10 Best
Soldering Wicks
-
Product Highlights- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small pcb boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Low residue design: no-clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Quality materials：the braided desoldering wicks are made of 100% copper wires with a fine braid design. using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; and the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Warranty ：if you have any questions, please feel free to contact us at any time. thank you!
SHOWview product -
Product Highlights
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small pcb boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Low residue design: no-clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Quality materials：the braided desoldering wicks are made of 100% copper wires with a fine braid design. using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; and the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Warranty ：if you have any questions, please feel free to contact us at any time. thank you!
SHOWview product -
Product Highlights
- No clean rohs compliant solder wick-shinenow sn-2030 solder wick left very few residues and if there is any it is pcb safe,rohs approved,no need to clean.
- High efficiency-flux wovend desoldering braid provides much better solder absorbtion,it responds faster than traditional ones
- High quality material-to ensure the quality,shinenow solder wick is made of high purity and oxide free copper,it provides good thermal conductivity and better solder absorbtion
- Economical desoldering braid-our desolder wick is as long as 10 feet, twice the length of normal 1.5m solder wicks and 2.0mm length is the most popular size,it is economical and very useful.
- Easy to use-when you need to remove extra solder from your pcb,just put it over the spot and heat the solder wick until the solder is absorbed,then remove the wick and repeat it if necessary
SHOWview product -
Product Highlights
- High purity oxygen and oil free copper wire: non corrosive ultra high purity type r rosin flux. halogen free.
- Excellent wetting compatibility: most of the sellers do not have repair experience but they sell mobile phone / laptop spare parts, tools, soldering fluxes.
- Fast and safe desoldering: braid for removing solder from leaded and lead-free components. we use the same brand in our repair center.
- Same product we use in our service centre
- Available width: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm
SHOWview product -
Product Highlights
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; please check the size carefully before purchasing
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the pcb board copper foil or ic pin; the solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; the liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small pcb board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
SHOWview product -
Product Highlights
- Static free bobbins
- Manufactured under spc guidelines
- Nsf - nonfood compounds program listed p1, nsf registration #144208
- Oxide-free clean copper
- Only pure type 'rma' rosin is used meeting the requirements of mil-f-14256f (ansi/j-std-0004)
- Designed to leave a residue that is environmentally safe
SHOWview product -
Product Highlights
- 【pure copper desoldering wire】: anti-oxidation, corrosion resistance, clean tin absorption, less residue.
- 【use of desoldering pad】: when disassembling or repairing electronic products, such as computer motherboards, circuit boards, mobile phone boards, absorb the solder on the circuit boards.
- 【6 sizes】: length: 1.5m, width: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm one for each size.
- 【multi-strand copper braid】: the heat transfer of the braided desoldering cable is better, which speeds up the speed of desoldering.
- 【tools for electronic products】: the tin strip can greatly reduce the repair time of electronic products and greatly reduce the risk of thermal damage to the circuit board.
SHOWview product -
Product Highlights
- Quality material: solder braid wire is made of premium copper wire, oxidation and corrosion resistance, excellent thermal conductivity and tin absorption.
- No-clean design: tin remover desoldering wick is effective in removing and absorbing solder, and leaves almost no residue after use, no need to clean, convenient and fast.
- Prevent short circuit: desoldering wire can absorb the tin stuck on the pins to ensure that there is no short circuit between the pins. it can also be used to clean the pads of bga components.
- Flat knitting: fast heat conduction, suitable for fast tin absorption to reduce the risk of thermal damage to the circuit board.
- Different sizes: you will get 7 pieces solder remover wicks, including 1.0/1.5/2.0/2.5/3.0/3.5 mm, meets your different desoldering requirements. suitable for desoldering of printed circuit boards, computer motherboards, cell phone boards, etc.
SHOWview product -
Product Highlights
- 【desoldering wick with copper braid】 2pcs solder braid with the size 2.5mm width, 1.5m length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- 【3-in-1 solder removal tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- 【one-handed desoldering sucker with powerful suction 】 whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
- 【abs body with non-slip sponge and nylon nozzle desoldering pump】 the body of the desoldering vacuum pump is made of high quality abs, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 【widely used solder remover】 the desoldering wick desoldering pump can be used to correct mistakes with small boards on pcbs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
SHOWview product -
Product Highlights
- ✅[usage]: work the wick from the tip, and once the wick and solder are heated, the solder braid quickly absorbs the melted solder, leaving a clean work area.
- ✅[widely applictions]: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small pcb boards, bringing lots of convenience for your work.
- ✅[various size]: 7 rolls of desoldering braid wire with a length of 1.5m. the width of each roll of desoldering braid wire is different, they are: cp-1015 (width 1 mm), cp-1515 (width 1.5 mm), cp-2015 (width 2 mm), cp-2515 ( width 2.5 mm), cp-3015 (width 3 mm), cp-3515 (width 3.5 mm), cp-4015 (width 4 mm).
- ✅[material]: desoldering strand desoldering wire adopts multi-strand copper mesh, and the precise geometric weaving process ensures maximum surface tension and desolderability, so that the solder is clean and free of residues. pure copper material, anti-oxidation and corrosion resistance, good thermal conductivity.
- ✅[package content]: 7 pcs desoldering braid wire (one of each size).
SHOWview product
Coupon copied
