10 Best
Zwave Range Extenders
-
-
-
-
Product Highlights
- 3 year+ battery life powered by 1 x 1/2 aa battery. optimised to use up to 66% less battery power to communicate than previous generations.
- Zwave window sensor 7 is powered by the speed enhancements that come from z-wave plus and z-wave s2 enabling it to wireless communicate 50% faster and up to 67% further in real-world use
- Smallest 3-in-1 zwave door sensor window sensor. multisensors include magnetic contact, dry contact relay, and a tilt sensor. the tilt detection must be in operation with the magnet sensor in its description.40% smaller than previous generation at only 2.8”x0.75”x0.7” (main body)
- With a smartstart enabled gateway, you can connect it to your zwave hub by simply scanning its qr code. from there, stick it to your door and door / window sensor 7 is ready to power your home and protect it
- Compatible with samsung smartthings, vera, zipabox, homeseer, ring, open z-wave, nexia, domoticz and more. z-wave certification number:zc12-20060075
SHOWview product -
Product Highlights
- Super small; invisibly installs behind your existing wall switch or power socket. measures only 1.58 x 1.69 x 0.76 inches.
- Compatible with certified z-wave gateways including samsung smartthings, vera, clare controls, open z-wave, qolsys iq panel, zipabox. can be controlled via 2-state (flip/flop) external/manual switch, momentary push button or the 3-way switch.
- Convert any two switches or outlets into z-wave connected ones for wireless control and automation. existing wall switches or power outlets continue to operate as normal.
- Records electricity use in real-time and reports it to z-wave gateway with up to 99% accuracy.
- Z-wave plus certified for quicker response time and best wireless range. certification number: zc10-17035485.
SHOWview product -
Product Highlights
- Product 1: power metering
- Product 1: dimmable led lamps. power consumption is lesser than 0.8w
- Product 2: reduces the minimum load required by fibaro dimmer 2
- Product 2: great design
- Product 1: works with led lamps
- Product 1: acts as a z-wave range extender. compatible with any z-wave or z-wave+ controller.
SHOWview product -
-
Product Highlights
- Easier device setup than standard z-stick gen5. now supports smartstart device installation when used with compatible software connect z-wave devices simply by scanning compatible qr codes
- Faster than standard z-stick gen5. plus edition offers a 50% speed performance when communicating securely vs. non plus edition. and can be used to upgrade the firmware of compatible z-wave plus devices that can accept ota / wireless firmware upgrades
- Works with raspberry pi, windows, mac, linux to create a z wave hub for control of z-wave and z-wave plus devices
- More secure than standard z-stick gen5. upgraded to offer z-wave security 2 (s2) encryption, this plus edition of z-stick is enhanced with aes 128-bit encryption, ecdh key exchange, and pro-security grade ul 1023 compliance
- Compatible with z-wave enabled, home automation software including home assistant, home seer, indigo 7, openhab, and openhab2. no software included. z-wave plus certified.z-wave certification number:zc10-19126822
SHOWview product -
Product Highlights
- Each box comes with 1 monitor and 1 clamp to detect 1 load, the clamp meters up to 60 amps under 230v voltages. works on single phase power system.
- Compatible with certified z-wave gateways including: fibaro home centre 2, indigo 7, homeseer, vera, open z-wave, openhub, zipabox, qolsys iq panel, home assistant and more.
- Keep track of real-time electricity usage with 99% accuracy that reflects how much energy is costing you with this wireless z-wave plus monitor (max 492 feet wireless range).
- The monitor connects to mains power of the 1 phase system in the electricity box, as such a professional electrician may be required for installation.
- Z-wave plus certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. certification number: zc10-15120010.
SHOWview product -
Product Highlights
- 2 year battery life. motion sensor : with a 5 meter range and a 120 degree field of view
- Works with certified z-wave gateways and tested with fibaro, indigo 7, openhab, smartthings, vera and more.
- 6-in-1 z-wave plus multisensor: motion, humidity, temperature, light lux, uv, vibration sensor.
- Super-small at 1.8 inches. can be installed in corner, in-wall, on shelf or in downlight.
- Z-wave plus certified. certification number: zc10-15080001
SHOWview product -
Product Highlights
- Local connection, no cloud required - trisensor 8 is equipped with the latest smart home standard of the z-wave 800 series. this means that the highest security standards are met with 2 factor authentication, aes 128 encryption and z-wave secure. the connection to your smart home centre is made locally without a connection to the cloud.
- Temperature measurement from -10°c to 50°c - the unique design ensures optimum ventilation of the temperature sensor. this means that temperature changes can be recognised more quickly and warnings about rapidly rising temperatures in your smart home can be sent immediately.
- Smart home, motion detector, light sensor, temperature sensor, smartthings, z-wave, long range, 800 series, aeotec, homeassistant, works with smartthings.
- Motion detector with 120° field of view and 10m range - trisensor 8 is equipped with accurate ir sensor technology to detect the smallest movements of people at a range of up to 10m. the sensitivity can be set in 3 levels (high, medium and low) and the motion detection period can be set in stages between 30 seconds and one hour.
- Light sensor with a measuring range of 0 - 30,000 lux - trisensor 8 measures the light intensity in the smart home precisely and just in time. this allows lights to be automated depending on the amount of daylight. in addition, roller shutters and external blinds, for example, can be intelligently automated depending on the incidence of sunlight.
- Range of up to 1.5 km - z-wave long range - thanks to the latest z-wave 800 chip, trisensor 8 has the ability to transmit over a range of up to 1.5 km to the smart home hub. this feature is not yet available in europe, but a firmware update will make this function available in the future.
SHOWview product
Coupon copied
