10 Best
Uxcell Die Cutting Machines
-
Product Highlights- Thread diameter:m5;thread pitch:0.8;total diameter:20mm;total thickness:7mm
- Different sizes can be chosen on this listing. please check what you need before purchasing.
- Threading dies are used to form or cut a male thread on the outside of rods or bars. threading dies provide precision in cutting and extend the life of a die by reducing wear.
- Thread diameter:4#-40;thread pitch:1/40;total diameter:20mm;total thickness:5mm
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SHOWview product -
Product Highlights
- Thread diameter:m18;thread pitch:1;total diameter:45mm;total thickness:11mm
- Different sizes can be chosen on this listing. please check what you need before purchasing.
- Threading dies are used to form or cut a male thread on the outside of rods or bars. threading dies provide precision in cutting and extend the life of a die by reducing wear.
- Thread diameter:4#-40;thread pitch:1/40;total diameter:20mm;total thickness:5mm
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SHOWview product -
Product Highlights
- Applications: can process, correct or clean the external threads. suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. great for maintenance and repair work on pipes, boards and machinery.
- Easy to use: the positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. the end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Round die: thread size: m5 x 0.8 (right hand); outside diameter (od): 20mm / 0.79"; thickness: 7mm / 0.28"; fine grinding. made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Features: conical locking hole, strong locking and not loose. perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. the surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Tips: it needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. the bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. excessive diameter can easily cause difficult cutting and lead to...
SHOWview product -
Product Highlights
- Applications: can process, correct or clean the external threads. suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. great for maintenance and repair work on pipes, boards and machinery.
- Easy to use: the positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. the end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Round die: thread size: m7 x 0.5 (right hand); outside diameter (od): 25mm / 0.98"; thickness: 7mm / 0.28"; fine grinding. made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Features: conical locking hole, strong locking and not loose. perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. the surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Tips: it needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. the bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. excessive diameter can easily cause difficult cutting and lead to...
SHOWview product -
Product Highlights
- Applications: can process, correct or clean the external threads. suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. great for maintenance and repair work on pipes, boards and machinery.
- Easy to use: the positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. the end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Round die: thread size: m12 x 0.5; outside diameter (od): 38mm / 1.5"; thickness: 10mm / 0.4"; accuracy class: 6g; fine grinding. made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Features: conical locking hole, strong locking and not loose. perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. the surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Tips: it needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. the bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. excessive diameter can easily cause difficult cutting and lead to...
SHOWview product -
Product Highlights
- Applications: can process, correct or clean the external threads. suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. great for maintenance and repair work on pipes, boards and machinery.
- Easy to use: the positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. the end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Round die: thread size: m14 x 1.5 (right hand); outside diameter (od): 38mm / 1.5"; thickness: 14mm / 0.55"; fine grinding. made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Features: conical locking hole, strong locking and not loose. perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. the surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Tips: it needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. the bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. excessive diameter can easily cause difficult cutting and lead to...
SHOWview product -
Product Highlights
- There are a variety of ways in which threading dies function. threading dies cut a male thread and are used with taps that cut the mating female threads.
- Different sizes can be chosen on this listing. please check what you need before purchasing.
- Threading dies are used to form or cut a male thread on the outside of rods or bars. threading dies provide precision in cutting and extend the life of a die by reducing wear.
- Thread diameter:1/2-20 unf ;thread pitch: 1/20;total diameter:38mm;total thickness:10mm
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SHOWview product -
Product Highlights
- Applications: the round die can process, correct or clean the external threads. the thread tap is suitable for processing through hole or shallow hole female threads. suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Easy to use: round dies can be used with die wrench (not included). the fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. machine taps are used on drill presses, tapping machines, cnc and milling machines.
- Tap & die set: m15 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. clear threads without burrs, right hand tapping direction. tap size: thread length: 23mm / 0.91"; overall length: 87mm / 3.43"; square shank: 9mm / 0.35"; die size: outside diameter (od): 38mm / 1.5"; thickness: 10mm / 0.39"
- Features: high speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Tips: used with tapping oil can get higher quality threads and make taps and dies more durable. suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. it needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
SHOWview product -
Product Highlights
- Widely used: accurately cut, repair or clean threads. straight flute tap process through or shallow blind holes and remove chips downward. die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Reliable material: m2 (6542) high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9sicr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- Metric tap and die set: thread size: m20 x 1.5 (right hand); tap total length: 89mm / 3.5"; tap thread length: 34mm / 1.34"; tap square shank width: 12mm / 0.47"; tap accuracy: h2; die outside diameter: 45mm / 1.77"; die thickness: 14mm / 0.55"
- Features: tap & die with clear threads without burrs, right hand tapping direction. thread die designed with conical lock hole, strong locking force and no loosening. uncoated tools feature just the base substrate, great for a wide range of applications.
- How to use: die is used with die stock wrench (not included). the fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .machine tap is used in drill presses, tapping, cnc and milling machines. apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
SHOWview product -
Product Highlights
- Thread diameter:4#-40unc;thread pitch:1/40;total diameter:20mm;total thickness:5mm
- Different sizes can be chosen on this listing. please check what you need before purchasing.
- Threading dies are used to form or cut a male thread on the outside of rods or bars. threading dies provide precision in cutting and extend the life of a die by reducing wear.
- Thread diameter:4#-40;thread pitch:1/40;total diameter:20mm;total thickness:5mm
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SHOWview product
Coupon copied
