlights
- ⚡【smart charging】 use advanced and accurate -δv detection technology to judge whether the battery is full, stop charging in time. through the trickle charge to ensure that the battery is fully full without overcharging, improve the battery life.
- ⚡【stable & reliable】 the intelligent nimh/nicd battery charger can automatically determine the number of batteries and automatically adjust the output voltage. accurate constant current control allows the current to vary by less than 5% and keeps the battery in a healthy state of charge. this charger features ce certification.
- ⚡【wide battery type compatability】 input ac100-240v, output 500-800ma. applicable to 2.4-12v nimh nicd battery packs(2-10s) for rc cars,rc boats,rc aircraft, airsoft and other remote control toys. 6 common battery connectors: standard tamiya, mini tamiya, jst, sm 2p, xh, futaba.
- ⚡【comprehensive protection】 the built-in smart chip provides a comprehensive protection for the battery and charger: temperature protection (for battery packs with temperature-sensitive resistors), short-circuit protection, reverse polarity protection, and overcharging protection.
- ⚡【easy to use & portable】 select the correct connector to connect the battery pack to the charger, then plug the charger into a power outlet to easily and safely charge your battery pack. two-color indicator light, red indicates charging, blue indicates charging is complete. small and light, portable and easy to store, it is ideal for home and travel.
SHOWview product -
Product Highlights
- 【input and ouput】 ac input voltage:100-240v. output power：20w, charging current: 1a/2a. the charging current can be set to 1a or 2a through the switch on the side of the charger according to the capacity of your battery.
- 【two-color indicator】steady red light indicates that charging is in progress, steady green light indicates that charging is completed, red and green flash alternately indicates that the battery is not connected.
- 【smart nimh charger】this n8 htrc charger is professionally designed for 2-8s nimh/nicd battery(2.4-9.6v) of drone, airsoft, rc car, rc boat, etc. the inner chip uses advanced and accurate -δv detection technology to judge whether the battery is full and avoid over-charging. through the trickle charge to ensure that the battery is fully full, improve the battery life.
- 【easy to use】the charger comes with standard tamiya connector and 3 additional charging cables (standard tamiya to mini tamiya cable *2, standard tamiya to crocodile clip cable). compact and elegant design, easy to carry and suitable for travel.
- 【note】this charger is suitable for nimh / nicd batteries with standard or mini tamiya connector. alligator clips can for diy. the positive pin (red wire) of the mini tamiya connector is round and the negative pin (black wire) is square. please do not charge when left unattended. it uses fireproof enclosure, which is safe and reliable.
SHOWview product -
Coupon copied
