10 Best
Boost Voltages
-
-
Product Highlights
- The xl6009 module is a non-isolated step-up voltage converter featuring adjustable output voltage and new generation(xl6009e1 core chip) high-frequency(400khz) switching technique, the performance is much better than lm2577.
- Esigned for multiple practical applications that need a boost voltage, such as diy an output adjustable mobile power, temporarily set up power supply in the outdoor, boost the charger, etc.
- 6 packs xl6009 dc-dc adjustable step-up power converter module. input: dc 3 v to 30 v, optimum operating voltage range: 5v to 30v. output: dc 5 v to 35 v voltage is continuously adjustable, maximum output current is 4 a.
- Simple operation. using a mini screwdriver to step up / down output voltage by turning slotted screw on the blue trimpot, and monitor voltage with multimeter to achieve the expected voltage, clockwise to reduce voltage and counterclockwise to increase voltage. (1 circle means +/- 1v)
- Warning: this is only for the increasing output voltage; the input voltage should not be over 30 v to avoid any possible damage.
SHOWview product -
Product Highlights
- Input voltage: dc10-60v (directly input 10-60v without a jumper cap to select the voltage).. input current: 20a (max) more than 1, please add a fan for heat dissipation (with a fan for heat dissipation, the input current can be 2 when the input voltage is 12-24v). static working current: 15ma (when 12v rises to 20v, the higher the output voltage, the higher the static c...
- Input overcurrent protection: yes (input exceeds 2, automatic protection, power supply does not boost). short-circuit protection: yes (input 30a fuse) double short-circuit protection, use more. input reverse connection protection: yes (150a power mos tube anti-reverse. it can be reversed for a long time).
- Module name: 1200w boost constant current module. module nature: non-isolated boost module (boost).
- Constant current range: 0.5-18a (+/-0.3a). input anti-reverse: yes (150a power mos anti-reverse). low battery protection: yes (9-50v adjustable). working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high). working frequency: 150khz.
- Widely application:1. diy a regulated power supply, input 12v, the output can be adjusted 12-80v; 2. as a car power supply, power your laptop, pda or a variety of digital products; 3. diy a high-power notebook mobile power; 4. solar panel voltage regulator; 5. drive high-power led lights.
SHOWview product -
Product Highlights
- 3. it can be boosted and bucked, the output voltage can be adjusted arbitrarily from 0.5-30v, and the limit current can be adjusted arbitrarily from 0-4a. 4. the button controls the on/off state of the output terminal, and can be set to be on or off by default after power-on.
- Input voltage: 5.5-30v (when the input voltage is 5v, it can also realize buck-boost, but the measurement of voltage and current is not accurate; when it is lower than 4.7v, it will be under-voltage protection).
- 1. lcd can display input and output voltage, output current and output power. 2. the input terminal is protected against reverse connection, and the reverse connection will not burn out. 3. the output terminal is anti-inverting, and there is no need to add an anti-inverting diode when charging the battery.
- 6. using a buck-boost chip as the main controller, an external 60v 75a mos tube as a switch tube, dual 60v 5a ss56 schottky for rectification, sufficient voltage resistance and sufficient power, which is better than the immature xl6009/lm2577 solution on the market (many pieces of pressure and flow resistance performance can not reach).
- Output voltage: 0.5-30v. output current: it can work stably at 3a for a long time, and it can reach 4a with enhanced heat dissipation. output power: natural heat dissipation 35w, enhanced heat dissipation 50w.
SHOWview product -
-
Product Highlights
- Input voltage: 2-24v, output voltage: 2-28v
- Module size: 23 x 16.3mm/0.91 x 0.64inch(l*w)
- Adjustable dc to dc step up boost converter module with over current protection and over temperature protection
- Maximum output current: 2a, maximum conversion efficiency: 95%
- 0
SHOWview product -
Product Highlights
- Package including: 10 pack of xl6009 dc module, which consist of high-precision potentiometer (clockwise boost, counterclockwise buck), high frequency filter capacitor and power indicator.
- Feature: high efficiency and low ripple with power indicator. in addition to the current limiting and voltage regulation step-down function. high reliability, strong vibration resistance, good electromechanical performance.
- Super material: it is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper. it is long lasting and durable for you to use.
- Input and output: input range: 3.8v ~ 32v.output range: 1.25v ~ 35v.input current: 3a (maximum), no-load 18ma (5v input, 8v output, no-load less than 18ma. the higher the voltage, the larger the no-load current.).conversion efficiency: <94% (the greater the pressure difference, the lower the efficiency).switching frequency: 400khz. output ripple: 50mv (higher voltage, l...
- A wide range of applications: this module can be applied to the buck field where the input voltage is higher than the output voltage, such as battery, power transformer, diy adjustable power supply, and so on. maintain stable output voltage and limit the output current over a range of input voltages. used forbooster voltage stabilizer power supply, diy adjustable mobile...
SHOWview product -
Product Highlights
- Input voltage range: 2.5v-vout
- When the default output is 12v, the led indicator consumes approximately 1ma of current if the indicator light is turned off, the input current at no load is less than 1ma
- Output voltage: can be set to 5/8/9/12 v (default 12v)
- Tips: when the 3.7v lithium battery is input, it can output 5v/1a, 8v/0.5a, 9v/0.45a, 12v/0.3a; when the 5v lithium battery is input, it can output 8v/0.7a, 9v/0.7a, 12v/0.5a
- Attention: the input voltage must not be greater than nominal voltage, otherwise it will burn out the template; the input power must be greater than the output power, or the output voltage will be less than the nominal voltage
SHOWview product -
Product Highlights
- [best attention service] - we promise to offer 100% after-sale to all customers. if you have any questions about how our high voltage transreplacement former compares. please contact us as soon as possible. our customer service will give you a satisfactory answer within 24 hours. our working time is 9:00 a.m. to 6:00 p.m.
- [easy installation] - the module input connector and output connector, the red and green wire is the input connector, the power connector is red and green red wire: """" + """" green wire """" - """", two thick wires that they the same color is the high voltage output, the fixed output end of the appropriate arc distance, and the input end is connected to a battery able...
- [input voltage] - dc 3v to 6v. input current: 2a - 5a. high pressure type: type of pulse current output voltage: 400000v (please pay attention to safety). high pressure discharge distance between: 10mm - 20mm. use the 1 minute time limit to avoid burns.
- [best attention service] - we promise to offer 100% after-sale to all customers. if you have any questions about how our high voltage transreplacement former compares. please contact us as soon as possible. our customer service will give you a satisfactory answer within 24 hours. our working time is 9:00 a.m. to 6:00 p.m.
- [best attention service] - we promise to offer 100% after-sale to all customers. if you have any questions about how our high voltage transreplacement former compares. please contact us as soon as possible. our customer service will give you a satisfactory answer within 24 hours. our working time is 9:00 a.m. to 6:00 p.m.
- [superior quality] - transformer high voltage is made of high quality electronic material, this high voltage generator is sturdy, not easy to age, and wear-resistant to ensure maximum strength and durability replacement for long-term use.
SHOWview product -
Product Highlights
- ✅board size: 36 x 17 x 14 mm / 1.44 x 0.68 x 0.56inch
- ✅widely use for storage battery, power transformers, diy adjustable regulated power supply, industrial equipment, 5v, 9v, 12v, 28v output, etc
- ✅dc 2-24v input and 5v-28v adjustable voltage output with high power conversion efficiency up to 93%
- ✅max output current: 2a (1a is recommended for a long time)
- ✅package content:5 x boost converter module, 1 x 19.6inch 24awg wire
SHOWview product -
Product Highlights
- 【multiple protection functions】power supply regulator module has multiple protection, short circuit, over current, over temperature, over power, over voltage protection, charging anti-backflow protection
- 【easy adjustment】compact structure, dc‑dc usb power module with adjustment knob, manual adjustment of output voltage, clockwise to increase.
- 【voltage conversion】usb adjustable power supply module, can convert 5v voltage to 3.3v 9v 12v 24v, with strong practicability.
- 【usb connection】the usb power is 3w and can be connected through a mobile phone charger or a usb 5v adapter.
- 【beautiful shell】the voltage regulator has beautiful case and can display the output voltage with red light on the display.
SHOWview product
Coupon copied
