10 Best
Solder For Speaker Wires
-
Product Highlights- 【environmentally safe solder wire】soldering wire electronics is made of high quality materials which are free from impurities, safe and reliable, and can be used for a long time. the welding wire has less spatter of smoke and rosin when welding. after cooling, the surface is shiny and the solder joints look great.
- 【solder wire very cheap】using solder from the roll is much cheaper for you than buying it in small containers. also, you don't need to buy extra flux or rosin with the kit because the inside of this tin is already filled with it.
- 【4 rolls of soldering wire】our rosin core solder tin wire set contains 4 rolls of 50g rosin wire (solder 0.6mm，solder 0.8mm，solder 1mm), which can meet your different soldering needs and be used for a long time.the soldering wire is made of high quality electrolytic tin with built-in flux, which makes soldering easier.
- 【plumbing solder fine workmanship】content of the rosin core welding wire is 2%, it is evenly distributed in the wire, has good continuity, does not break easily and is neatly rolled.flows well and heats up evenly, it is easy to use. the melting point of the wire to be welded is 227 ℃.
- 【 wide application pallette】solder rosin core tin wire on a convenient detachable spool can be used for many repairs. even if you are not a professional electronics engineer working in service, it will be useful for: permanently soldering electrical wires or cables, repairing children's toys, headphones, tvs, speakers, microphones, motherboards,etc.
SHOWview product -
Product Highlights
- Wide application - the 4mm banana plug holds a wide range of speaker wire gauges easily and securely from 0.75mm ～ 4mm(18～12 awg). perfect choice for av amp / speaker sockets /receiver and other sound systems.
- Easy to install - just strip the wire, put the wire in the plug, tighten down screw, then place the cover over the plug and you will finish the termination work.
- Premium metal material – vcelink speaker plug is made of refined copper in gold-plated, which makes for a very good, non-corroding connection and helps the flow of signals, bringing you lossless sound quality. the aluminum shell makes it double anti-interference, anti-oxidation, and wear-resistant and prolongs service life.
- Secure connection - the two screws in the barrel provide a very secure installation for speaker cable and screw fitted cable means there is no soldering required. black and red outlooks avoid confusion when connecting.
- What will you get - 4 pairs/ 8 pieces 4mm banana plug (4 red+ 4 black), 18 months warranty for quality problem and invoice including vat service.
SHOWview product -
-
Product Highlights
- Color: red, black, yellow, blue, green; rated current: 10a; binding post socket diameter: 2mm / 0.08"; width/outer diameter: 6mm / 0.24"; length: 26mm / 1.02"; bore diameter: 3.5mm / 0.14".
- Easy to install, you can connect to the installed accessories with a melting method.
- The banana plug is commonly installed at both ends of a speaker wire for insertion into a banana socket. widely used for cinema, home theater, concert, ktv, audio-video receivers, amplifiers, and other sound systems.
- The banana connector is made of copper material and gold-plated on the outside, and the shell is made of pvc. this item is durable, safe, reliable, and can effectively prevent corrosion.
- Please keep it clean when using banana plugs, and pay attention to moisture-proof to avoid insulation damage and leakage or short circuit.
SHOWview product -
Product Highlights
- Color: red; rated current: 10a; binding post socket diameter: 2mm / 0.08"; width/outer diameter: 6mm / 0.24"; length: 26mm / 1.02"; bore diameter: 3.5mm / 0.14".
- Easy to install, you can connect to the installed accessories with a melting method.
- The banana plug is commonly installed at both ends of a speaker wire for insertion into a banana socket. widely used for cinema, home theater, concert, ktv, audio-video receivers, amplifiers, and other sound systems.
- The banana connector is made of copper material and gold-plated on the outside, and the shell is made of pvc. this item is durable, safe, reliable, and can effectively prevent corrosion.
- Please keep it clean when using banana plugs, and pay attention to moisture-proof to avoid insulation damage and leakage or short circuit.
SHOWview product -
-
Product Highlights
- Easy to use: solder and hot melt adhesive have good tensile and tear strength. helping to hold up to moisture, prevent wires from corrosion and avoid shrink tubing melting before soldering ring. after heating and cooling, the wires will not slip out of the heat shrink terminal.
- Wide applications: the heat shrinkable sleeve can be used in household appliances, vehicles, ships, planes, railroad, watercraft, aerospace, electrical power, electronics industry, and other scenes. transparent tubes can also help us in internal control.
- Premium material: the heat shrink lug has polyolefin tube outside, anti-corrosion tin ring and waterproof hot melt glue inside. the double-walled design provides good insulation and water resistance on the exterior, leaving internal conductivity unchanged.
- Practical design: the fusible inner adhesive layer between the insulation and the cable provides an optimal seal for a watertight connection. it is recommended to cover both ends with a heat shield when heating the solder to prevent the solder from burning before melting.
- Package includes: you will receive a total of 260 pcs solder connectors heat shrink, which can be used anywhere a wired connection is required, please note that the red tube is the heat shrink tube assembly, not waterproof..
SHOWview product -
Product Highlights
- Fit for confined and narrow spaces - can be bent after connection and no need to crimp or solder in the confined area, just control the temperature via a heat gun.
- High temperature proof in a short time: use exclusive material in the butt connectors to avoid shrink tubing melting before solder ring.
- Time saver - solderless, crimpless, all you need is just a heat gun to finish the joint, much faster and easier than the old way.
- Better waterproof and seal performance - there is two hot melt waterproof adhesive rings in each butt connector, which help it hold up better to moisture.
- Iatf16949:2016 listed: the kuject solder seal connectors meet the newest standard of international automotive task force, which is the most standardized way for you to repair or modify your car.
SHOWview product -
Product Highlights
- 【easy to use & money, time saved】 no wire-stripping required. no need to peel the wire or break the wire jacket, innovative lock flap style, just insert wires and squeeze to make fast, secure connections. a few minutes to connect anything, the most convenient wire connectors to save your time and money.
- 【safety】 free from electric shocking danger, slightly waterproof and dustproof, fireproof and heat resistant, reusable.
- 【rock solid connection performance】 our solderless low-voltage electronic wire connector is innovative clasp connection design, peeling free, tighter to solve. the problem of loosing that most wire connectors have. compatible with 18/20/22/24 awg cable. please note: as for 18 gauge wire, not all 18 awg wires are with the exact same diameter in the market. you may be abl...
- 【low-voltage t tap】 two way wire connector 2 pin is a great ideal for any low voltage equipment such as led / vehicle /audio / video / lighting / auto installation and other electrical wiring.
- 【working voltage】 12v, 24v dc, 300v ac. working current: 0-10a,working temperature:- 30 °c ~ + 85 °c.
SHOWview product -
Product Highlights
- 【good welding performance】the melting point of tin wire is 217℃-222℃, it has fast melting speed, low smoke, odorless and less spatter. the solder wire has good fluidity, the rosin core is evenly distributed in the solder wire, and melts evenly during the heating process. there is little residue after welding, and the solder joints are firm and bright.
- 【wide application】our lead-free solder is particularly suitable for the repair of electronic components such as circuit boards, televisions, computers, radios and other home appliances, diy projects, industrial equipment and other electronic equipment.
- 【high quality material】our solder wire is made of 63% sn and 37% pb, the wire has good corrosion resistance. the flux material is rosin with a content of 2.0%, which has excellent electrical and thermal conductivity.
- 【roll design】the tin wire is evenly rolled into a roll, and when you solder things, you can use it as a filler to supplement the surface and gaps of electronic devices. using a solder wire coil, welding can be completed quickly and the welding efficiency is improved.
- 【sufficient quantity】 the package contains 4 rolls of solder wire, each roll is 50g. there are three tin wire diameters: 0.6mm/0.8mm/1.0mm. sufficient quantity and different direct tin wires can meet your different welding needs, very suitable for home welders.
SHOWview product
Coupon copied
