10 Best
Unknown Dimmer Switches
-
Product Highlights- Touch switch on/off: the finger touches the item, the touch time is less than 5 seconds, it is on/off switch function for led light.
- Easy to install: the touch switch comes with adhesive tape for mounting the switch to any clean, flat surface.
- Input voltage: dc12v/dc24v input current: 3a
- Touch dimmer switch: touching the item, when the touch time is more than 5 seconds, it is dimming function, the brightness will be raise to the highest or fallen to the lowest.
- Widely used: the touch sensor switch can drive led lighting products directly, such as led cabinet lights, led rigid bar, led strips and led panel light.
SHOWview product -
Product Highlights
- Check your bulbs before ordering suitable for all 240v ac incandescent/halogen filament bulbs. not suitable for led bulbs. for use with 2 or 3 core flexes - earth terminal is present
- With illuminated wheel and internal fuse
- Please note: not suitable for led bulbs, 12v dc low voltage lighting or transformers.
- Rated for lamps 20-160 watts 220-240v ac, 50/60 hz - not suitable for led bulbs
- Minimum load is 20 watts - loads lower than this will cause malfunction. maximum load is 160 watts - loads greater than this will cause malfunction. - not suitable for leds, 12v dc lighting or transformers. -
SHOWview product -
Product Highlights
- Supply voltage: dc 12v 5w~25w; operation type: touch; cable length: 24cm/9.44 inch; mounting hole dia.: 16mm/0.63 inch; indicator light color: white; switch color: silver tone
- Smoothly dimming - save energy by reducing the light level in your indoor or outdoor lights with this light dimmer. no flicker at low brightness, very smooth.
- The touch dimmer switch is an electrical switch, made of an abs plastic shell. for home lights, such as table lamps, ceiling lights, pendant lights, and other smart appliances.
- This touch dimmer switch for led strip lights is a controller that can adjust the light to the appropriate light brightness in accordance with your actual need.
- The touch switch cannot be used in an ac circuit. don't exceed the rating volts!
SHOWview product -
Product Highlights
- Material: made of friendly material abs. the product voltage is 110-230v, the rated power is 50hz or 60hz/15-80w for incandescent lamp or 3w-20w for led bulb light, and the rated current is 350ma (maximum). the touch dimmer switch is reliable and solid and can serve you for a long time.
- Simple and quick to install: comes with 4 different colored wires and wire caps, which makes the touch sensor dimmer easy to operate. after you have this dimmer, you don't need to replace your broken light bulbs by purchasing the bulb again.note: the touch lamp switches can be used on metal base lamp only.
- 3-way dimmable touch control tech: offering 3 level brightness (low, medium, high), compact profile makes it easy to assemble to lamp base, suitable for replace defective switch of bedside nightstand lamp, side table lamp, decorative lamp or accent lamp.no delay, no noise, no interruption to your family.
- Double-ended electrical test pen: it has a cross-head and a single-head, and a dual-purpose test pen. the tip is made of steel material, with good conductivity, and can quickly and effectively induce current. it is used for home and professional use.
- Wide application: perfect for tabletop lamp, holiday lights and other mood lighting. the replacement touch switch is handy for anyone to adjust desired lighting for sleeping, amusing, reading or working.only suitable for thyristor dimmable led, and incandescent bulbs.
SHOWview product -
Product Highlights
- [technical adavantage] 1-gang 2-way control mechanism. zero noise and flicker-free dimming of this trailing edge dimmer switch provides the best performance for dimmable bulb; with the soft start function overload protection, over current protection, over-temperature protection, the led dimmer light ensures the safety.
- [reliable use] this dimmer switch for led lights supports dimmable led/cfl bulbs (max 100w) and inc bulbs (max 150w). zigtiger dimmer switch comes with ce and rohs certified. flame-retardant material and built-in overheat protection for added safety.
- [smooth modern plate profile] easy to install diy in your wall box(min. 25 mm) and no require neutral line. the dimmer switch is ideally suite for old construction and refurbishment projects, provides optimized dimming for led lamps and for incandescent operation, brush steel technology makes this led dimmer switch more fashion.
- [energy efficiency & soft start] dim the lights from 0% to 100% to save energy and extend bulb life for your expensive lamps, lets your eyes gradually adapt to bright light or darkness; dimmer light switch not only reduces eyestrain and protects your eyes from overly bright lights, but also saves money and make your home more comfortable.
- [worry-free warranty & customer service] zigtiger is committed to the quality and upgrading of construction in various countries around the world. it will make your home smarter,safer and supported with 3-year warranty over the worldwide. if you have any problems about the dimmer switches or need other support, please feel free to contact us through amazon, we will repl...
SHOWview product -
Product Highlights
- Soft start: the led dimmer switch provides the best dimming performance for dimmable led bulbs; gradually turns lights on, allowing your eyes to adjust to the change in light and gradually fade off.
- Energy savings: this led dimmer switch works with max 100 watts of dimmable led bulbs or 150 watts of incandescent/halogen bulbs, min 3 watts for led bulbs. offer a uniform dimming range from 0 to 100% to cut energy costs and extend bulb life.
- Easy retrofit: this dimmer switch can be fitted into wall box with a minimum depth of 25 mm and easy to install using your home's existing wiring without neutral line.
- Technical advantage: 2-gang 2-way control mechanism. the iolloi trailing edge dimmer switch not only provides you with zero noise and flicker-free dimming, but also ensures its excellent quality with overload protection, over current protection, over temperature protection to meet all safety requirements to the most.
- Safety guarantee & customer service: ce and rohs certification, 30 days hassle-free returns, 3-year warranty. if you have any problems about the dimmer light switches or need any other support, please feel free to contact us through amazon, we will respond within 15 hours.
SHOWview product -
Product Highlights
- ✔️【simple to install】connection via screw terminals, don't solder iron welding terminals, built-in rotary switch and knob dimming control, equipped with wiring terminals, easy to use.the rotary dimmer has a precise brightness control range, is versatile and flexible, and is suitable for all dimmable lamps.
- ✔️【widely applications】led dimmer switch working voltage: 220-240vac, led lamp: 3-100w; the led dimmer switch suitable for all kinds of lamps, electrical appliances, transformers, etc. with power control lines, low voltage halogen lamp transformers, incandescent lamps.
- ✔️【please attention】the inline led dimmer switch fits all dimmable lamps well, but please confirm whether your lamps are marked with "dimmable" before purchasing, if it is not, you cannot use this dimmer for dimming, you can only turn it on and off.
- ✔️【premium material & quality】made of high-quality flame-retardant materials, the internal high-quality circuit board is safe, reliable, and durable. besides, the led dimmer switch can let your eyes gradually adapt to bright light or darkness; reduce eyestrain and protect your eyes from overly bright lights; save money and make your home more comfortable.
- ✔️【package & fashionable gift】comes with 1pc dimmer switch, a pack of screw accessories and instruction. when the led dimmer switch is turned, it will surprise us, and the brightness of the light can be effectively adjusted according to the requirements of the atmosphere at the time, adding atmosphere to our lives.perfect housewarming gift, birthday or christmas gift id...
SHOWview product -
Product Highlights
- Rating voltage: dc 5v to 24v; rating power: 5v<30w, 12v<75w, 24v<144w; dc plug size: 5.5x2.1mm / 0.22"x0.08"; total length: 26mm / 7.87 inch; remote controller size: 85x40mm / 3.35"x1.58"
- 1. installed the receiver on your led strip by connecting the dc plugs 2. use your remote controller to control the led strip
- A type of dimmer switch widely used for controlling the brightness and the flash of single color led strip in the home indoor areas.
- Remote controller can help you control the led strip better. different dynamic modes and brightness for you to choose, choose the settings you want. the led strip dimmer also has a memory function.when it power off, you don't need to select the mode and brightness level again.
- Please check the dc plug size before buying. female dc plug is for power input and male dc plug is for load output.
SHOWview product -
Product Highlights
- Supply voltage: dc 12v 10w; operation type: touch; mounting hole size: 16mm/0.63 inch; cable length: 15cm/5.9 inch; color: black
- The led dimmer is recessed installation, please see the picture for wiring.
- The touch dimmer switch is an electrical switch, made of abs plastic shell. for home lights, such as table lamps, ceiling lights.
- Smoothly dimming - save energy by reducing the light level in your indoor or outdoor lights with this light dimmer. no flicker at low brightness, very smooth.
- The touch switch cannot be used in an ac circuit. don't exceed the rating volts!
SHOWview product
Coupon copied
