10 Best
Roller Grain Mills
-
Product Highlights- Real ball bearings for rollers instead of brass bushings.
- More accurate and easily readable roller gap measurement in both mm and inches.
- Materials: ss 304 stainless steel for the two rollers. 6061 alloy for the mill body and hopper.
- Adjustable rollers at both ends to give uniform crush. adjustable range: 0.025 - 0.1"
- This mill is designed for barley, wheat malt and un-malted wheat, not suitable to mill corn and rye.
SHOWview product -
Product Highlights
- 【efficient electric drill mode】the malt mill can crush malts with a 3/8 inch electric drill or crank handle. it is recommended to use an electric drill with a low speed of 200-300 rpm, and you can grind perfect grains and increase the efficiency by 85%. the grain crusher is suitable for grinding large quantities of grains. save time and effort.
- 【large capacity hopper】the hopper of manual grain mill can hold approximately 7 lb of grain. with a large hopper, you can load your grain bill before you start milling. there is no need to frequently add grain to the hopper. the hopper is made of aluminum, which is thicker and stronger for long-time use.
- 【perfect grinding result】the brewing malt mill can crush the grains while leaving the grain hull intact. the roller gap of hand grain mill can be adjusted between 0.025-0.1 to get the proper grain fineness. the recommended distance is 0.05 inch. very suitable for grinding wheat, malt, barley, and other wine brewing grains. not for large grains such as corn and soybeans.
- 【stainless steel rollers】2 rollers of barley crusher are made of stainless steel, heavy duty, and no need to worry about roller rust. the strong rollers can withstand a lot of continuous grinding and repetitive use. having bearings instead of bushings means it will last for a very long time. the high friction on the roller can crush and peel the grains well.
- 【solid and thick metal base】the base is made of aluminum, heavy duty, solid, and not easy to break. you can put the installed malt mill directly on the buckets without making the base yourself. fit for standard 5 and 6.5 gallon buckets. 【life time service & 2-year *************************************************************】now, we have done a more rigorous and compreh...
SHOWview product -
-
Product Highlights
- Grains from the top fixed gap are fed to the adjustable gap between the main driving roller and the bottom third roller. the gears are covered to keep them clean. the grain mill comes with one large hopper of 6kg capacity, one silicon rim for hopper, one crank handle, and one finger guard.
- The first crush slightly flattens the grain, and gets it ready for the next crush, which breaks apart the grains and loosens the starch with minimal husk damage. this mill is designed for barley, wheat malt and un-malted wheat, but not suitable to mill corn and rye.
- This premium grain mill is featured with three superior grade of steel (ss304) rollers. one of top two rollers is spun by the drive shaft, and it drives the other top roller through a set of two alloy steel gears.
- The three rollers are made of premium stainless steel 304, of 1.5" (37.8mm) diameter. grains are crushed twice, i.e. start with a preliminary crush through the fixed gap (0.068", 1.71mm) between the top two rollers, and end with a pass through the adjustable gap (0.025"-0.1", 0.64-2.54mm) between the driving roller and the bottom idler roller.
- Large hopper capacity: 13lb(6kg)
SHOWview product -
Product Highlights
- 【adjustable roller design】it is provided with adjustable 2 rollers which can be crushed cereal well and peeled shell off perfectly, so as to be good for brewing beer in future. the 2 rollers design has the main advantage that it draws the grain better and gives improved throughput.
- 【high capacity】the hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on oil-impregnated bronze bushings. the drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible.
- 【high quality】this grain mill is constructed using materials that will last a lifetime. cold rolled steel for the rollers, and aluminum for body and stainless steel hopper and oil impregnated brass bushings. the grain mill is professional in grinding barley, wheat and other cereals. perfect for large batches and high efficiency milling.
- 【better grind】with two rollers, all your grain will be crushed twice in one cycle. the crush is through the fixed gap between the top two rollers. the initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.
- 【use conveniently】a hand crank is included, but the mill can be easily motorized with a corded electric drill. you don't need any additional attachments, just stick the drill on and go. stainless knurled knobs allow a gap spacing adjustment range of 0.070". adjusting is simple, just loosen the adjustment screws, adjust the gap and tighten the adjustment screws.
SHOWview product -
Product Highlights
- This grain mill is made of materials that will last a lifetime. cold-rolled steel for the rollers and aluminium for body and stainless steel funnels as well as oil-impregnated brass bushings. the grain mill is professional in grinding barley, wheat and other grains. it is equipped with adjustable 2 rollers that can crush the grain well and peel off the bowl perfectly to...
- The funnel can hold up to 30 kg of grains, and the roller body has a block frame made of aluminium, in which three steel rollers are stored on oil-impregnated bronze bushings. the drive shaft and all axles are integrated into the roller, allowing for clockwise or counterclockwise drive. a hand crank is included, but the mill can be easily motorised with a corded electri...
-
the mill can be cranked by hand or motorised with a wired electric drill.
you need to supply or build a base.
- This equipment is perfect for large batches and highly efficient milling. with two rollers, your entire grain is crushed twice in one cycle. the crushing is done by the fixed gap between the two upper rollers. the first pass smooths the grain lightly and prepares it for the next crush that breaks the grains and releases the strength with minimal shell damage.
- Rust-proof knurled buttons allow an adjustment range for the gap distance of 0.070 inches. adjustment is simple - simply loosen the adjustment screws, adjust the gap and tighten the adjustment screws.
SHOWview product -
Product Highlights
- Adjustable roller gap rollers gap distance is adjustable from 0.025 to 0.1 inches, adjust the rollers gap according to the density of the grain, makes grinding malted and unmalted grains a breeze
- 2 grinding mode works well with the handle crank and low speed electric drill, freely switch between manual crank and electric drill mode, the end of the drive shaft where the handle(or power drill)attaches takes an 8mm hex socket, this stainless grain mill makes your homebrew easier
- Rugged bearing rollers 2 rollers are 304 stainless steel, this mill uses bearings for the 2 rollers, bearings rollers will last much longer than bushings rollers, excellent material, you can use this malt crusher for life
- High capacity&high efficiency large grain hopper can hold 7lb at one time, is easily under 10 minutes to run all the grain through twice, this crusher improves work efficiency and saves your time efficiently
SHOWview product -
Product Highlights
- Fully adjustable roller gap from 0.025” all the way to 0.1”, allowing you to finely tune the crush to your extract preference.
- Other features include a 7lb capacity grain hopper, sealed roller bearings (not bushings), and an ergonomic comfort-grip crank handle.
- Perfectly milled grains, ease of use and superior dependability. look no further than the hullwrecker grain mill.
- Includes a custom-designed all metal base that fits perfectly on any standard 5 or 6.5 gallon bucket. other grain mills expect you to provide your own base.
- Hullwrecker can also be driven by an electric drill.
SHOWview product
Coupon copied
