8 Best
Spiral Point Taps
-
Product Highlights- Wide applications: suitable for processing through-hole threads. for tapping aluminum, die steel, stainless steel, bronze, plastics. recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. the torque caused by too fast feed speed is too large, which can easily cause the tap to break.
- Easy to use: used on drilling and tapping machines, cnc and milling machines. use with tapping oil to get higher quality threads and more durable taps. machine taps are suggested to be used with tap collets with overload protection.
- Spiral flute taps: thread size: m10 x 1.5 + 0.03; square end size: 6mm / 0.24". spiral point design, downward chip removal, fast tapping with accuracy. titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction.
- Special design: enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. according to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. it has high hardness and toughness, wear resistance, heat resistance.
- Tips: prone to chipping or breaking due to speed overload or non-vertical tapping. use the correct tapping tools, such as tap wrench, tapping machine. micro taps(such as m1-m3.5) are mainly used in clocks and watches, tapping wood and soft metals with lower hardness.
SHOWview product -
Product Highlights
- Material and finish: cobalt high speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. titanium plating for wear resistance, corrosion resistance, rust protection and long service life.
- How to use: suitable for drill presses, tapping machines, cnc and milling machines. used with tapping oil to get higher quality threads and more durable taps.
- Tap size: m6 x 1 thread, h2 thread tolerance grade, right hand thread cutting, fast tapping with accuracy. straight flutes spiral point tap are ground to provide downward chip removal.
- Applications: great for through-hole threads. can be used for drilling and tapping stainless steel (below 30hrc), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
- Tips: machine taps are suggested to be used with tap chucks with overload protection. it is not recommended for hand use and electric drill tapping.
SHOWview product -
Product Highlights
- Premium high speed steel thread taps with nitriding coated, greatly improved surface hardness, abrasion, and corrosion resistance.
- Screw thread tap drill bit set can be used with hand tap wrenches, drill presses, tapping machines, cnc and milling machines, handy for fast and precision tapping.
- Countersink thread taps with 7 different thread diameters: m3*0.5; m4*0.7; m5*0.8; m6*1.0; m8*1.25; m10*1.5; m12*1.75
- Spiral pointed tap, quick down-ward chip removal and smooth tapping experience for through holes, great for cutting new threads or repairing damaged threads.
- Threading tapping tool, complete hole drilling, tapping, deburring and countersinking on different materials such as aluminum alloy plates, copper plates, iron, general steel and so on.
SHOWview product -
Product Highlights
- Material & finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (hrc62-64), wear resistance, and good toughness. ticn coating for improving wear resistance, hardness, heat resistance, lubricity.
- How to use: suitable for drill presses, tapping machines, cnc and milling machines. used with tapping oil to get higher quality threads and more durable taps. the point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Spiral point tap: m10 x 1.5 thread with h2 tolerance, jis standard, right hand thread cutting. straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Applications: thread taps are great for through-hole threads. can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. flutes on the screw tap help to remove chips and debris from the hole.
- Warm tips: machine taps are suggested to be used with tap chucks with overload protection. it is not recommended for hand use and electric drill tapping. micro taps (such as m1-m3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
SHOWview product -
Product Highlights
- Size: m3*0.5, m4*0.7, m5*0.8, m6*1.0, m8*1.25, m10*1.5, m12*1.75, standard coarse thread.
- Chips are expelled downwards when machining threads, great for through-hole and deep threading.
- Spiral point tap sets are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
- Screw-point taps with straight flute design, fast cutting speed, clear threads with no burrs.
- Straight fluted tap are suitable for create screw threads on wood, plastic, aluminum or many other soft materials.
SHOWview product -
Product Highlights
- Material & finish: 6542 (m2) high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (hrc62-64), wear resistance, and good toughness. titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Machine tap: suitable for drill presses, tapping machines, cnc and milling machines. used with tapping oil to get higher quality threads and more durable taps. the point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Metric spiral point taps: thread size: m2 x 0.4, m2.5 x 0.45, m3x0.5, m3.5 x 0.5, m4 x 0.7, m5 x 0.8, m6 x 1.0; plug chamfer and right hand thread cutting. straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Applications: thread taps are great for through-hole threads. can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. flutes on the screw tap help to remove chips and debris from the hole.
- Tips: machine taps are suggested to be used with tap chucks with overload protection. it is not recommended for hand use and electric drill tapping. drill the holes with a twist drill bit first, then tap with a thread tap. micro taps (such as m1-m3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
SHOWview product -
Product Highlights
- Made from high speed steel 6542 with titanium coating for high wear and durable , 9 different sizes: m2, m2.5, m3, m4, m5, m6, m8, m10, m12.
- Spiral tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
- Designed to cut threads for standard-sized screws, perfect for cutting and renewing external and internal threads to exact standards.
- Self-centering point, no need for assistant center drilling or center punching. clear and tidy, no burr, provide rapid chip removal for efficient threading.
- Suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (not hss4241 material)
SHOWview product -
Product Highlights
- Material - spiral point taps is made from m35 high speed steel with 5% cobalt, which increases hardness, strength, and heat resistance, allowing for efficient and reliable cutting performance. the hardness of hss m35 after heat treatment is higher than hss 6542 (m2). the titanium nitride (tin) coating provides increased hardness, wear resistance, and lubricity, which ex...
- Application - metric spiral tip tap drill bits are perfect for through-hole applications, cutting continuously curled materials, holes with axial grooves in the inner wall, and high-speed machining for metals (aluminum, brass, copper, stainless steel, steel, etc.) to create precise and durable internal threads in metalworking industries and applications, ensuring accura...
- Size - thread size: m3 x 0.5 / m4 x 0.7 / m5 x 0.8 / m6 x 1 / m8 x 1.25 ; thread length: 13mm (0.51") / 15mm (0.59") / 19mm (0.75") / 23mm (0.91") / 23mm (0.91") ; total length: 50mm (1.97") / 56mm (2.2") / 62mm (2.44") / 71mm (2.8") / 71mm (2.8") ; shank side width: 2.5mm (0.1") / 3mm (0.12") / 4mm (0.16") / 4.8mm (0.19") / 5mm (0.2")
- Feature - spiral point taps shoot the chips cut by the angular cutting edge forward and allow effective chip evacuation without chip clogging and produce clean threads. the 3 flute design with high flexural strength is the most efficient and cost-effective when tapping a through hole.
- Package content - 1pcs x spiral point tap m3 x 0.5 + 1pcs x spiral point tap m4 x 0.7 + 1pcs x spiral point tap m5 x 0.8 + 1pcs x spiral point tap m6 x 1 + 1pcs x spiral point tap m8 x 1.25
SHOWview product
Coupon copied
